12mm Rotary Encoder with LED Type DPL12 Series Key Features I 12mm rotary encoder I Incremental type I Push on switch option I Various shaft lengths I LED color options I Detent options Applications I Power supplies I Inverters I Servo systems I Electrical systems in difficult environments 12mm rotary incremental encoder with LED for use in electronic equipment. Can be supplied with or without switch with customization to standard options. Characteristics - Electrical Pulses: 24 Contact Rating: 0.5mA 5V DC Dielectric Strength: 300VAC / 1mA, 1 minute Insulation Resistance (min): 100M at 250VAC Operating Speed (RPM): 60 RPM Switch Power Rating (where fitted): 5V DC 10mA Switch Contact Resistance: 100m max Electrical Travel: Continuous Rotational Noise: t2 = 2.0ms max (see below) Chattering: t1 & t3 = 3.0ms max (see below) Code Off area V = 3.5V or more. Code on area V=1.5V or less LED Switch - Dual color - see below for characteristics No Switch - Single color - see below for characteristics Color options No Switch - White, Red, Green, Blue Switch - 1: Blue/Green, 2: Blue/Orange, 3: Green/Red Characteristics - Mechanical Output Signal Format Total Mechanical Travel: Continuous Detents: 0, 24 Switch Operating Force: 400+/- 200gf Switch Travel: 0.5mm Shaft Type: F - Flatted, K - Knurled Shaft Length (from Mounting Surface): See chart below Shaft Rotational Direction Signal Format A (Terminal A-C) Clockwise B (Terminal B-C) Characteristics - Environmental Operating Temperature: -40 to +85C Rotational Life: 30,000 cycles A (Terminal A-C) Anticlockwise Soldering Condition Manual Soldering - Bit temperature 300C or less Application time 3 seconds max. B (Terminal B-C) Dip Soldering - Preheating - Surface temperature of board 100C or less - preheating time < 1 minute Soldering - Solder temperature 260 +/-5C Immersion time 3 +/-1 second 1-1773449-0 CIS BI 06/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help 12mm Rotary Encoder with LED Type DPL12 Series LED Characteristics - Without Switch Reverse Current: [IR] = 10uA Reverse Voltage: 5V Operating Temperature: -40 to +85C Forward Voltage Emitted Color Power Dissipation DC Forward Current Typical Max. White 100mW 20mA 3.3V 4.0V Blue 100mW 20mA 3.2V 4.0V Red 58mW 25mA 1.8V 2.3V Green 48mW 20mA 2.0V 2.4V LED Characteristics - With Switch Reverse Current: [IR] = 10uA Reverse Voltage: 5V Operating Temperature: -40 to +85C Forward Voltage Emitted Color Power Dissipation DC Forward Current Peak Forward Current Typical Max. Red 170mW 30mA 185mA 1.95V 2.5V Orange 75mW 30mA 195mA 2.1V 2.5V Blue 105mW 30mA 150mA 3.3V 4.0V Green 105mW 25mA 130mA 3.1V 3.8V Dimensions - DPL12V Dimensions - DPL12H 1-1773449-0 CIS BI 06/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help 12mm Rotary Encoder with LED Type DPL12 Series Dimensions - DPL12SV Dimensions - DPL12SH Shaft Length - Without Switch Type K F LED Color Codes Dim L (from mounting surface) Options (mm) 24 only Switch Option L (from mounting surface) 17.5 20 25 F 5 7 12 Shaft Length - With Switch Type K F Dim L (from mounting surface) Options (mm) 25 only L (from mounting surface) 18.5 21 26 F 5 7 12 Code 1 Description Blue / Green 2 Blue / Orange 3 Green / Red W White Switch (Dual Color) No Switch R Red (Single Color) G Green B Blue How to Order DPL12 V N 24 Common Part Orientation Detent Pulses DPL12 no switch V - Vertical N - None DPL12S with switch H - Horizontal 24 - 24 clicks 24 - 24 pulses A 20 Bush Details Shaft Length A - 5mm See relevant table F R Shaft Style LED Color F - Flatted See relevant table K - Knurled TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.