© Semiconductor Components Industries, LLC, 2006
November, 2006 Rev. 7
1Publication Order Number:
MC10E107/D
MC10E107, MC100E107
5VECL Quint 2-Input
XOR/XNOR Gate
Description
The MC10E/100E107 is a quint 2-input XOR/XNOR gate. The
function output F is the OR of all five XOR outputs, while F is the
NOR. The Q outputs need not be terminated if only the F outputs are
to be used.
The 100 Series contains temperature compensation.
Features
600 ps Maximum Propagation Delay
OR/NOR Function Outputs
PECL Mode Operating Range:
VCC = 4.2 V to 5.7 V with VEE = 0 V
NECL Mode Operating Range:
VCC = 0 V with VEE = 4.2 V to 5.7 V
Internal Input 50 kW Pulldown Resistors
ESD Protection: Human Body Model; > 2 kV,
Machine Model; > 200 V
Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test
Moisture Sensitivity Level:
Pb = 1
PbFree = 3
For Additional Information, see Application Note AND8003/D
Flammability Rating: UL 94 V0 @ 0.125 in,
Oxygen Index: 28 to 34
Transistor Count = 140 devices
PbFree Packages are Available*
*For additional information on our PbFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
MARKING DIAGRAM*
xxx = 10 or 100
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G= PbFree Package
PLCC28
FN SUFFIX
CASE 776
MCxxxE107G
AWLYYWW
1
http://onsemi.com
*For additional marking information, refer to
Application Note AND8002/D.
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
ORDERING INFORMATION
MC10E107, MC100E107
http://onsemi.com
2
FFVCCO
NCD4a
D4b
D3a
D3b
D2a
D2b
VEE
D1a
D1b
D0a
26
27
28
2
3
4
25 24 23 22 21 20 19
18
17
16
15
14
13
12
11567 8910
Q4
Q4
VCC
Q3
Q3
Q2
Q2
D0b VCCO Q0Q0Q1Q1VCCO
1
All VCC and VCCO pins are tied together on the die.
Figure 1. 28Lead Pinout (Top View)
Warning: All VCC, VCCO, and VEE pins must be externally
connected to Power Supply to guarantee proper operation.
D0a
D0b
D1a
D1b
D2a
D2b
D3a
D3b
D4a
D4b
F
F
Q0
Q0
Q1
Q1
Q2
Q2
Q3
Q3
Q4
Q4
Figure 2. Logic Diagram
Pinout: 28-Lead PLCC
(Top View)
Table 1. PIN DESCRIPTION
PIN FUNCTION
D0a D4b ECL Data Inputs
Q0Q4ECL XOR Outputs
Q0Q4ECL XNOR Outputs
FECL OR Output
FECL NOR Output
VCC, VCCO Positive Supply
VEE Negative Supply
NC No Connect
Table 2. FUNCTION OUTPUTS
F = (D0a D0b) + (D1a D1b) (D2a D2b) +
(D3a D3b) + (D4a D4b)
MC10E107, MC100E107
http://onsemi.com
3
Table 3. MAXIMUM RATINGS
Symbol Parameter Condition 1 Condition 2 Rating Unit
VCC PECL Mode Power Supply VEE = 0 V 8 V
VEE NECL Mode Power Supply VCC = 0 V 6 V
VIPECL Mode Input Voltage
NECL Mode Input Voltage
VEE = 0 V
VCC = 0 V
VI v VCC
VI w VEE
6
6
V
V
Iout Output Current Continuous
Surge
50
100
mA
mA
TAOperating Temperature Range 0 to +85 °C
Tstg Storage Temperature Range 65 to +150 °C
qJA Thermal Resistance (JunctiontoAmbient) 0 lfpm
500 lfpm
PLCC28
PLCC28
63.5
43.5
°C/W
°C/W
qJC Thermal Resistance (JunctiontoCase) Standard Board PLCC28 22 to 26 °C/W
Tsol Wave Solder Pb
PbFree
265
265
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 4. 10E SERIES PECL DC CHARACTERISTICS VCC = 5.0 V, VEE = 0.0 V (Note 1)
Symbol Characteristic
40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
IEE Power Supply Current 42 50 42 50 42 50 mA
VOH Output HIGH Voltage (Note 2) 3980 4070 4160 4020 4105 4190 4090 4185 4280 mV
VOL Output LOW Voltage (Note 2) 3050 3210 3370 3050 3210 3370 3050 3227 3405 mV
VIH Input HIGH Voltage 3830 3995 4160 3870 4030 4190 3940 4110 4280 mV
VIL Input LOW Voltage 3050 3285 3520 3050 3285 3520 3050 3302 3555 mV
IIH Input HIGH Current 200 200 200 mA
IIL Input LOW Current 0.5 0.3 0.5 0.25 0.3 0.2 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input and output parameters vary 1:1 with VCC. VEE can vary 0.46 V / +0.06 V.
