HA www.vishay.com Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar FEATURES * Subminiature package size and light weight * Cylindrical case with axial or radial leads * 2 VDC to 50 VDC * 0.001 F to 68 F * Operating temperature range: - 55 C to + 125 C * High stability and reliability * Tested in accordance with MIL-PRF-49137 * Unique and comprehensive custom design capability ELECTRICAL CHARACTERISTICS Operating Temperature Range: - 55 C to + 125 C APPLICATIONS Capacitance: Measured at 120 Hz and 25 C with a maximum of 2.2 VDC bias and 1.0 VRMS signal. * Hearing aids * Portable communications Capacitance Tolerance: Standard tolerance is 20 % for ratings 0.1 F and above, and + 40 %, - 20 % for ratings below 0.1 F. Special tolerances are also available. * Space/avionics * Laptop computers Dissipation Factor: When measured simultaneously with capacitance, DF shall not exceed the value shown in the ratings tables. MECHANICAL SPECIFICATIONS DC Leakage Current (DCL Max.): When measured with DC voltage applied through a 1000 resistor for 5 min, DC leakage (A) shall not exceed: Leads are weldable and/or solderable. Solder coated nickel leads (type N32 per MIL-STD-1276) are standard on all case sizes. Special leads are available on request (e.g. bare nickle, gold plated nickle or ribbon leads). At 25 C: Leakage current shall not exceed the values listed in the Standard Ratings tables. Lead length is 1 1/2" [38.1 mm] minimum on non-polar parts. At 85 C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings tables. On polar parts the negative lead is 1 1/4" [31.8 mm] minimum and the positive lead is 1 1/2" [38.1 mm] minimum. At 125 C and 66 % of rated voltage: Leakage current shall not exceed 15 times the values listed in the Standard Ratings tables. Operating Voltage: Full working voltage up to 85 C. From 85 C to 125 C working voltage derates linearly to 66 % of the 85 C working voltage. ORDERING INFORMATION HA 1.0 35 C7 A (1) M MODEL CAPACITANCE IN F DC VOLTAGE RATING AT + 85 C CASE CODE LEAD CONFIGURATION CAPACITANCE TOLERANCE C = Polar N = Non-polar A = Axial R = Radial E = + 40 %, - 20 % M = 20 % K = 10 % J=5% Example of Part Number Code: HA1.0-35C7AM Note (1) To complete part number in rating tables, add A or R. Change suffix if special capacitance tolerance is required. Revision: 05-Dec-07 Document Number: 43003 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] POLAR STYLE AXIAL RADIAL 3rd dot and polarity D D d (+) 2nd dot 2nd dot L L 1st dot (-) 1st dot Tolerance dot Tolerance dot d (-) (+) E CASE CODE MAX. L MAX. D MAX. E E TOL. C0 0.100 [2.54] 0.057 [1.45] 0.030 [0.76] 0.015 [0.38] 0.007[0.18] C1 0.110 [2.80] 0.067 [1.70] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C2 0.125 [3.18] 0.067 [1.70] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C3 0.145 [3.68] 0.067 [1.70] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C4 0.160 [4.06] 0.070 [1.78] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C5 0.160 [4.06] 0.077 [1.96] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C6 0.190 [4.83] 0.077 [1.96] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C7 0.200 [5.08] 0.080 [2.03] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] C8 0.225 [5.72] 0.100 [2.54] 0.070 [1.78] 0.020 [0.51] 0.010 [0.25] C9 0.250 [6.35] 0.150 [3.81] 0.120 [3.05] 0.025 [0.64] 0.016 [0.41] d NON-POLAR STYLE AXIAL RADIAL T T W W d Tolerance dot Tolerance dot 2nd dot 2nd dot LR LA 1st dot 1st dot 3rd dot 3rd dot (-) (+) d E CASE CODE MAX. LA MAX. LR MAX. W MAX. T E E TOL. d N1 0.175 [4.45] 0.135 [3.43] 0.120 [3.05] 0.070 [1.78] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] N2 0.210 [5.33] 0.160 [4.06] 0.120 [3.05] 0.070 [1.78] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] N3 0.240 [6.10] 0.200 [5.08] 0.140 [3.56] 0.080 [2.03] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] N4 0.275 [6.99] 0.235 [5.97] 0.190 [4.83] 0.105 [2.67] 0.125 [3.18] 0.020 [0.51] 0.010 [0.25] N5 0.310 [7.87] 0.270 [6.86] 0.290 [7.37] 0.155 [3.94] 0.200 [5.08] 0.025 [0.64] 0.016 [0.41] Revision: 05-Dec-07 Document Number: 43003 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX. DF (%) 0.47 10 1.5 10 2.2 3.3 MAX. DCL AT + 25 C (A) CASE CODE PART NUMBER 0.5 C0 HA.47-2C0(1)M 0.5 C1 HA1.5-2C1(1)M 10 0.5 C2 HA2.2-2C2(1)M 10 0.5 C3 HA3.3-2C3(1)M 4.7 10 0.5 C4 HA4.7-2C4(1)M 6.8 10 0.5 C5 HA6.8-2C5(1)M 10 10 0.5 C6 HA10-2C6(1)M 15 10 0.5 C7 HA15-2C7(1)M 22 10 1.0 C8 HA22-2C8(1)M 68 10 1.5 C9 HA68-2C9(1)M C1 HA1.0-3C1(1)M 2 VDC AT + 85 C 3 VDC AT + 85 C 1.0 10 0.5 1.5 10 0.5 C2 HA1.5-3C2(1)M 2.2 10 0.5 C3 HA2.2-3C3(1)M 3.3 10 0.5 C4 HA3.3-3C4(1)M 4.7 10 0.5 C5 HA4.7-3C5(1)M 6.8 10 0.5 C6 HA6.8-3C6(1)M 10 10 0.5 C7 HA10-3C7(1)M 15 10 1.0 C8 HA15-3C8(1)M 47 10 1.5 C9 HA47-3C9(1)M 4 VDC AT + 85 C 0.33 10 0.5 C0 HA.33-4C0(1)M 0.68 8 0.5 C1 HA.68-4C1(1)M 1.0 8 0.5 C2 HA1.0-4C2(1)M 1.5 8 0.5 C3 HA1.5-4C3(1)M 2.2 8 0.5 C4 HA2.2-4C4(1)M 3.3 8 0.5 C5 HA3.3-4C5(1)M 4.7 8 0.5 C6 HA4.7-4C6(1)M 6.8 8 0.5 C7 HA6.8-4C7(1)M 10 8 1.0 C8 HA10-4C8(1)M 33 8 1.5 C9 HA33-4C9(1)M 0.22 10 0.5 C0 HA.22-6C0(1)M 0.47 6 0.5 C1 HA.47-6C1(1)M 0.68 6 0.5 C2 TC.68-6C2(1)M 1.0 6 0.5 C3 HA1.0-6C3(1)M 1.5 6 0.5 C4 HA1.5-6C4(1)M 2.2 6 0.5 C5 HA2.2-6C5(1)M 3.3 6 0.5 C6 HA3.3-6C6(1)M 4.7 6 0.5 C7 HA4.7-6C7(1)M 6.8 6 1.0 C8 HA6.8-6C8(1)M 22 6 1.5 C9 HA22-6C9(1)M 6 VDC AT + 85 C Note * Part number definition: (1) Add A for axial, R for radial Revision: 05-Dec-07 Document Number: 43003 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX. DF (%) 0.0010 10 0.0010 10 0.0015 0.0015 MAX. DCL AT + 25 C (A) CASE CODE PART NUMBER 0.5 C0 HA.0010-10C0(1)E 0.5 C1 HA.0010-10C1(1)E 10 0.5 C0 HA.0015-10C0(1)E 10 0.5 C1 HA.0015-10C1(1)E 0.0022 10 0.5 C0 HA.0022-10C0(1)E 0.0022 10 0.5 C1 HA.0022-10C1(1)E 0.0033 10 0.5 C0 HA.0033-10C0(1)E 0.0033 10 0.5 C1 HA.0033-10C1(1)E 0.0047 10 0.5 C0 HA.0047-10C0(1)E 0.0047 10 0.5 C1 HA.0047-10C1(1)E 0.15 10 0.5 C0 HA.15-10C0(1)M 0.33 6 0.5 C1 HA.33-10C1(1)M 0.47 6 0.5 C2 HA.47-10C2(1)M 0.68 6 0.5 C3 HA.68-10C3(1)M 1.0 6 0.5 C4 HA1.0-10C4(1)M 1.5 6 0.5 C5 HA1.5-10C5(1)M 2.2 6 0.5 C6 HA2.2-10C6(1)M 3.3 6 0.5 C7 HA3.3-10C7(1)M 4.7 6 1.0 C8 HA4.7-10C8(1)M 15 6 1.5 C9 HA15-10C9(1)M 10 VDC AT + 85 C 15 VDC AT + 85 C 0.10 10 0.5 C0 HA.10-15C0(1)M 0.22 6 0.5 C1 HA.22-15C1(1)M 0.33 6 0.5 C2 HA.33-15C2(1)M 0.47 6 0.5 C3 HA.47-15C3(1)M 0.68 6 0.5 C4 HA.68-15C4(1)M 1.0 6 0.5 C5 HA1.0-15C5(1)M 1.5 6 0.5 C6 HA1.5-15C6(1)M 2.2 6 0.5 C7 HA2.2-15C7(1)M 3.3 6 1.0 C8 HA3.3-15C8(1)M 10 6 1.5 C9 HA10-15C9(1)M 20 VDC AT + 85 C 0.0068 10 0.5 C0 HA.0068-0C0(1)E 0.0068 10 0.5 C1 HA.0068-0C1(1)E 0.010 10 0.5 C0 HA.010-20C0(1)E 0.015 10 0.5 C0 HA.015-20C0(1)E 0.022 10 0.5 C0 HA.022-20C0(1)E 0.033 10 0.5 C0 HA.033-20C0(1)E 0.047 10 0.5 C0 HA.047-20C0(1)E 0.068 10 0.5 C0 HA.068-20C0(1)E 0.15 6 0.5 C1 HA.15-20C1(1)M 0.22 6 0.5 C2 HA.22-20C2(1)M 0.33 6 0.5 C3 HA.33-20C3(1)M 0.47 6 0.5 C4 HA.47-20C4(1)M 0.68 6 0.5 C5 HA.68-20C5(1)M Note * Part number definition: (1) Add A for axial, R for radial Revision: 05-Dec-07 Document Number: 43003 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX. DF (%) MAX. DCL AT + 25 C (A) CASE CODE PART NUMBER 20 VDC AT + 85 C 1.0 6 0.5 C6 HA1.0-20C6(1)M 1.5 6 0.5 C7 HA1.5-20C7(1)M 2.2 6 1.0 C8 HA2.2-20C8(1)M 4.7 6 1.5 C9 HA4.7-20C9(1)M 6.8 6 1.5 C9 HA6.8-20C9(1)M 35 VDC AT + 85 C 0.010 6 0.5 C1 HA.010-35C1(1)E 0.015 6 0.5 C1 HA.015-35C1(1)E 0.022 6 0.5 C1 HA.022-35C1(1)E 0.033 6 0.5 C1 HA.033-35C1(1)E 0.047 6 0.5 C1 HA.047-35C1(1)E 0.068 6 0.5 C1 HA.068-35C1(1)E 0.10 6 0.5 C1 HA.10-35C1(1)M 0.15 6 0.5 C2 HA.15-35C2(1)M 0.22 6 0.5 C3 HA.22-35C3(1)M 0.33 6 0.5 C4 HA.33-35C4(1)M 0.47 6 0.5 C5 HA.47-35C5(1)M 0.68 6 0.5 C6 HA.68-35C6(1)M 1.0 6 0.5 C7 HA1.0-35C7(1)M 1.5 6 0.5 C8 HA1.5-35C8(1)M 3.3 6 1.5 C9 HA3.3-35C9(1)M 50 VDC AT + 85 C 0.10 6 0.5 C2 HA.10-50C2(1)M 0.15 6 0.5 C3 HA.15-50C3(1)M 0.22 6 0.5 C4 HA.22-50C4(1)M 0.33 6 0.5 C5 HA.33-50C5(1)M 0.47 6 0.5 C6 HA.47-50C6(1)M 0.68 6 0.5 C7 HA.68-50C7(1)M 1.0 6 1.0 C8 HA1.0-50C8(1)M 1.5 6 1.5 C9 HA1.5-50C9(1)M 2.2 6 1.5 C9 HA2.2-50C9(1)M Note * Part number definition: (1) Add A for axial, R for radial Revision: 05-Dec-07 Document Number: 43003 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague STANDARD RATINGS - NON-POLAR CAPACITORS CAPACITANCE (F) MAX. DF (%) 1.0 2.2 4.7 10 33 10 10 10 10 10 0.68 1.5 3.3 6.8 22 10 10 10 10 10 0.47 1.0 2.2 4.7 