ASTMLP
ASTMLP
APPLICATIONS:
FEATURES:
Low power, Programmable SMD MEMS Oscillator
STANDARD SPECIFICATIONS:
Moisture Sensitivity Level (MSL) – 1
Pb
RoHS/RoHS II compliant
ESD Sensitive
• Industry Standard package sizes: 2.0 x 1.6 x 0.75mm, 2.5 x 2.0 x 0.75mm,
3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm
• Any frequency between 1MHz and 137MHz
• Supply Voltage options: 3.3V, 3.0V, 2.8V, 2.5V, 1.8V, 2.25V ~ 3.63V
• Low Current Consumption: 3.5mA typ. (@20MHz, 1.8V, no load);
4.9mA typ. (@125MHz, 1.8V, no load)
• Frequency Stability options: ±20ppm, ±25ppm, ±50ppm over -20 to +70°C
and -40 to +85°C
• Factory programmable drive strength for improved jitter, reduced EMI or
higher capacitive output load
• GPON, EPON
• Portable devices
• Consumer electronics
• Network switches, router, servers
• Ethernet, USB, SATA, SAS, Firewire
• Harsh environment (vibration, shock-prone and humid)
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Parameters Min Typ Max Unit Notes
Output Frequency Range (F) 1 110 MHz
115 137
Standard Frequencies See Section 1.1 for Standard Frequencies MHz
Frequency Stability (F
stab
)
-20 +20
ppm
Inclusive of initial tolerance at 25°C, 1
st
year aging at 25°C, and variations over
operating temperature, rated power
supply voltage and load (15pF±10%)
-25 +25
-50 +50
Operating Temperature Range (T
use
) -20 +70 °C Option “E”
-40 +85 Option “L”
Supply Voltage (V
dd
)
1.62 1.8 1.98
V
Option “18”
2.25 2.5 2.75 Option “25”
2.52 2.8 3.08 Option “28”
2.7 3.0 3.3 Option “30”
2.97 3.3 3.63 Option “33”
2.25 3.63 Option “Blank” (default)
Current Consumption ( I
dd
)
3.8 4.5
mA
No load, F=20MHz, V
dd
=2.8V,3.0V,3.3V
or 2.25V-3.63V
3.7 4.2 No load, F=20MHz, V
dd
=2.5V
3.5 4.1 No load, F=20MHz, V
dd
=1.8V
6.2 7.5 No load, F=125MHz,
V
d
d
=2.8V,3.0V,3.3V or 2.25V-3.63V
5.5 6.4 No load, F=125MHz, V
dd
=2.5V
4.9 5.6 No load, F=125MHz, V
dd
=1.8V
OE Disable Current (I
OD
)
4.2
mA
V
dd
=2.5V-3.3V, OE=GND, output is in
High-Z state
4.0 V
dd
=1.8V, OE=GND, output is in High-Z
state
Standby Current (I
std
)
2.6 4.3
µA
ST=GND, V
dd
=2.8V-3.3V, output is
weakly pulled down
1.4 2.5 ST=GND, V
dd
=2.5V, output is weakly
pulled down
0.6 1.3 ST=GND, V
dd
=1.8V, output is weakly
pulled down
Startup Time (T
start
) 5 ms Measured from the time V
dd
reaches its
rated minimum value
Enable/Disable Time (T
oe
)
130
ns
F=110MHz. For other frequencies,
T
oe
=100ns+3*cycles
122 F=137MHz. For other frequencies,
T
oe
=100ns+3*cycles
Resume Time ( T
resume
) 5 ms Measured from the time ST pin crosses
50% threshold
All Min and Max limits are specified over temperature and rated operating voltage with 15pF output load unless otherwise stated.
Typical values are at 25°C and nominal supply voltage.