2. Outputs are terminated through a 50 W resistor to VCC 2.0 V.
Table 5. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = 5.0 V (Note 3)
Symbol Characteristic
40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
IEE Power Supply Current 42 50 42 50 42 50 mA
VOH Output HIGH Voltage (Note 4) 1020 930 840 980 895 810 910 815 720 mV
VOL Output LOW Voltage (Note 4) 1950 1790 1630 1950 1790 1630 1950 1773 1595 mV
VIH Input HIGH Voltage 1170 1005 840 1130 970 810 1060 890 720 mV
VIL Input LOW Voltage 1950 1715 1480 1950 1715 1480 1950 1698 1445 mV
IIH Input HIGH Current 200 200 200 mA
IIL Input LOW Current 0.5 0.3 0.5 0.065 0.3 0.2 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Input and output parameters vary 1:1 with VCC. VEE can vary 0.46 V / +0.06 V.
4. Outputs are terminated through a 50 W resistor to VCC 2.0 V.
MC10E107, MC100E107
http://onsemi.com
4
Table 6. 100E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V (Note 5)
Symbol Characteristic
40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
IEE Power Supply Current 42 50 42 50 48 58 mA
VOH Output HIGH Voltage (Note 6) 3975 4050 4120 3975 4050 4120 3975 4050 4120 mV
VOL Output LOW Voltage (Note 6) 3190 3295 3380 3190 3255 3380 3190 3260 3380 mV
VIH Input HIGH Voltage 3835 3975 4120 3835 3975 4120 3835 3975 4120 mV
VIL Input LOW Voltage 3190 3355 3525 3190 3355 3525 3190 3355 3525 mV
IIH Input HIGH Current 200 200 200 mA
IIL Input LOW Current 0.5 0.3 0.5 0.25 0.5 0.2 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with VCC. VEE can vary 0.46 V / +0.8 V.
6. Outputs are terminated through a 50 W resistor to VCC 2.0 V.
Table 7. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0 V; VEE = 5.0 V (Note 7)
Symbol Characteristic
40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
IEE Power Supply Current 42 50 42 50 48 58 mA
VOH Output HIGH Voltage (Note 8) 1025 950 880 1025 950 880 1025 950 880 mV
VOL Output LOW Voltage (Note 8) 1810 1705 1620 1810 1745 1620 1810 1740 1620 mV
VIH Input HIGH Voltage 1165 1025 880 1165 1025 880 1165 1025 880 mV
VIL Input LOW Voltage 1810 1645 1475 1810 1645 1475 1810 1645 1475 mV
IIH Input HIGH Current 200 200 200 mA
IIL Input LOW Current 0.5 0.3 0.5 0.25 0.5 0.2 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Input and output parameters vary 1:1 with VCC. VEE can vary 0.46 V / +0.8 V.
8. Outputs are terminated through a 50 W resistor to VCC 2.0 V.
MC10E107, MC100E107
http://onsemi.com
5
Table 8. AC CHARACTERISTICS VCCx= 5.0 V; VEE = 0.0 V or VCCx = 0.0 V; VEE = 5.0 V (Note 9)
Symbol Characteristic
40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
fMAX Maximum Toggle Frequency 700 700 700 MHz
tPLH
tPHL
Propagation Delay to Output
D to Q
D to F
250
500
410
725
600
1000
250
500
410
725
600
1000
250
500
410
725
600
1000
ps
tSKEW Within-Device Skew (Note 10)
D to Q 75 75 75
ps
tJITTER Random Clock Jitter (RMS) < 1 < 1 < 1 ps
tr
tf
Rise/Fall Time
(20 - 80%) Q
F
275
300
450
475
700
700
275
300
450
475
700
700
275
300
450
475
700
700
ps
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
9. 10 Series: VEE can vary 0.46 V / +0.06 V.
