Advanced Monolithic Systems AMSREF-02 +5V PRECISION VOLTAGE REFERENCE FEATURES APPLICATIONS * 5 Volt Output .................................... 0.3% Max * Temperature Voltage Output .................... 2.1mV/C * Adjustment Range ................................. 3% Min * Excellent Temperature Stability............... 8.5ppm/C * Low Noise ......................................... 15 VP-P Max * Low Supply Current ............................ 650 A Typ * Wide Input Voltage Range ...................... 7V to 40V * High Load-Driving Capability * No External Components * Short -Circuit Proof * A/D, D/A Converters * Portable Instrumentation * Digital Voltmeters * Current Sources GENERAL DESCRIPTION The AMSREF-02 is a precision voltage reference, which provides a stable +5V, which can be adjusted over a 6% range with minimal effect on temperature stability. Careful design of this device improved its bandgap and as a result excellent temperature stability is achieved. The operating supply range is 7V to 40V with a typical current drain of 650A. Low cost, low noise and low power makes the AMSREF-02 an excellent choice whenever a stable voltage reference is required. Applications include D/A and A/D converters, portable instrumentation and digital voltmeters. The versatility of AMSREF-02 is enhanced by its use as a monolithic temperature transducer. The AMSREF-02 is operational in the full industrial temperature range of -40C to 85C and is available in the 8 lead SOIC and plastic dip (PDIP) packages. ORDERING INFORMATION: TOL. PACKAGE TYPE 8 LEAD SOIC 15mV AMSREF-02ES 25mV AMSREF-02HS 50mV AMSREF-02CS 8 LEAD PDIP AMSREF-02EP AMSREF-02HP AMSREF-02CP OPERATING TEMPERATURE RANGE -40 to 85 C -40 to 85 C -40 to 85 C PIN CONNECTIONS 8L SOIC/ 8L PDIP N/C 1 8 N/C VIN 7 N/C 2 TEMP 3 6 VOUT GND 4 5 TRIM Top View Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMSREF-02 ABSOLUTE MAXIMUM RATINGS (Note1) Input Voltage Output Short Circuit Duration (to Ground or VIN) Operating Temperature Range Junction Temperature 40V Storage temperature Soldering information (60 sec) Thermal Resistance 8 L SOIC 8 L PDIP Indefinite -40C to 85C -65C to +150C -65C to +125C 300C 160C/W 110C/W ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN =+15V and TA = +25C unless otherwise specified. Parameter Conditions AMSREF-02E AMSREF-02 H Min Typ Max Min Typ Max AMSREF-02 C Min Typ Max Output Voltage IL = 0 4.985 5.000 4.950 5.000 Output Adjustment Range RP =10k 3.0 6.0 2.7 6.0 Output Voltage Noise 0.1Hz to 10Hz 10 15 10 15 12 18 VP-P Line Regulation (Note 5) VIN = 8V to 33V 0.006 0.010 0.006 0.010 0.009 0.015 %V Load Regulation (Note 5) IL = 0 to 10 mA, 0.005 0.010 0.006 0.010 0.006 0.015 % mA Turn-on Setting Time TO 0.1% of final value Quiescent Supply Current No Load Load Current 5.015 4.975 5.000 3.0 6.0 5 0.65 5.025 5 1.0 0.65 Units 5.050 V % s 5 1.0 0.65 1.0 mA 10 21 10 21 8 21 mA -5 -10 -5 -10 -5 -10 mA Sink Current (Note 6) Short Circuit Current VO = 0 30 30 30 mA Temperature Voltage Output (Note 7) 630 630 630 mV ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN= 15, IL = 0mA, and -40C TA +85C unless otherwise specified. Parameter Conditions AMSREF-02E AMSREF-02 H AMSREF-02 C Min Typ Max Min Typ Max Min Typ Max Units Output Voltage Change with Temp. (Notes 2,3) Output Voltage Temp. Coefficient Change in VO Temp. Coefficient with Output Adjustment (Note 4) Line Regulation (Note 5) VIN = 8V to 33V 0.007 0.012 0.007 0.012 0.011 0.018 %V Load Regulation (Note 5) Temperature Voltage Output Temperature Coefficient IL = 0 to 8 mA, 0.006 0.010 0.007 0.012 0.008 0.018 % mA RL = 10k (Note 7) 0.02 0.06 0.07 0.17 0.14 0.45 % 3 8.5 10 25 20 65 ppm/C 0.7 2.1 0.7 2.1 0.7 2.1 ppm/C mV/C Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMSREF-02 Note 2: The output voltage change with temperature (VOT) is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a percentage of 5V: VOT = [(VMAX -VMIN)/ 5V] x 100 Note 3: VOT specification applies trimmed to +5.000V or untrimmed Note 4: TCVO is defined as VOT divided by the temperature range: TCVO (-40C to +85C)= [VOT (-40C