DS04-23122-5E
FUJITSU MEDIA DEVICE
DATA SHEET
ASSP Mobile Communication Systems
Piezoelectric SAW BPF
(700 MHz to 1700 MHz)
F5CP/F6CP Series (D2 type)
■DESCRIPTION
The F5CP/F6CP series of SAW band pass filters have 2.5 mm × 2.0 mm × 0.9 mm (h) of ultra small package,
which are available in the 700 MHz to 1700 MHz frequency range. They exhibit high stability by using single
crystal, Lithium Tantalate (LiTaO 3) with a large electro-mechanical coefficient.
Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems.
Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G.
■FEATURES
• Ultra compact and light package (2.5 mm × 2.0 mm × 0.9 mm (h) *)
*: 1.0 mm height maximum
• Excellent stop band attenuation
• External matching are not required (50 Ω I/O)
• Standard devices are available for mobile communication standards
■PACKAGE
F5CP/F6CP Series (D2 type)
2
■PIN ASSIGNMENT
■PIN DESCRIPTION
Pin No. Symbol Descriptions
1 IN Input pin
2 GND Ground pin
3 OUT Output pin
4 GND Ground pin
(BOTTOM VIEW)
1
4
2
3
F5CP/F6CP Series (D2 type)
3
■ABSOLUTE MAXIMUM RATINGS
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■RECOMMENDED OPERATING CONDITIONS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
piezoelectric device. All of the device’s electr ical characteristics are warranted when the device is
operated within these ranges.
Always use piezoelectric devices within their recommended operating conditionranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
■STANDARD DEVICES
Parameter Symbol Rating Unit
Min Max
Ambient operating temperature Ta −30 +85 °C
Storage temperature Tstg −40 +100 °C
Input power F5CP Series Pin +15 dBm
F6CP Series +10 dBm
Input DC voltage −5+5V
Parameter Symbol Value Unit
Min Max
Operating temperature Ta −30 +85 °C
System Center
frequency (MHz) Band width
(MHz) Part
symbol Part number Re-
marks
AMPS/CDMA/
TDMA TX836.5 25 3 FAR-F5CP-836M50-D203
RX881.5 25 4 FAR-F5CP-881M50-D204
PDC1.5G TX1441.0 24 7 FAR-F6CP-1G4410-D207
R FAR-F6CP-1G4410-D20R
F5CP/F6CP Series (D2 type)
4
■ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
1. SYSTEM : AMPS-Tx
PART NUMBER : FAR-F5CP-836M50-D203
Parameter Conditions Value Unit Remarks
Min Typ Max
Insertion loss 824 MHz to 849 MHz 3.0 3.5 dB
In-band ripple 824 MHz to 849 MHz 1.1 1.6 dB
Absolute
attenuation
DC to 800 MHz 45 50 dB
869 MHz to 1049 MHz 29 35 dB
1049 MHz to 2000 MHz 45 50 dB