100 Series: VEE can vary 0.46 V / +0.8 V.
10.Within-device skew is defined as identical transitions on similar paths through a device.
Figure 3. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D Termination of ECL Logic Devices.)
Driver
Device
Receiver
Device
QD
Q D
Zo = 50 W
Zo = 50 W
50 W50 W
VTT
VTT = VCC 2.0 V
MC10E107, MC100E107
http://onsemi.com
6
ORDERING INFORMATION
Device Package Shipping
MC10E107FN PLCC28 37 Units / Rail
MC10E107FNG PLCC28
(PbFree)
37 Units / Rail
MC10E107FNR2 PLCC28 500 / Tape & Reel
MC10E107FNR2G PLCC28
(PbFree)
500 / Tape & Reel
MC100E107FN PLCC28 37 Units / Rail
MC100E107FNG PLCC28
(PbFree)
37 Units / Rail
MC100E107FNR2 PLCC28 500 / Tape & Reel
MC100E107FNR2G PLCC28
(PbFree)
500 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D ECL Clock Distribution Techniques
AN1406/D Designing with PECL (ECL at +5.0 V)
AN1503/D ECLinPSt I/O SPiCE Modeling Kit
AN1504/D Metastability and the ECLinPS Family
AN1568/D Interfacing Between LVDS and ECL
AN1672/D The ECL Translator Guide
AND8001/D Odd Number Counters Design
AND8002/D Marking and Date Codes
AND8020/D Termination of ECL Logic Devices
AND8066/D Interfacing with ECLinPS
AND8090/D AC Characteristics of ECL Devices
MC10E107, MC100E107
http://onsemi.com
7
PACKAGE DIMENSIONS
PLCC28
FN SUFFIX
PLASTIC PLCC PACKAGE
CASE 77602
ISSUE E
N
M
L
V
WD
D
Y BRK
28 1
VIEW S
S
L−M
S
0.010 (0.250) N S
T
S
L−M
M
0.007 (0.180) N S
T
0.004 (0.100)
G1
GJ
C
Z
R
E
A
SEATING
PLANE
S
L−M
M
0.007 (0.180) N S
T
T
B
S
L−M
S
0.010 (0.250) N S
T
S
L−M
M
0.007 (0.180) N S
T
U
S
L−M
M
0.007 (0.180) N S
T
Z
G1X
VIEW DD
S
L−M
M
0.007 (0.180) N S
T
K1
VIEW S
H
K
FS
L−M
M
0.007 (0.180) N S
T
NOTES:
1. DATUMS −L−, −M−, AND −N− DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS
PLASTIC BODY AT MOLD PARTING LINE.
2. DIMENSION G1, TRUE POSITION TO BE
MEASURED AT DATUM −T−, SEATING PLANE.
3. DIMENSIONS R AND U DO NOT INCLUDE
MOLD FLASH. ALLOWABLE MOLD FLASH IS
0.010 (0.250) PER SIDE.
4. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN
THE PACKAGE BOTTOM BY UP TO 0.012
(0.300). DIMENSIONS R AND U ARE
DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR
BURRS, GATE BURRS AND INTERLEAD
FLASH, BUT INCLUDING ANY MISMATCH
BETWEEN THE TOP AND BOTTOM OF THE
PLASTIC BODY.
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037
(0.940). THE DAMBAR INTRUSION(S) SHALL
NOT CAUSE THE H DIMENSION TO BE
SMALLER THAN 0.025 (0.635).
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.485 0.495 12.32 12.57
B0.485 0.495 12.32 12.57
C0.165 0.180 4.20 4.57
E0.090 0.110 2.29 2.79
F0.013 0.019 0.33 0.48
G0.050 BSC 1.27 BSC
H0.026 0.032 0.66 0.81
J0.020 −−− 0.51 −−−
K0.025 −−− 0.64 −−−
R0.450 0.456 11.43 11.58
U0.450 0.456 11.43 11.58
V0.042 0.048 1.07 1.21
W0.042 0.048 1.07 1.21
X0.042 0.056 1.07 1.42
Y−−− 0.020 −−− 0.50
Z2 10 2 10
G1 0.410 0.430 10.42 10.92
K1 0.040 −−− 1.02 −−−
__ __
MC10E107, MC100E107
http://onsemi.com
8
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
MC10E107/D
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative