REVISION N DO NOT SCALE FROM THIS PRINT 125 [3.18] 2" MAX SWAY (EITHER DIRECTION) TABLE 1 (SEE NOTE 7) SPACE OPTION + POST HEIGHT | PACKAGING TUBE | PLUG .300 TO .725 [7.62 TO 18.42] PT1-24-16-29 |TP-O7 -726 TO .820 [18.44 TO 20.83] |PT124-01-67 |TP-13 .821 TO 1.080 [20.85 TO 27.43]]| PTHPWO01P TP26 | No OF POS x .200+.010 [5.08+.25] (No OF POS 1) x .200 [5.08] 100 [2.54] {| .250 [6.35] REF a SEE TABLE 2 VS: SINGLE VERTICAL @ + 100 [2.54] REF POST HEIGHT | rr [1.14] SQ REF [een [+.20], .000 MIN ger UNLESS OTHERWISE NOTED DIMENSIONS ARE IN INCHES TOLERANCES ARE: TITLE: ONE PLACE DECIMALS +.1[2.5] THREE PLACE DECIMALS +.003[.08] = TWO PLACE DECIMALS +.01[.25] FOUR PLACE DECIMALS +.0015[.038]| + 2 ANGLES .200 HIGH POWER STACKER, ASM a DWG NO: HPH-KXXXHX-H-XNX-HXX-XX-X SHEET 1 OF 1 TABLE 2 FORM BODY No OF POSITIONS -02 THRU 20 T/H FSW20200 VS HFSW20-200 LEAD STYLE >xxx+.008 [.20] SPACE OPTION (1.260 [32.00] MAX (SEE NOTE 12), .200 [5.08] MIN) ol | ! 04: T1S815xXX 05: T-1S815XX ONS PLATING SPECIFICATI <T: TIN (USE T-1S8-15-T) <TM: MATTE TIN (USE T-1$8-15-T) IN=PROCESS -VS NOTES: . HEIGHT VARIATION BETWEEN ANY TWO PINS SHALL BE .010 MAX. . MAXIMUM PIN ROTATION IN BODY: 2. HPWXXXXXXXXXXXXX XX T i POST HEIGHT XXX: SPECIFY POST HEIGHT 000 MIN (SEE NOTE 3) XXX: SPECIFY BOARD SPACING S: SINGLE (SEE TABLE 2) TAIL TO BE SHEARED TO .265 [6.73] MIN. A SECOND SHEAR STEP WILL BE NEEDED AFTER FORMING TO ACHIEVE THE TAIL TO TAIL DIM. MAXIMUM BURR ALLOWED: .004 [.10]. . MAXIMUM BURR ALLOWED: .0015 [.038]. . THROUGH HOLE (S) TO BE BULK PACKAGED. . SURFACE MOUNT (VS) TO BE PACKAGED AS FOLLOWS: POSITIONS 04 THRU 20 ARE TO BE PACKAGED IN TUBES: POSITIONS 02 & O3 ARE TO BE LAYERED PACKAGED. MIN PUSHOUT FORCE TO BE 3 LBS. . MAX CUT FLASH TO BE .020 [.51]. 0. REPRESENTS A CRITICAL DIMENSION. 1. ALL PARTS WITH PICK AND PLACE PAD TO USE PACKAGING TUBE PTHPWO01P AND TP26 PLUGS. POST + SPACE OF 1.300 [33.02] 1.350 [34.29] WILL NOT HAVE SHEARED TAILS. 1 2 3. 4, SPACE OPTION 5 .200 [5.08] + 6 POST HEIGHT ; | 8. 9 .265 [6.75] MIN 1 SEE NOTE 3) 1 12. 1.350 [34.29] MAX XXX+.008 [.20] SPACE OPTION (1.150 [29.21] MAX w/ .000 [.00] POST, -300 [.762] MIN) -200 rh 4 9044" 5.08] one PICK AND PLACE PAD VS ONLY; 3 POS MIN; OPTION .275 MAX POST HEIGHT VS VERTICAL SURFACE MOUNT PROPRIETARY NOTE THIS DOCUMENT CONTANS INFORMATION CONFIDENTIAL AND ETS PROPRIETARY TO INC, AND SHALL NOT BE UCED OR 1 OTHER DOCUMENTS OF DISCLOSED TO OR ANY PURPOSE, | .090+.010 [2.29+.25] [e008 [20] TASBTISCX SEE NOTES 3 & 4 SEE NOTES 3 & 5 05 1-8] S: SINGLE VS: VERTICAL SURFACE MOUNT PTHPW001P lo OF POS x .200 [5.08] REF (USE 2 TP26) POSITIONS 04 THRU 20 WITH OR WITHOUT P OPTION PACKAGING VIEW SEE TABLE 1 & NOTE 7 | t 8 8 -300 [7.62] REF i a 450 [11.43] REF od 5 -450 [11.43]) / 2} +.020 [12.90] PPP47 (-VS ONLY, 3 POS. MIN) (SEE NOTE 11) MATERIAL: BODY: VECTRA E130i COLOR: NATURAL UL 94VO TERMINAL: CDA7025 MAX BOW ALLOWED: .002 [.05] IN/IN PLOT SCALE: .375/ DIMSCALE: .300 Sam[(ec 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47151-1147 PHONE (812) 944-6733 P.O. BOX 1147 CODE 55. EXISPROD\ASSEMBLY\ 2009] HPW-ASM 322 MADE BY: BURRES 082198 HPH-XX-XX-XK-H-AXKAAK-HA-X