to +85C)] / 125C Note 5: Line and Load Regulation specifications include the effect of self heating. Note 6: During sink current test, the device meets the output voltage specified. Note 7: Limit current in or out of pin 3 to 50nA and capacitance on pin 3 to 30pF. TYPICAL PERFORMANCE CHARACTERISTICS Normalized Load Regulation ( IL = 10mA) vs Temperature 30 25 500mW MAXIMUM DISSIPATION 20 15 10 5 TA = 25 C 0 0 15 20 25 INPUT VOLTAGE (V) 30 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 MAXIMUM LOAD CURRENT (mA) LINE REGULATION (%/V) 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE ( C) Quiescent Current vs Temperature Maximum Load Current vs Temperature 0.03 0.02 0.01 TA = 25 C 10 15 20 25 INPUT VOLTAGE (V) VIN = 15V 0.6 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE ( C) Line Regulation vs Supply Voltage 5 1.4 LINE REG (T)/ LINE REG (25 C) SHORT CIRCUIT PROTECTION Normalized Line Regulation vs Temperature 30 Advanced Monolithic Systems, Inc. 30 1.3 25 20 15 10 5 VIN = 15V 0 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE ( C) QUIESCENT CURRENT (mA) 35 LOAD REG (T)/ LOAD REG (25 C) MAXIMUM LOAD CURRENT (mA) Maximum Load Current vs Input Voltage 1.2 1.1 1.0 0.9 0.8 VIN = 15V 0.7 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE ( C) 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMSREF-02 OUTPUT ADJUSTMENT +15V The REF-02 trim terminal can be used to adjust the 5 Volt output voltage 300mV. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 5V. The system can also be set exactly 5.000V, or to 5.12V for binary applications. Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change is approximately 0.7ppm/C for 100mV of output adjustment. 2 VIN VO 6 OUTPUT REF-02 3 TEMP TRIM 5 10k GND 4 TYPICAL APPLICATIONS 5V Reference +15V 2 VIN VO 6 +5V REF-02 3 0.1 F TRIM 10k 5 10k GND 4 +15V 5k OP-02 + -5V -15V Supply Bypassing For best results, it is recommended that the power supply pin is bypassed with a 0.1F disk ceramic capacitor. Current Source Current Sink +15V IOUT VOLTAGE COMPLIANCE: -25V TO +8V 2 VIN VO VIN 6 TRIM VO IOUT= (5.0V/R)+1mA REF-02 3 VOLTAGE COMPLIANCE: -8V TO +25V 2 5 R GND 4 IOUT Advanced Monolithic Systems, Inc. 6 IOUT= (5.0V/R)+1mA REF-02 3 TRIM 5 R GND 4 -15V 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMSREF-02 TYPICAL APPLICATIONS (Continued) Precision Temperature Transducer with Remote Sensor +15V 2 VIN VO VREF 6 RC RA REF-02 TRIM 5 0.1 F TEMP 3 GND 2 RP 50k - RB1 RS 1.5k, 5% 7 OP-02 3 + 6 VOUT 4 4 * RBP * UP TO 10 " OF SHIELDED 4-CONDUCTOR CABLE -15V Typical Temperature Voltage Output vs Temperature RESISTOR VALUES 880 10mV/C 100mV/C -40C to +85C -40C to +85C -0.40V to +0.85V -0.40V to +0.85V 0V @ 0C 0V @ 0C RA ( 1% resistor) 9.09k 15k RB1( 1% resistor) 1.5k 1.82k RBP (Potentiometer) 200k 500k RC ( 1% resistor) 5.11k 84.5k TEMPERATURE RANGE OUTPUT VOLTAGE RANGE ZERO SCALE TEMP. VOLTAGE OUTPUT (mV) TCVOUT SLOPE(S) 830 780 730 680 630 580 530 480 430 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE ( C) Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMSREF-02 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted. 8 LEAD SOIC PLASTIC PACKAGE (S) 0.189-0.197* (4.801-5.004) 8 7 6 5 0.228-0.244 (5.791-6.197) 0.150-0.157** (3.810-3.988) 1 2 3 4 0.010-0.020 x 45 (0.254-0.508) 0.053-0.069 (1.346-1.752) 0.004-0.010 (0.101-0.254) 0.014-0.019 (0.355-0.483) 0.008-0.010 (0.203-0.254) 0.050 (1.270) TYP 0-8 TYP 0.016-0.050 (0.406-1.270) S (SO-8 ) AMS DRW# 042293 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE 8 LEAD PLASTIC DIP PACKAGE (P) 0.400* (10.160) MAX 8 7 6 5 1 2 3 4 0.2550.015* (6.4770.381) 0.045-0.065 (1.143-1.651) 0.300-0.325 (7.620-8.255) 0.1300.005 (3.3020.127) 0.065 (1.651) TYP 0.005 (0.127) MIN 0.1000.010 (2.5400.254) 0.125 (3.175) MIN 0.009-0.015 (0.229-0.381) 0.015 (0.380) MIN 0.0180.003 (0.4570.076) 0.325 +0.025 -0.015 (8.255 +0.635 -0.381 ) P (8L PDIP ) AMS DRW# 042294 *DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTUSIONS. MOLD FLASH OR PROTUSIONS SHALL NOT EXCEED 0.010" (0.254mm) Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140