15 8 8 8 8 8 0.33 0.68 1.5 3.3 10 6 6 6 6 6 0.22 0.47 1.0 2.2 6.8 6 6 6 6 6 0.15 0.33 0.68 1.5 4.7 6 6 6 6 6 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.22 0.47 1.0 2.2 3.3 6 6 6 6 6 6 6 6 6 6 6 6 MAX. DCL AT + 25 C (A) CASE CODE PART NUMBER N1 N2 N3 N4 N5 HA1.0-2N1(1)M HA2.2-2N2(1)M HA4.7-2N3(1)M HA10-2N4(1)M HA33-2N5(1)M N1 N2 N3 N4 N5 HA.68-3N1(1)M HA1.5-3N2(1)M HA3.3-3N3(1)M HA6.8-3N4(1)M HA22-3N5(1)M N1 N2 N3 N4 N5 HA.47-4N1(1)M HA1.0-4N2(1)M HA2.2-4N3(1)M HA4.7-4N4(1)M HA15-4N5(1)M N1 N2 N3 N4 N5 HA.33-6N1(1)M HA.68-6N2(1)M HA1.5-6N3(1)M HA3.3-6N4(1)M HA10-6N5(1)M N1 N2 N3 N4 N5 HA.22-10N1(1)M HA.47-10N2(1)M HA1.0-10N3(1)M HA2.2-10N4(1)M HA6.8-10N5(1)M N1 N2 N3 N4 N5 HA.15-15N1(1)M HA.33-15N2(1)M HA.68-15N3(1)M HA1.5-15N4(1)M HA4.7-15N5(1)M N1 N1 N1 N2 N2 N2 N1 N2 N3 N4 N5 N5 HA.010-20N1(1)M HA.015-20N1(1)M HA.022-20N1(1)M HA.033-20N2(1)M HA.047-20N2(1)M HA.068-20N2(1)M HA.10-20N1(1)M HA.22-20N2(1)M HA.47-20N3(1)M HA1.0-20N4(1)M H2.2-20N5(1)M HA3.3-20N5(1)M 2 VDC AT + 85 C 0.5 0.5 0.5 1.0 1.5 3 VDC AT + 85 C 0.5 0.5 0.5 1.0 1.5 4 VDC AT + 85 C 0.5 0.5 0.5 1.0 1.5 6 VDC AT + 85 C 0.5 0.5 0.5 1.0 1.5 10 VDC AT + 85 C 0.5 0.5 0.5 1.0 1.5 15 VDC AT + 85 C 0.5 0.5 0.5 1.0 1.5 20 VDC AT + 85 C 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.5 1.5 Note * Part number definition: (1) Add A for axial, R for radial Revision: 05-Dec-07 Document Number: 43003 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague STANDARD RATINGS - NON-POLAR CAPACITORS CAPACITANCE (F) MAX. DF (%) 0.10 6 0.15 0.22 MAX. DCL AT + 25 C (A) CASE CODE PART NUMBER 0.5 N2 HA.10-35N2(1)M 6 0.5 N2 HA.15-35N2(1)M 6 0.5 N3 HA.22-35N3(1)M 35 VDC AT + 85 C 0.33 6 0.5 N3 HA.33-35N3(1)M 0.47 6 1.0 N4 HA.47-35N4(1)M 0.68 6 1.0 N4 HA.68-35N4(1)M 1.0 6 1.5 N5 HA1.0-35N5(1)M 1.5 6 1.5 N5 HA1.5-35N5(1)M 50 VDC AT + 85 C 0.068 6 0.5 N3 HA.068-50N3(1)M 0.15 6 0.5 N3 HA.15-50N3(1)M 0.33 6 1.0 N4 HA.33-50N4(1)M 0.68 6 1.5 N5 HA.68-50N5(1)M Note * Part number definition: (1) Add A for axial, R for radial MARKING HA capacitors case sizes N4 and N5 are print marked: - Capacitance is in picofarads - 1st and 2nd digits are significant figures - 3rd digit indicates the number of zeros Capacitance Tolerance Is indicated by a dot on the side of the case. Black dot is omitted. Capacitance Color Digit In picofarads, indicated by 3 dots. Black 0 1st and 2nd dot give the significant digits. 