In-band VSWR
(Return loss) 824 MHz to 849 MHz
(8.5) 1.9
(10.2) 2.2
()
(dB)
2
1
S11 1U FS 1 : 38.709 Ω0.1641 Ω
S21 log MAG 10 dB/ REF 0 dB
CENTER 835 MHz SPAN 300 MHz
CENTER 835 MHz SPAN 300 MHz
1 : −2.8742 dB
824 MHz
S22 1U FS 1 : 38.223 Ω1.1992 Ω231.63 pH
824 MHz
2 : 70.09 Ω
−9.5508 Ω
849 MHz
3 : 2.4951 Ω
−30.189 Ω
800 MHz
4 : 13.344 Ω
−140.89 Ω
869 MHz
S11 SWR 1 / REF 1
CENTER 835 MHz SPAN 300 MHz
CENTER 835 MHz SPAN 300 MHz
1 : 1.2937
824 MHz
3
4
3
3
4
4
34
1
2
31.689 pH
824 MHz
2 : 70.559 Ω
−11.789 Ω
849 MHz
3 : 2.6631 Ω
−30.007 Ω
800 MHz
4 : 13.117 Ω
−138.59 Ω
869 MHz
1
2
1
2
2 : −2.7828 dB
849 MHz
3 : −51.439 dB
800 MHz
4 : −34.045 dB
869 MHz
2 : 1.4867
849 MHz
3 : 25.566
800 MHz
4 : 33.367
869 MHz
F5CP/F6CP Series (D2 type)
5
2. SYSTEM : AMPS-Rx
PART NUMBER : FAR-F5CP-881M50-D204
Parameter Conditions Value Unit Remarks
Min Typ Max
Insertion loss 869 MHz to 894 MHz 2.9 3.5 dB
In-band ripple 869 MHz to 894 MHz 1.0 1.6 dB
Absolute
attenuation
DC to 779 MHz 45 50 dB
779 MHz to 849 MHz 40 47 dB
914 MHz to 970 MHz 28 33 dB
970 MHz to 1049 MHz 50 60 dB
1049 MHz to 2000 MHz 40 50 dB
In-band VSWR
(Return loss) 869 MHz to 894 MHz
(8.5) 1.9
(10.2) 2.2
()
(dB)
2
1
S11 1U FS 1 : 52.887 Ω−4.0195 Ω
S21 log MAG 10 dB/ REF 0 dB
CENTER 880 MHz SPAN 300 MHz
CENTER 880 MHz SPAN 300 MHz
1 : −2.8617 dB
869 MHz
S22 1U FS 1 : 54.602 Ω1.627 Ω297.97 pH
869 MHz
2 : 80.621 Ω
−8.7813 Ω
894 MHz
3 : 2.5654 Ω
−22.138 Ω
849 MHz
4 : 15.594 Ω
−156.26 Ω
914 MHz
S11 SWR 1 / REF 1
CENTER 880 MHz SPAN 300 MHz
CENTER 880 MHz SPAN 300 MHz
1 : 1.1015
869 MHz
3
4
3
3
4
4
2
1
34
45.564 pF
869 MHz
2 : 80.242 Ω
−14.598 Ω
894 MHz
3 : 2.4668 Ω
−22.392 Ω
849 MHz
4 : 12.961 Ω
−142.84 Ω
914 MHz
2 : −3.0293 dB
894 MHz
3 : −56.249 dB
849 MHz
4 : −33.517 dB
914 MHz
2 : 1.6896
894 MHz
3 : 24.367
849 MHz
4 : 35.586
914 MHz
1
2
1
2
F5CP/F6CP Series (D2 type)
6
3. SYSTEM : PDC1.5G-Tx
PART NUMBER : FAR-F6CP-1G4410-D207
Parameter Conditions Value Unit Remarks
Min Typ Max
Insertion loss 1429 MHz to 1453 MHz 3.5 3.8 dB
In-band ripple 1429 MHz to 1453 MHz 1.3 1.6 dB
Absolute
attenuation
DC to 1380 MHz 40 45 dB
1477 MHz to 1501 MHz 25 28 dB
1501 MHz to 1607 MHz 28 30 dB
1607 MHz to 1900 MHz 45 55 dB
1900 MHz to 3000 MHz 30 33 dB
In-band VSWR
(Return loss) 1429 MHz to 1453 MHz
(7.0) 2.4
(7.7) 2.6
()
(dB)
S11 1U FS 1 : 39.924 Ω0.0859 Ω
S21 log MAG 10 dB/ REF 0 dB