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
(Continued)
Standard Frequency (MHz)
Standard Frequency (MHz)
3.57 4 4.096 6 7.3728 8.192 10 12 14
18.432 19.2 20 24 24.576 25 25.000625 26 27
28.6363 30 31.25 32.768 33 33.3 33.33 33.333 33.3333
33.3333 37.5 38 38.4 40 40.5 48 50 54
60 62.5 65 66 66.66 66.66 66.666 66.6666 66.66666
72 74.175824 74.176 74.25 75 77.76
Parameters Min Typ Max Unit Notes
Output Type LVCMOS
% 55 54 elcyC ytuD All V
dd
options
Rise/Fall Time ( T
r
/T
f
)
1 2
ns
V
dd
=2.5V, 2.8V, 3.0V or 3.3V, 20%-80%
1.3 2.5 V
dd
=1.8V, 20%-80%
2 V
dd
=2.25V-3.63V, 20%-80%
Output High Voltage (V
OH
) 90%*V
dd
V
I
OH
=-4mA (V
dd
=3.0V or 3.3V)
I
OH
=-3mA (V
dd
=2.8V or 2.5V)
I
OH
=-2mA (V
dd
=1.8V)
Output Low Voltage (V
OL
) 10%*V
dd
V
I
OL
=4mA (V
dd
=3.0V or 3.3V)
I
OL
=3mA (V
dd
=2.8V or 2.5V)
I
OL
=2mA (V
dd
=1.8V)
Input High Voltage(V
IH
) 70%*V
dd
V
Pin 1
Input Low Voltage(V
IL
) 30%*V
dd
V
Pin 1
Input Pull-up Impedance ( Z
in
) 50 87 150 kΩ
Pin 1, OE logic high or logic low,
ST logic high
2 MΩ
Pin 1, ST logic low
RMS Period Jitter ( T
jitt
)
1.8 3
ps
F=75MHz, V
dd
=2.5V, 2.8V, 3.0V or
3.3V
1.8 3 F=75MHz, V
dd
=1.8V
1.9 3 F=125MHz, V
dd
=2.5V, 2.8V, 3.0V or
3.3V
1.8 4 F=125MHz, V
dd
=1.8V
Peak-to-peak Period Jitter (T
pk
) 12 25 ps
F=75MHz, 125MHz, V
dd
=2.5V, 2.8V,
3.0V or 3.3V
14 30 F=75MHz, 125MHz, V
dd
=1.8V
RMS Phase Jitter (random) ( T
phj
)
0.5 0.9
ps
F=75MHz, integration
bandwidth=900kHz to 7.5MHz
1.3 2 F=75MHz, integration bandwidth=12kHz
to 20MHz
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
PART IDENTIFICATION:
ASTMLP - - MHz- - -
Packaging
Blank: Bulk
T: Tape & Reel
(1kpcs / reel)
T3: Tape & Reel
(3kpcs / reel)
Package Size
A: 2.0x1.6mm
D: 2.5x2.0mm
E: 3.2x2.5mm
FL: 5.0x3.2mm
V: 7.0x5.0mm
Operating Temp.
E: -20°C ~ +70°C
L: -40°C ~ +85°C
Output Frequency
in MHz
e.g. 7.3728,
125.000
Freq. Stability
J: ±20ppm
R: ±25 ppm
C: ±50 ppm
Supply Voltage
Blank: 2.25V~3.63V
18: 1.8V±10%
25: 2.5V±10%
28: 2.8V±10%
30: 3.0V±10%
33: 3.3V±10%
Output Drive Strength*
Blank: Default
L**
A**
R
B
T
E
U
F
* See Table 1 to 5 for the Rise/Fall times at
different drive strength and available options
** Only available for F=1MHz~110MHz
Pin 1 Function
E: Output Enable
S: Standby
N: No Connect
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Note: 1. Exceeding this temperature for extended period of time may damage the device
Thermal Consideration
Maximum Operating Junction Temperature
(2)
Note: 2. Datasheet specifications are not guaranteed if junction temperature exceeds the maximum operating junction temperature
Parameters Min. Max. Unit
051 56- erutarepmeT egarotS °C
VDD V 4 5.0-
Electrostatic Discharge (HBM)
2000 V
Soldering Temperature
(follow standard Pb free soldering guidelines)
260 °C
Junction Temperature (1) 051 °C
Package θJA, 4 Layer Board
(°C/W)
θJA, 2 Layer Board
(°C/W)
θJC, Bottom
(°C/W)
7.0 x 5.0mm 142 273 30
5.0 x 3.2mm 97 199 24
3.2 x 2.5mm
109
212 27
2.5 x 2.0mm
117
222 26
2.0 x 1.6mm 152 252 36
Max. Operating Temperature (ambient) Max. Operating Junction Temperature
C°08 C°07
C°59 C°58
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Table 1: V
dd
=1.8V Rise/Fall Times for Specific C
LOAD
Table 2: V
dd
=2.5V Rise/Fall Times for Specific C
LOAD
Table 3: V
dd
=2.8V Rise/Fall Times for Specific C
LOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
Drive
Strength
Options
C
LOAD
5pF 15pF 30pF 45pF 60pF
L 6.16 11.61 22.00 31.27 39.91
A 3.19 6.35 11.00 16.01 21.52
R 2.11 4.31 7.65 10.77 14.47
B 1.65 3.23 5.79 8.18 11.08
T 0.93 1.91 3.32 4.66 6.48
E 0.78 1.66 2.94 4.09 5.74
U 0.70 1.48 2.64 3.68 5.09
F or Blank
(default) 0.65 1.30 2.40 3.35 4.56
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF
T 0.93 N/A
E 0.78 N/A
