LM741/E/I SINGLE OPERATIONAL AMPLIFIER
SINGLE OPERATIONAL AMPLIFIERS 8 DIP
The LM741 series are general purpose operational amplifiers which
feature improved performance over industry standards like the LM709.
It is intended for a wide range of analog applications.
The high gain and wide range of operating voltage provide superior
performance in integrator, summing amplifier, and general feedback
applications.
8 SOP
FEATURES
• Short circuit protection
• Excellent temperature stability
• Internal frequency compensation
• High Input voltage range
• Null of offset
BLOCK DIAGRAM ORDERING INFORMATION
SCHEMATIC DIAGRAM
Device Package Operating Temperature
LM741N
LM741EN8 DIP
LM741M
LM741EM 8 SOP
LM741IN
LM741EIN8 DIP
LM741IM
LM741EIM 8 SOP
0 ~ + 70
°
C
-40 ~ +85
°
C
1999 Fairchild Semiconductor Corporation
Rev. B
LM741/E/I SINGLE OPERATIONAL AMPLIFIER
ABSOLUTE MAXIMUM RATINGS (TA=25 °°C)
ELECTRICAL CHARACTERISTICS
(VCC = 15V, VEE = - 15V. TA = 25 °C, unless otherwise specified)
Characteristic Symbol LM741 LM741E LM741I Unit
Supply Voltage
Differential Input Voltage
Input Voltage
Output Short Circuit Duration
Power Dissipation
Operating Temperature Range
Storage Temperature Range
VCC
VI(DIFF)
VI
PD
TOPR
TSTG
±18
30
±15
Indefinite
500
0 ~ + 70
-65 ~ + 150
±22
30
±15
Indefinite
500
0 ~ + 70
-65 ~ + 150
±18
30
±15
Indefinite
500
-40 ~ + 85
-65 ~ + 150
V
V
V
mW
°C
°C
LM741E LM741/LM741I
Min Typ Max Min Typ Max
RS≤10KΩ2.0 6.0
RS≤50Ω0.8 3.0
Input Offset Voltage
Adjustment Range VIO(R) VCC = ±20V ±10 ±15 mV
Input Offset Current IIO 3.0 30 20 200 nA
Input Bias Current IBIAS 30 80 80 500 nA
Input Resistance RIVCC =±20V 1.0 6.0 0.3 2.0 MΩ
Input Voltage Range VI(R) ±12 ±13 ±12 ±13 V
VCC =±20V,
VO(P.P) =±15V 50
VCC =±15V,
VO(P.P) =±10V 20 200
Output Short Circuit Current ISC 10 25 35 25 mA
RL≥10KΩ±16
RL≥10KΩ±15
RL≥10KΩ±12 ±14
RL≥10KΩ±10 ±13
RS≤10KΩ, VCM = ±12V 70 90
RS≤50KΩ, VCM = ±12V 80 95
VCC = ±15V to VCC = ±15V
RS≤50Ω86 96
VCC = ±15V to VCC = ±15V
RS≤10KΩ77 96
VCC =
±
20V
VCC =
±
15V
Large Signal Voltage Gain GV RL≥2KΩ
Output Voltage Swing
V
O(P.P)
Common Mode Rejection Ratio
CMRR
Power Supply Rejection Ratio PSRR
Input Offset Voltage VIO
Characteristic Symbol Test Conditions Unit
mV
V/mV
V
dB
dB
LM741/E/I SINGLE OPERATIONAL AMPLIFIER
ELECTRICAL CHARACTERISTICS (Continued)
ELECTRICAL CHARACTERISTICS
( -40 °C ≤TA≤85 °C for the KA741I °C ≤TA≤70 °C for the LM741 and LM741E. VCC = ±15V, unless otherwise specified)
LM741E LM741/LM741I
Min Typ Max Min Typ Max
Transient Rise Time tR0.25 0.8 0.3 µs
Response Overshoot OS 6.0 20 10 %
Bandwidth BW 0.43 1.5 MHz
Slew Rate SR Unity Gain 0.3 0.7 0.5 V/µs
Supply Current ICC RL= ∞Ω1.5 2.8 mA
VCC = ±20V 80 150
VCC = ±15V 50 85 mW
LM741E LM741/LM741I
Min Typ Max Min Typ Max
RS≤50Ω4.0
RS≤10KΩ7.5
Input Offset Voltage Drift ∆VIO/∆T15 µV/ °C
Input Offset Current IIO 70 300 nA
Input Offset Current Drift ∆IIO/∆T0.5 nA/ °C
Input Bias Current IBIAS 0.21 0.8 µA
Input Resistance RIVCC = ±20V 0.5 MΩ
Input Voltage Range VI(R) ±12 ±13 ±12 ±13 V
RS≥10KΩ±16
RS≥2KΩ±15
RS≥10KΩ±12 ±14
RS≥2KΩ±10 ±13
Output Short Circuit Current ISC 10 40 10 40 mA
RS≤10KΩ, VCM = ±12V 70 90
RS≤50KΩ, VCM = ±12V 80 95
VCC = ±20V RS≤50Ω86 96
to ±5V RS≤10KΩ77 96 dB
VCC = ±20V,
VO(P-P) = ±15V 32
VCC = ±15V,
VO(P.P) = ±10V 15
VCC = ±15V,
VO(P-P) = ±2V 10
Characteristic Symbol Test Conditions
Power Consumption PC
Unit
Characteristic Symbol Test Conditions
Input Offset Voltage VIO
VCC =±20V
VCC =±15V
Output Voltage Swing VO(P.P)
Common Mode Rejection Ratio CMRR
Power Supply Rejection Ratio PSRR
Large Signal Voltage Gain GVRS≥2KΩ
Unit
mV
V
dB
V/mV
LM741/E/I SINGLE OPERATIONAL AMPLIFIER
TYPICAL PERFORMANCE CHARACTERISTICS
LM741/E/I SINGLE OPERATIONAL AMPLIFIER
LM741/E/I SINGLE OPERATIONAL AMPLIFIER
TRADEMARKS
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.