CENTER 1 450 MHz SPAN 400 MHz
CENTER 1 450 MHz SPAN 400 MHz
1 : −2.6466 dB
1.429 GHz
S22 1U FS 1 : 39.836 Ω0.4395 Ω48.944 pH
1.429 GHz
2 : 67.617 Ω
−12.059 Ω
1.453 GHz
3 : 4.1484 Ω
−25.398 Ω
1.38 GHz
4 : 23.188 Ω
−166.48 Ω
1.477 GHz
5 : 8.541 Ω
−61.674 Ω
1.607 GHz
S11 SWR 1 / REF 1
CENTER 1 450 MHz SPAN 400 MHz
CENTER 1 450 MHz SPAN 400 MHz
4
5
3
3
4
5
4
5
2
1
34
9.5712 pH
1.429 GHz
2 : 66.582 Ω
−14.813 Ω
1.453 GHz
3 : 3.9805 Ω
−24.466 Ω
1.38 GHz
4 : 15.57 Ω
−133.34 Ω
1.477 GHz
5 : 7.3418 Ω
−55.936 Ω
1.607 GHz
2 : −2.8931 dB
1.453 GHz
3 : −48.237 dB
1.38 GHz
4 : −30.021 dB
1.477 GHz
5 : −61.614 dB
1.607 GHz
3
2
1
5
2 : 1.4666
1.453 GHz
3 : 15.581
1.38 GHz
4 : 26.309
1.477 GHz
5 : 15.408
1.607 GHz
1 : 1.2523
1.429 GHz
1
2
2
1
F5CP/F6CP Series (D2 type)
7
4. SYSTEM : PDC1.5G-Tx
PART NUMBER : FAR-F6CP-1G4410-D20R
Parameter Conditions Value Unit Remarks
Min Typ Max
Insertion loss 1429 MHz to 1453 MHz 2.5 3.0 dB
In-band ripple 1429 MHz to 1453 MHz 0.8 1.4 dB
Absolute
attenuation
DC to 1380 MHz 40 45 dB
1477 MHz to 1501 MHz 20 32 dB
1501 MHz to 1607 MHz 28 32 dB
1607 MHz to 1900 MHz 45 51 dB
1900 MHz to 3000 MHz 30 45 dB
In-band VSWR
(Return loss) 1429 MHz to 1453 MHz
(7.4) 1.7
(11.7) 2.5
()
(dB)
S11 1U FS 1 : 3.01006 Ω−30.558 Ω
S21 log MAG 10 dB/ REF 0 dB
CENTER 1 450 MHz SPAN 400 MHz
CENTER 1 450 MHz SPAN 400 MHz
1 : −49.815 dB
1.38 GHz
S22 1U FS 1 : 3.1895 Ω−31.245 Ω3.6911 pF
1.38 GHz
2 : 39.359 Ω
−3.7520 Ω
1.429 GHz
3 : 62.402 Ω
−5.4785 Ω
1.453 GHz
4 : 17.336 Ω
−161.48 Ω
1.477 GHz
5 : 16.094 Ω
−84.156 Ω
1.501 GHz
S11 SWR 1 / REF 1
CENTER 1 450 MHz SPAN 400 MHz
CENTER 1 450 MHz SPAN 400 MHz
45
3
3
4
5
4
5
2
1
3
4 5
3.7742 pF
1.38 GHz
2 : 39.143 Ω
−3.5684 Ω
1.429 GHz
3 : 60.367 Ω
−10.139 Ω
1.453 GHz
4 : 16.492 Ω
−154.35 Ω
1.477 GHz
5 : 14.699 Ω
−81.426 Ω
1.501 GHz
2 : −2.4229 dB
1.429 GHz
3 : −2.5064 dB
1.453 GHz
4 : −32.603 dB
1.477 GHz
5 : −33.819 dB
1.501 GHz
3
2
1
2 : 1.2938
1.429 GHz
3 : 1.3010
1.453 GHz
4 : 32.211
1.477 GHz
5 : 12.634
1.501 GHz
1 : 22.149
1.38 GHz
1
2
2
1
CH1 Markers
F5CP/F6CP Series (D2 type)
8
■MEASUREMENT CIRCUIT
■PART NUMBER DESIGNATION
[Designation example]
■MARKING
(1) Frequency range 5 : 700 MHz to 1000 MHz
6 : 1000 MHz to 1700 MHz
(2) Package size P : 2.5 mm × 2.0 mm × 0.9 mm
(3) Frequency This specifies the nominal center frequency using six alphanumeric.
M (for MHz) or G (for GHz) indicates the decimal point.