U 0.70 1.48
F or Blank
(default) 0.65 1.30
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF 45pF 60pF
L 4.13 8.25 12.82 21.45 27.79
A 2.11 4.27 7.64 11.20 14.49
R 1.45 2.81 5.16 7.65 9.88
B 1.09 2.20 3.88 5.86 7.57
T 0.62 1.28 2.27 3.51 4.45
E or Blank
(default) 0.54 1.00 2.01 3.10 4.01
U 0.43 0.96 1.81 2.79 3.65
F 0.34 0.88 1.64 2.54 3.32
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF
R 1.45 N/A
B 1.09 N/A
T 0.62 1.28
E or Blank
(default) 0.54 1.00
U 0.43 0.96
F 0.34 0.88
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF 45pF 60pF
L 3.77 7.54 12.28 19.57 25.27
A 1.94 3.90 7.03 10.24 13.34
R 1.29 2.57 4.72 7.01 9.06
B 0.97 2.00 3.54 5.43 6.93
T 0.55 1.12 2.08 3.22 4.08
E or Blank
(default) 0.44 1.00 1.83 2.82 3.67
U 0.34 0.88 1.64 2.52 3.30
F 0.29 0.81 1.48 2.29 2.99
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF
R 1.29 N/A N/A
B 0.97 N/A N/A
T 0.55 1.12 N/A
E or Blank
(default) 0.44 1.00 N/A
U 0.34 0.88 N/A
F 0.29 0.81 1.48
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Table 4: V
dd
=3.0V Rise/Fall Times for Specific C
LOAD
Table 5: V
dd
=3.3V Rise/Fall Times for Specific C
LOAD
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF 45pF 60pF
L 3.60 7.21 11.97 18.74 24.30
A 1.84 3.71 6.72 9.86 12.68
R 1.22 2.46 4.54 6.76 8.62
B 0.89 1.92 3.39 5.20 6.64
T or Blank
(default) 0.51 1.00 1.97 3.07 3.90
E 0.38 0.92 1.72 2.71 3.51
U 0.30 0.83 1.55 2.40 3.13
F 0.27 0.76 1.39 2.16 2.85
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF
R 1.22 N/A N/A
B 0.89 N/A N/A
T or Blank
(default) 0.51 1.00 N/A
E 0.38 0.92 N/A
U 0.30 0.83 N/A
F 0.27 0.76 1.39
(a) Output Frequency: 1MHz – 110MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF 45pF 60pF
L 3.39 6.88 11.63 17.56 23.59
A 1.74 3.50 6.38 8.89 12.19
R 1.16 2.33 4.29 6.04 8.34
B 0.81 1.82 3.22 4.52 6.33
T or Blank
(default) 0.46 1.00 1.86 2.60 3.84
E 0.33 0.87 1.64 2.30 3.35
U 0.28 0.79 1.46 2.05 2.93
F 0.25 0.72 1.31 1.83 2.61
(b) Output Frequency: 115MHz – 137MHz
Rise/Fall Time Typ. (ns)
Drive Strength
Options
C
LOAD
5pF 15pF 30pF
R 1.16 N/A N/A
B 0.81 N/A N/A
T or Blank
(default) 0.46 1.00 N/A
E 0.33 0.87 N/A
U 0.28 0.79 1.46
F 0.25 0.72 1.31
CALCULATING MAXIMUM FREQUENCY
Based on the rise and fall time data given in Table 1 through 5, the maximum frequency the oscillator can operate with
a guaranteed full swing of the output voltage over temperature is calculated as follows:
1
Example:
Calculate F
max
of a 1MHz ~ 110MHz device with the following condition:
º V
dd
= 1.8V (Table 1)
º Capacitive Load = 30pF
º Desired T
r/f
Time: = 3ns (rise/fall time option code “E”)
The F
max
is 66.66666MHz.
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
All plots are measured with 15pF load at room temperature, unless otherwise stated.
1MHz-110MHz Devices 115MHz -137MHz Devices
I
DD
vs. Frequency
Frequency vs. Temperature
1MHz-110MHz Devices 115MHz -137MHz Devices
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
1MHz-110MHz Devices 115MHz -137MHz Devices
1MHz-110MHz Devices 115MHz -137MHz Devices
RMS Period Jitter vs. Frequency
Duty Cycle vs. Frequency
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
1MHz-110MHz Devices 115MHz -137MHz Devices
1MHz-110MHz Devices 115MHz -137MHz Devices
20% - 80% Rise Time vs. Temperature
20% - 80% Fall Time vs. Temperature
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
RMS Integrated Phase Jitter Random (12kHz to 20MHz) vs Frequency
(3)
1MHz-110MHz Devices 115MHz -137MHz Devices
RMS Integrated Phase Jitter Random (900kHz to 20MHz) vs Frequency
(3)
1MHz-110MHz Devices 115MHz -137MHz Devices
Notes: 3. Phase noise plots are measured with Agilent E5052B signal source analyzer. Integration range is up to 5MHz for carrier
frequencies below 40MHz.
