STANDARD PLCC SOCKETS
For Through Board Mount
www.mill-max.com 516-922-6000
92
Series 940
Ordering Information
•Note: Not end stackable.
•Accepts JEDEC PLCCs
MS-016 & MS-018
leaded plastic substrates.
•Insulator material is
glass reinforced PPS.
•Standoffs provide clear-
ance for heat dissipation
and cleaning.
• Internal standoffs insure
proper positioning of chip
carrier in socket.
•Contacts are plated with
3,81µm tin.
• Pre-lubricated available.
20 15,57 5,08 10,16 38 940-44-020-24-00X000
28 18,11 7,62 12,7 33 940-44-028-24-00X000
32* 20,7/18,1 10,2/7,62 15,2/12,7 29 *RECTANGULAR 940-44-032-24-00X000
44 23,19 12,7 17,8 26 940-44-044-24-00X000
52 25,73 15,24 20,32 23 940-44-052-24-00X000
68 30,81 20,32 25,4 19 940-44-068-24-00X000
84 35,89 25,4 30,48 16 940-44-084-24-00X000
100 40,72 30,48 35,56 25 940-44-100-24-00X000
X = 0 Not Lubricated
X = 1 Pre-Lubricated
No. of
Contacts
A B C
Application of Pre-Lubricated Sockets:
Intended as a general-pupose lubricant for tin/lead
connectors, Nyetact 502M-20-UV is a solvent disper-
sion of a water-resistant, non-melting grease based on
a plastic-compatible, synthetic hydrocarbon oil. Useful
temperature range: -40° to 120°C. The active lubricant
is present at 20% (by weight) in mineral spirits.
The pre-lubrication increases the reliability of standard
sockets by preventing fretting corrosion.
Pre-lubricated sockets can be used for any long life
applications having a tin-tin interface.
There is no degradation of lubrication during soldering
or final wash. Contact the factory for other pre-lubricat-
ed products.
See page 96 for lubrication specifications.
Quantity
per Tube
Plating Code
44 = 3,81 µm Sn
8,26
3,3
2,54
0,46 0,25
2,54
0,89
1,57
2,54
