BA3833F
Audio ICs
1/2
Spectral analysis band-p ass filter for mini
component stereo
BA3833F
The BA3833F is a 4+1 band-pass filter IC for spectrum analyzer w ith built-in recording indicator output.
External components can be reduced largely by incorporating all capacitors that compose a filter. This enables to make
set smaller and more highly-reliable.
zApplications zExternal dimensions (Unit : mm)
CD radio cassette player , mini component stereo, car stereo
zFeatures
1) S pectral analysis 4-band band-p ass filter and
rectifier circuit (with internal cap acitor).
2) Detector circuit for every frequency.
3) Parallel output with internal Lch / Rch mixing-up function.
4) Single battery operation in 5 to 6 V.
zA bsolute maximum ratings (Ta=25°C)
Parameter Symbol Limits Unit
Supply voltage V
CC
Power dissipation Pd 550 mW
Operating temperature range Topr 40 to +85
Storage temperature range Tstg 55 to +125
9V
C
C
For an operation with Ta=25 C or more, 5.5mW shall be reduced per 1 C.
A glass epoxy bpard 50mm
x
50mm
x
1.6mm in thickness shall be mounted.
zRecommended operating conditions (Ta=25°C)
Parameter Symbol Min. Typ. Max. Unit
VIN 4.5 5 8 VSupply voltage
SOP18
0.4
±
0.11.27
1
18
11.2
±
0.2
9
10
4.4
±
0.2
7.8
±
0.3
0.11
1.8
±
0.1
0.15
0.15
±
0.1
0.3Min.
BA3833F
Audio ICs
2/2
zElectrical characteristics
(Unless specified particularly, Ta=25°C, VCC=5V, RL=10M, VIN= -30dBV and reset OFF)
Parameter Symbol Min. Typ. Max.
Circuit current upon no signal
Maximum output level
Output offset voltage
Standard output level 1
Standard output level 2
Standard output level 3
Standard output level 4
Standard output level 5
Leak current upon reset
terminal LOW
Reset rerminal H level
Reset terminal L level
I
Q
V
OM
V
OS
V
O1
V
O2
V
O3
V
O4
V
O5
I
R
V
IH
V
IL
−−
−−
4.0
1.00
1.00
1.00
1.00
0.80
3.5
4
4.8
30
1.80
1.80
1.80
1.80
1.50
0.5
8
150
2.30
2.30
2.30
2.30
1.85
10
1.5
Unit
mA
V
mV
V
V
V
V
V
V
V
µA
Conditions
Upon no input
Upon no input
V
IN
= 14dBV,every output
measurement
f
IN
=125H
Z
, fo
1
output
f
IN
=500H
Z
, fo
2
output
f
IN
=2kH
Z
, fo
3
output
f
IN
=8kH
Z
, fo
4
output
f
IN
=1kH
Z
, fo
5
output
Pin18=0V
Designed according to Q=1.
Radiation resistance is not included in the design.
zA pplication circuit
1
2
3
4
10µ
15k
15k
150k
100k
3300p
10µ
5
6
7
8
9
18
17
16
15
14
13
12
11
10
DET
RESET
Bias
RESET
V
CC
BPF
BPF DET
BPF DET
BPF DET
DET
Refference
Current f
01
f
02
f
03
f
04
f
LCD
Driver
(Units R : , C : F)
LCD
+
+
+
Appendix
Appendix1-Rev1.0
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.