MM3Z2V4ST1 SERIES Zener Voltage Regulators 200 mW SOD-323 Surface Mount Tight Tolerance Portfolio This series of Zener diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200 mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand-held portables, and high density PC boards. http://onsemi.com 1 Cathode Specification Features: * * * * * 2.4 V to 33 V Steady State Power Rating of 200 mW Small Body Outline Dimensions: 0.067 x 0.049 (1.7 mm x 1.25 mm) Low Body Height: 0.035 (0.9 mm) Package Weight: 4.507 mg/unit ESD Rating of Class 3 (>16 kV) per Human Body Model Tight Tolerance VZ Pb-Free Packages are Available SOD-323 CASE 477 STYLE 1 XX = Specific Device Code M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. 260C for 10 Seconds LEADS: Plated with Pb-Sn or Sn only (Pb-Free) POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 MOUNTING POSITION: Any MAXIMUM RATINGS Rating Thermal Resistance from Junction-to-Ambient Junction and Storage Temperature Range Symbol PD XXMG G 1 Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: Total Device Dissipation FR-5 Board, (Note 1) @ TA = 25C Derate above 25C MARKING DIAGRAM 2 * Standard Zener Breakdown Voltage Range - * * 2 Anode ORDERING INFORMATION Device Package Shipping MM3ZxxxST1 SOD-323 3000/Tape & Reel MM3ZxxxST1G SOD-323 (Pb-Free) 3000/Tape & Reel MM3ZxxxST3 SOD-323 10,000/Tape & Reel MM3ZxxxST3G SOD-323 (Pb-Free) 10,000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Max Unit 200 1.5 mW mW/C DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. RqJA 635 C/W TJ, Tstg -65 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-4 Minimum Pad. (c) Semiconductor Components Industries, LLC, 2008 September, 2008 - Rev. 15 1 Publication Order Number: MM3Z2V4ST1/D MM3Z2V4ST1 SERIES ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA for all types) Parameter Symbol VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF QVZ C I IF VZ VR V IR VF IZT Maximum Temperature Coefficient of VZ Zener Voltage Regulator Max. Capacitance @VR = 0 and f = 1 MHz ELECTRICAL CHARACTERISTICS (VF = 0.9 Max @ IF = 10 mA for all types) ZZT IZ = IZT @ 10% Mod W Max mA V Min Max C pF Max @ VR = 0 f = 1 MHz Max IR @ VR dVZ/dt (mV/k) @ IZT1 = 5 mA Min Max ZZK IZ = 0.5 mA W Max 5.0 3.32 3.53 1000 95 5.0 1.0 -3.5 0 450 T7 5.0 3.89 4.16 1000 90 3.0 1.0 -3.5 -2.5 450 MM3Z4V3ST1, G T8 5.0 4.17 4.43 1000 90 3.0 1.0 -3.5 0 450 MM3Z4V7ST1, G T9 5.0 4.55 4.75 800 80 3.0 2.0 -3.5 0.2 260 MM3Z5V1ST1, G TA 5.0 4.98 5.2 500 60 2.0 2.0 -2.7 1.2 225 MM3Z5V6ST1, G TC 5.0 5.49 5.73 200 40 1.0 2.0 -2.0 2.5 200 MM3Z6V2ST1, G TE 5.0 6.06 6.33 100 10 3.0 4.0 0.4 3.7 185 MM3Z6V8ST1, G TF 5.0 6.65 6.93 160 15 2.0 4.0 1.2 4.5 155 MM3Z7V5ST1, G TG 5.0 7.28 7.6 160 15 1.0 5.0 2.5 5.3 140 MM3Z8V2ST1, G TH 5.0 8.02 8.36 160 15 0.7 5.0 3.2 6.2 135 MM3Z9V1ST1, G TK 5.0 8.85 9.23 160 15 0.5 6.0 3.8 7.0 130 MM3Z10VST1, G WB 5.0 9.80 10.20 160 15 0.5 6.0 4.5 8.0 130 MM3Z12VST1, G TN 5.0 11.74 12.24 80 25 0.1 8.0 6.0 10 130 MM3Z15VST1, G TP 5.0 14.34 14.98 80 40 0.1 11 8.8 12.7 130 MM3Z16VST1, G TU 5.0 15.85 16.51 80 40 0.05 11.2 10.4 14 105 MM3Z18VST1, G TW 5.0 17.56 18.35 80 45 0.05 12.6 12.4 16 100 MM3Z22VST1G WP 5.0 21.54 22.47 100 55 0.05 15.4 16.4 20 85 MM3Z27VST1G WQ 5.0 26.19 27.53 300 80 0.05 18.9 21.4 25.3 70 MM3Z33VST1G WR 5.0 32.15 33.79 300 80 0.05 23.2 27.4 33.4 70 Device Marking Test Current Izt mA MM3Z3V3ST1, G T5 MM3Z3V9ST1, G Device* Zener Voltage VZ *The "G'' suffix indicates Pb-Free package available. http://onsemi.com 2 MM3Z2V4ST1 SERIES TYPICAL CHARACTERISTICS 1000 TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) Z ZT , DYNAMIC IMPEDANCE ( ) 1000 100 100 IZ = 1 mA 10 5 mA 1.0 3.0 75C 1.0 10 150C 10 0.4 0.5 1.1 0 V BIAS 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 IR, LEAKAGE CURRENT ( A) 1000 TA = 25C 100 10 1.0 +150C 0.1 0.01 + 25C 0.001 -55C 0.0001 1.0 1.2 Figure 2. Typical Forward Voltage 1000 C, CAPACITANCE (pF) 0C 0.6 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) VZ, NOMINAL ZENER VOLTAGE Figure 1. Effect of Zener Voltage on Zener Impedance 25C 4.0 10 0.00001 VZ, NOMINAL ZENER VOLTAGE (V) 5.0 VZ, NOMINAL ZENER VOLTAGE (V) Figure 3. Typical Capacitance Figure 4. Typical Leakage Current 100 0 10 100 80 10 POWER DISSIPATION (%) I Z , ZENER CURRENT (mA) TA = 25C 1.0 0.1 0.01 0 2.0 4.0 6.0 VZ, ZENER VOLTAGE (V) 8.0 10 60 40 20 0 0 25 50 75 100 TEMPERATURE (C) 125 Figure 6. Steady State Power Derating Figure 5. Zener Voltage versus Zener Current (VZ Up to 9 V) http://onsemi.com 3 150 MM3Z2V4ST1 SERIES PACKAGE DIMENSIONS SOD-323 CASE 477-02 ISSUE G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 5. DIMENSION L IS MEASURED FROM END OF RADIUS. HE D b 1 2 E MILLIMETERS DIM MIN NOM MAX A 0.80 0.90 1.00 A1 0.00 0.05 0.10 A3 0.15 REF b 0.25 0.32 0.4 C 0.089 0.12 0.177 D 1.60 1.70 1.80 E 1.15 1.25 1.35 L 0.08 HE 2.30 2.50 2.70 A3 A C NOTE 3 L A1 NOTE 5 INCHES NOM MAX 0.035 0.040 0.002 0.004 0.006 REF 0.010 0.012 0.016 0.003 0.005 0.007 0.062 0.066 0.070 0.045 0.049 0.053 0.003 0.090 0.098 0.105 MIN 0.031 0.000 STYLE 1: PIN 1. CATHODE 2. ANODE SOLDERING FOOTPRINT* 0.63 0.025 0.83 0.033 1.60 0.063 2.85 0.112 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MM3Z2V4ST1/D