Thin-Film Cascadable Amplifier Module 10 to 200 MHz Technical Data UTO/UTC 211 Series Features * Frequency Range: 10 to 200 MHz * Ultra Low Noise: 2.0 dB (Typ) * Low Current Drain: 30 mA (Typ) * Temperature Compensated * Surface Mount Option * High Dynamic Range Applications * RF Front Ends * IF Medical Systems * Surface Mount Assembly Pin Configuration The 211 Series is a thin-film bipolar, medium-gain, low-noise, RF amplifier suitable for front end design. It utilizes lossless feedback circuitry for low power consumption and high dynamic range. Resistive feedback and active bias provide temperature compensation and increased immunity to bias voltage variations. The 211 Series is available in three packages: the surface mount PlanarPak PP-38 (.375 in. x .375 in.) case, the TO-8 hermetic case and the connectorized TC-1A case. UTO--TO-8T RF IN GROUND RFOUT V+ CASE GROUND UTC--TC-1A RF IN RF OUT V+ Maximum Ratings Schematic V+ RFOUT dB Parameter G i RFIN Description DC Voltage Continuous RF Input Power Operating Case Temperature Storage Temperature "R" Series Burn-In Temperature Maximum 17 Volts +17 dBm -55 to +125C -62 to +150C +125C Thermal Characteristics1 JC Active Transistor Power Dissipation Junction Temperature Above Case Temperature MTBF (MIL-HDBK-217E, AUF @ 90C) 120C/W 250 mW 30C 604,000 Hrs. Weight: (typical) PPA--0.5 grams; UTO -- 2.1 grams; UTC --21.5 grams 2 Electrical Specifications (Measured in 50 system @ +15 VDC nominal unless otherwise noted) Symbol BW GP -- NF P 1dB -- -- IP3 IP2 HP2 ID Typical Guaranteed Specifications TC = 25C TC = 0 to 50C TC = -55 to +85C Characteristic Frequency Range Small Signal Gain (Min.) Gain Flatness (Max.) Noise Figure (Max.) Power Output @ +1 dB Comp. (Min.) Input VSWR (Max.) Output VSWR (Max.) Two Tone 3rd Order Intercept Point Two Tone 2nd Order Intercept Point One Tone 2nd Harmonic Intercept Point DC Current 10-200 7.5 1.0 2.7 +17.0 2.0:1 2.0:1 -- -- -- -- 10-200 8.5 0.5 2.0 +20.0 <1.3:1 <1.3:1 +31.0 +45.0 +51.0 30 Unit MHz dB dB dB dBm -- -- dBm dBm dBm mA 10-200 7.5 1.0 3.0 16.0 2.0:1 2.0:1 -- -- -- -- Typical Performance Over Temperature (@ +15 VDC unless otherwise noted) Key: +25C +85C -55C Gain Noise Figure 10 3.0 Noise Figure, dB +12 VDC Gain, dB 9 8 7 0 100 200 300 400 2.5 2.0 +12 VDC 1.5 10 500 100 Frequency, MHz Input VSWR 17 13 10 100 200 2.5 2.0 2.0 +12 VDC 1.5 +12 VDC 15 300 1.0 10 Frequency, MHz 100 200 300 1.0 10 400 Second-Order Intercept Point 36 45 55 30 10 40 35 +12 VDC 100 200 Frequency, MHz 300 HP2, dBm 60 32 30 10 +12 VDC 100 200 Frequency, MHz 200 300 400 Second-Harmonic Intercept Point 50 34 100 Frequency, MHz 38 IP2, dBm IP3, dBm +12 VDC 1.5 Frequency, MHz Third-Order Intercept Point 300 Output VSWR 2.5 VSWR 19 VSWR Power Output @ 1 dB Gain Compression, dBm Power Output 21 200 Frequency, MHz 50 45 300 40 10 100 200 Frequency, MHz 300 3 Automatic Network Analyzer Measurements (Typical production unit @ +25C ambient) Numerical