[Example] 836.5 MHz → 836M50
1.441 GHz → 1G4410
(4) Part symbol Numbers specified by Fujitsu
Refer to ■STANDARD DEVICES
(5) Packing (Reeled tape) K : 1000 pcs / reel
J : 5000 pcs / reel
1 to 4 : Pin numbers
50 Ω50 Ω
Network Analyzer Network Analyzer
13
Filter
2, 4
(2)
FAR-F5CP- -D2 -
(1) (3) (4) (5)
Production date (EIAJ) Lot CodePart symbol
INDEX
F5CP/F6CP Series (D2 type)
9
■PACKAGE DIMENSION
■RECOMMENDED FOOT PATTERN ON PCB
2.5 ± 0.10
0.9 ± 0.10 0.88 ± 0.10
0.63 ± 0.10
4 − R0.18
2.0 ± 0.10
0.5 Min
0.5 Min
(C 030)
INDEX
3
2
4
1
Dimensions in mm.
0.88
0.5
0.88
0.5
1.20.8
1.2 0.5
Dimensions in mm.
F5CP/F6CP Series (D2 type)
10
■PACKING
(1) Reel dimensions
(2) Packing style
1.5 Min
φ12.8 Min
φ20.2 Min
φ80.0
φ250.0
R0.58
9.5 ± 0.5
13.8 Max
Type Volume
K 1000 pcs
J 5000 pcs Dimensions in mm.
#1 PIN
Pulling side
Reel side
Pulling side
F5CP/F6CP Series (D2 type)
11
(3) Tape dimensions
(4) Peel strength of top cover tape
φ1.5
φ1.0 Min 4.0 ± 0.1
2.0 ± 0.05 4.0 ± 0.1 0.3 ± 0.05
1.0
3.5 ± 0.05 1.75 ± 0.1
8.0 ± 0.2
2.8 ± 0.1
2.3 ± 0.1
+0.1
−0.0
+0.1
−0.0
Dimensions in mm.
165 ° to 180 °
Direction of pulling Speed 300 mm/min
Embossment carrier type tape
Peel off by the force of 0.1 N to 1.0 N under the
condition at the right .
(Conforms to EIA)
F5CP/F6CP Series (D2 type)
12
■RECOMMENDED REFLOW PROFILE
■NOTE
Mass-produced product order is accepted by a unit of 1000.
240
210
150 Pre-Heating
10 s
60 s
60 s ∼ 90 s
Time (s)
Temperature (°C)
Heating rate
1°C/s to 4 °C/s
Air cooling
F5CP/F6CP Series (D2 type)
FUJITSU MEDIA DEVICES LIMITED
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU MEDIA
DEVICES sales representatives before ordering.
The information, such as descriptions of function and application
circuit examples, in this document are presented solely for the
purpose of reference to show examples of operations and uses of
FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA
DEVICES does not warrant proper operation of the device with
respect to use based on such information. When you develop
equipment incorporating the device based on such information, you
must assume any responsibility arising out of such use of the
information. FUJITSU MEDIA DEVICES assumes no liability for
any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of
function and schematic diagrams, shall not be construed as license
of the use or exercise of any intellectual property right, such as
patent right or copyright, or any other right of FUJITSU MEDIA
DEVICES or any third party or does FUJITSU MEDIA DEVICES
warrant non-infringement of any third-party’s intellectual property
right or other right by using such information. FUJITSU MEDIA
DEVICES assumes no liability for any infringement of the
intellectual property rights or other rights of third parties which
would result from the use of information contained herein.
The products described in this document are designed, and
manufactured as contemplated for general use, including without
limitation, ordinary industrial use, general office use, personal use,
and household use, but are not designed, developed and
manufactured as contemplated (1) for use accompanying fatal risks
or dangers that, unless extremely high safety is secured, could have
a serious effect to the public, and could lead directly to death,
personal injury, severe physical damage or other loss (i.e., nuclear
reaction control in nuclear facility, aircraft flight control, air traffic
control, mass transport control, medical life support system, missile
launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial
satellite).
Please note that FUJITSU MEDIA DEVICES will not be liable
against you and/or any third party for any claims or damages arising
in connection with above-mentioned uses of the products.
Any electronic devices have inherently a certain rate of failure. You
must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.
F0308
FUJITSU LIMITED Printed in Japan