3rd dot indicates the number of zeros. Color dot location is shown on the dimensional sketches. Black dot is omitted on black sleeve. Brown 1 Red 2 Orange 3 Yellow 4 Green 5 Color Tolerance Blue 6 Gold 5% Violet 7 Silver 10 % Grey 8 None 20 % White 9 None + 40 %/- 20 % The positive lead is indicated by a color dot of red epoxy on the unit. Revision: 05-Dec-07 All other case sizes have color dot marking: e.g. Yellow-Violet-Green = 4 700 000 pF = 4.7 F Document Number: 43003 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HA www.vishay.com Vishay Sprague PERFORMANCE AND RELIABILITY The capacitors are tested in accordance with MIL-PRF-49137, with specific requirements as follows: IMPEDANCE VS. FREQUENCY Temperature Stability: When tested per MIL-PRF-49137/6, capacitance shall be within 15 % at - 55 C and 85 C, and 10 % at 25 C after exposure to temperature extremes. DF shall be within 200 % of initial limit at - 55 C, 150 % of initial limit at 85 C, and meet the initial at 25 C. DCL shall be within 10 x initial limit at 85 C, and meet the initial limit at 25 C. Life: (per Method 108 of MIL-STD-202) after 1000 h at 85 C and rated voltage; capacitance shall be within 10 % of initial limit, DF within initial limits, and leakage within 200 % of initial limit. Surge Voltage: (per MIL-PRF-49317) After 1000 cycles at 85 C and 1.3 x VDC; capacitance shall be within 10 % of initial limit, DF and leakage within initial limits. Resistance to Soldering Heat: (per Method 210 0f MIL-STD-202, Condition B) After immersion in 260 C molten solder to within a 1/4" of the body of the unit, there shall be no evidence of mechanical or electrical degradation. 5K (MFD - VDC) 2K 1K 0. 04 7 F -2 0. 0 0 0. 4 V 04 7 7 F F - 3 20 V 5 V 0. 0.0 047 47 F F - 5 -3 0V 5V 4.7 4.7 F F - 1 -2 0V 0V 500 200 IMPEDANCE Moisture Resistance: (per Method 106 of MIL-STD-202) After 10 cycles of 24 h at 25 C to 65 C and 80 % to 98 % RH; capacitance shall be within 15 % of initial value, DF within 1.5 x initial limit and leakage within 3 x initial limit. 10K 100 50 20 10 5.0 2.0 4.7 F 1.0 -2 0V 0.5 0.2 0.1 100 500 1 Hz 2 kHz 5 10 20 50 100 FREQUENCY 500 1 kHz 2 5 10 MHz Solderability: (per Method 208 of MIL-STD-202) After dipping leads in 235 C molten solder to within 0.125" of the body of the unit, the solder shall cover 95 % of the lead surface. CAPACITANCE VS. TEMPERATURE CHANGE IN CAPACITANCE % + 10 (MFD - VDC) +5 SP E FI CI CA N TIO F- V 10 00 1 0 0 10 F 0 -1 -5 SP - 10 - 40 E FI CI - 10 V IC TYP AL 1 CA TI 0 H -2 V ON LEAKAGE CURRENT VS. TEMPERATURE 1.0 (MFD - VDC) D.C. LEAKAGE CURRENT (A) Terminal Strength: (per Method 211 of MIL-STD-202) After the following test there shall be no loosening of the terminals or permanent damage to the terminals. Test Condition A: (Pull Test) 0.010" leads withstand 1 pound, 0.016" leads 2 pounds and 0.007" leads 1/2 pound. Test Condition C: (Bend Test) All leads shall withstand 3 to 90 bends with a 1/2 pound applied force. 1 F - 20 V 100 F - 10 V 0.1 0.01 - 40 - 10 0 + 20 + 85 TEMPERATURE C + 25 + 85 + 100 TEMPERATURE C Revision: 05-Dec-07 Document Number: 43003 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000