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TYPICAL PERFORMANCE DATA
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
OUTLINE DIMENSION:
Recommended Land Pattern
Recommended Land Pattern
Recommended Land Pattern
2.0 x 1.6mm Package (Option “A”)
2.5 x 2.0mm Package (Option “D”)
3.2 x 2.5mm Package (Option “E”)
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
5.0 x 3.2mm Package (Option “FL”)
7.0 x 5.0mm Package (Option “V”)
Dimensions: mm
Recommended Land Pattern
Recommended Land Pattern
OUTLINE DIMENSION:
Pin Name Functionality
1 OE/ST
Output Enable H or Open
(4)
: specified frequency output
L: output is high impedance. Only output driver is disabled
Standby
H or Open
(4)
: specified frequency output
L: output is low (weak pull down). Device goes to sleep
mode. Supply current reduces to I
std
.
No Connect Any voltage between 0 and V
dd
or Open
(4)
: specified
frequency output. Pin 1 has no function.
2 GND Power Electrical ground
(5)
3 Out Output Oscillator clock output
4 V
dd
Power Power supply voltage
(5)
Notes: 4. In OE or ST mode, a pull-up resistor of <10kΩ between OE/ST pin and V
dd
is recommended if pin 1
is not externally driven. If pin 1 needs to be left floating, use the NC option.
5. A capacitor value of 0.1µF between V
dd
and GND is required.
ASTMLP
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
REFLOW PROFILE:
Item Conditions
T
S
MAX to T
L
(Ramp-up Rate) 3°C/second max
Preheat
Temperature Minimum (T
S
MIN) 150°C
Temperature Typical (T
S
TYP) 175°C
Temperature Maximum (T
S
MAX) 200°C
Time (t
S
sdnoces 081 – 06 )
Ramp-up Rate (T
L
to T
P
) 3°C/second max
Time Maintained Above
Temperature (T
L
) 217°C
Time (t
L
sdnoces 051 – 06 )
Peak Temperature (T
P
) 260°C max
Target Peak Temperature (T
P
Target) 255°C
Time within 5°C of actual peak (t
P
) 20 – 40 seconds
Max. Number of Reflow Cycles 3
Ramp-down Rate 6°C/second max
Time 25°C to Peak Temperature (t) 8 minutes max
TAPE & REEL:
ASTMLP
Unit: mm
Device Size D0 D1 min. E1 E2 min. F P0 P1 P2
2016 1.55±0.05 0.9 1.75±0.1 6.05 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05
2520 1.55±0.05 1.0 1.75±0.1 5.85 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05
3225 1.5+0.1/-
0.0 1.0 1.75±0.1 5.95 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05
5032 1.5+0.1/-
0.0 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 8.0±0.1 2.0±0.05
7050 1.5+0.1/-
0.0 1.5 1.75±0.1 14.25 7.5±0.1 4.0±0.1 8.0±0.1 2.0±0.1
Device Size T T1 max. T2 max. W max. A0 B0 K0
2016 0.3±0.05 0.1 1.55 8.3 1.9±0.05 2.3±0.05 1.00±0.10
2520 0.3±0.05 0.1 1.65 8.3 2.25±0.05 2.8±0.05 1.10±0.10
3225 0.2±0.05 0.1 1.6 8.2 2.7±0.10 3.4±0.10 1.15±0.10
5032 0.6 0.1 1.65 12.3 3.5±0.10 5.3±0.10 1.10±0.10
7050 0.6 0.1 1.80 16.3 5.4±0.10 7.4±0.10 1.3±0.10
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
Pb
RoHS/RoHS II compliant
ASTMLP
Low power, Programmable SMD MEMS Oscillator
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
TAPE & REEL:
ASTMLP
Unit: mm
Tape Size A max. B min. C D min. N W1 W2 max.
8mm 180 1.5 13.0+0.6/-0.2 20.2 60±0.5 8.4+1.5/-0 14.4
12mm 180 1.5 13.0±0.2 20.2 60±0.5 12.4+2.0/-0 18.4
330 1.5 13.0±0.2 20.2 100±0.5 12.4+2.0/-0 18.4
16mm 180 1.5 13.0±0.2 20.2 60±0.5 16.4+2.0/-0 22.4
330 1.5 13.0±0.2 20.2 100±0.5 16.4+2.0/-0 22.4
Device Size “T” (1k/reel) “T3” (3k/reel)
2016 8mm Tape7” Reel 8mm Tape7” Reel
2520 8mm Tape7” Reel8mm Tape7” Reel
3225 8mm Tape7” Reel8mm Tape7” Reel
5032 12mm Tape7” Reel12mm Tape13” Reel
7050 16mm Tape7” Reel16mm Tape13” Reel
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018
ATTENTION: Abracon LLC’s products are COTS – Commercial-O-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica -
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