Readings FREQUENCY MHz 100.0 120.0 140.0 160.0 180.0 200.0 220.0 240.0 260.0 280.0 300.0 400.0 500.0 600.0 700.0 800.0 900.0 1000.0 Bias = 15.00 Volts VSWR IN GAIN dB PHASE DEGREES PHASE DEV GROUP DELAY ns VSWR OUT ISOLATION dB 1.11 1.11 1.11 1.11 1.10 1.09 1.08 1.07 1.08 1.12 1.18 1.94 4.24 9.41 18.23 28.35 42.46 54.08 8.58 8.63 8.65 8.68 8.72 8.75 8.81 8.85 8.89 8.94 8.96 8.87 7.32 4.25 .59 -2.64 -5.62 -8.68 -17.31 -20.98 -24.84 -28.96 -32.09 -36.20 -40.52 -44.62 -49.23 -54.14 -59.11 -88.75 -121.94 -148.67 -167.70 178.14 166.62 157.69 -.89 -.42 -.14 -.12 .87 .89 .70 .73 .25 -.52 -1.35 .00 .52 .55 .50 .50 .58 .58 .61 .66 .69 .75 .89 .88 .63 .45 .33 .31 .00 1.25 1.24 1.24 1.24 1.24 1.23 1.23 1.24 1.25 1.26 1.30 1.82 3.25 5.57 7.59 8.80 9.68 9.86 11.43 11.48 11.61 11.71 11.77 11.94 11.99 12.21 12.40 12.63 12.89 14.80 19.03 26.37 35.31 42.12 44.61 35.60 LINEARIZATION RANGE: 100.0 to 200.0 MHz S-Parameters Bias = 15.00 Volts S 11 S 21 FREQUENCY MHz Mag Ang 100.00 120.00 140.00 160.00 180.00 200.00 220.00 240.00 260.00 280.00 300.00 400.00 500.00 600.00 700.00 800.00 900.00 1000.00 .050 .053 .053 .051 .047 .043 .036 .031 .038 .055 .083 .324 .621 .813 .900 .942 .959 .965 76.5 71.3 69.4 68.6 70.4 75.3 94.0 106.8 138.1 154.5 160.4 145.0 112.8 81.9 59.2 41.9 27.8 14.2 dB S22 S12 Ang 8.598 -17.3 8.661 -21.1 9.671 -24.9 8.720 -28.8 8.767 -32.2 8.819 36.3 8.839 -40.5 8.882 -44.8 8.922 -49.3 8.975 -54.1 9.008 -59.2 8.888 -88.9 7.324 -121.8 4.218 -148.3 .594 -167.3 -2.592 178.4 -5.632 167.1 -8.691 158.3 dB -11.351 -11.420 -11.506 -11.658 -11.753 -11.884 -12.030 -12.203 -12.355 -12.578 -12.859 -14.795 -19.034 -26.501 -35.447 -41.899 -44.633 -35.760 Ang Mag -15.1 -18.9 -22.5 -26.1 -29.9 -33.5 -37.6 -41.3 -45.6 -50.2 -54.5 -80.8 -107.2 -124.8 -117.1 -101.8 -166.4 149.7 .106 .106 .107 .107 .106 .104 .103 .105 .111 .119 .133 .295 .534 .700 .775 .799 .812 .815 Ang 135.2 131.4 129.7 125.6 123.2 123.0 124.2 127.6 131.6 137.1 141.7 144.8 120.3 92.5 69.6 52.6 39.2 28.0 4 Product Options UTO - 509R Model Number Prefix UTOUTMPPA- Screening Option Blank = No Screening R = R-Series Screening For more information on R-Series screening, see Reliability Screening, Pub. 5963-3240E. Model Number UTC - 509-1 Model Number Prefix UTCConnector Option For TC-1 case the only connector option available is the -1. The -1 option consists of a SMA Female connector on both the input and output (see note). Model Number Note: R-Series screening is not available in the TC-1 case as the case is non-hermetic. Case Drawings TO-8T .300 TYP .200 +.002 .017 - 001 .150 TYP GROUND RF OUT 3 GLASS RING .060 DIA TYP (3X) 2 .50 .450 DIA DIA MAX 4 .150 TYP 1 45 CASE GROUND .031 .031 0.185 0.015 RF IN V+ APPROXIMATE WEIGHT 2.1 GRAMS NOTES (UNLESS OTHERWISE SPECIFIED): 1. DIMENSIONS ARE SPECIFIED IN INCHES 2. TOLERANCES: xx .02 xxx .010 TC-1A Teledyne Microwave Solutions * 650-691-9800 * 800-832-6869 www.teledynemicrowave.com * microwave@teledyne.com