Features _äìÉ`çêÉ
∆
RJjìäíáãÉÇá~=bñíÉêå~ä
■
Fully Qualified Bluetooth v2.1 + EDR
Specification System
■
Best in Class Bluetooth Radio with 8dBm
Transmit Power and -90dBm Receive Sensitivity
■
64MIPS Kalimba DSP Co-processor
■
16-bit Internal Stereo CODEC 95dB SNR for DAC
■
Low-power 1.5V Operation, 1.8V to 3.6V I/O
■
Integrated 1.5V and 1.8V Linear Regulators
■
Integrated Switched-mode Regulator
■
Integrated Battery Charger
■
USB, I
2
C and UART with Dual-port Bypass Mode
to 4Mbits/s
■
Supports up to 32Mbit of External Flash Memory
(8Mbit Typical Requirement)
■
Multi-configurable I
2
S, PCM or SPDIF Interface
■
Enhanced Audibility and Noise Cancellation
■
8 x 8 x 1.2mm, 0.5mm pitch 169-ball TFBGA
■
Support for 802.11 Co-existence
■
RoHS Compliant
Single Chip Bluetooth
®
v2.1 + EDR
System
Production Information
BC57E687B
Issue 2
General Description
The _äìÉ`çêÉ
∆
RJjìäíáãÉÇá~=bñíÉêå~ä is a single-chip
radio and baseband IC for Bluetooth 2.4GHz systems.
BlueCore5‑Multimedia External interfaces up to
32Mbit of external Flash memory. When used with the
CSR Bluetooth stack, it provides a fully compliant
Bluetooth v2.1 + EDR specification system for data
and voice.
2.4
GHz
Radio
I/O
RF IN
RF OUT
FLASH
RAM
Baseband
DSP
MCU
Kalimba DSP
External Memory
UART/USB
PIO
Audio In/Out
PCM/I
2
S/SPDIF
SPI
XTAL
Applications
■
High-quality Stereo Wireless Headsets
■
High-quality Mono Headsets
■
Hands-free Car Kits
■
Wireless Speakers
■
VoIP Handsets
■
Analogue and USB Multimedia Dongles
■
Bluetooth-enabled Automotive Wireless
Gateways
BlueCore5‑Multimedia External contains the Kalimba
DSP co-processor with double the MIPS of
BlueCore3‑Multimedia External, supporting enhanced
audio applications.
BlueCore5‑Multimedia External is designed to reduce
the number of external components required which
ensures production costs are minimised. The device
incorporates auto-calibration and
built-in self-test
(BIST) routines to simplify development, type approval
and production test.
To improve the performance of both Bluetooth and
802.11b/g co-located systems a wide range of co-
existence features are available including a variety of
hardware signalling: basic activity signalling, Intel
WCS activity and channel signalling.
For additional performance information refer to the
BlueCore5‑Multimedia External Product Data Sheet
.
CS-116035-TOP2 Production Information
© Cambridge Silicon Radio Limited 2006 - 2008 Page 1 of 3
_äìÉ`çêÉRJjìäíáãÉÇá~=bñíÉêå~ä=E_`RTbSUT_F Product Technical Overview
1 Device Details
Radio
■
Common TX/RX terminal simplifies external
matching; eliminates external antenna switch
■
BIST minimises production test time
■
Bluetooth v2.1 + EDR specification compliant
Transmitter
■
8dBm RF transmit power with level control from on-
chip 6-bit DAC over a dynamic range >30dB
■
Class 2 and Class 3 support without the need for an
external power amplifier or TX/RX switch
Receiver
■
Receiver sensitivity of -90dBm
■
Integrated channel filters
■
Digital demodulator for improved sensitivity and co-
channel rejection
■
Real-time digitised RSSI available on HCI interface
■
Fast AGC for enhanced dynamic range
Synthesiser
■
Fully integrated synthesiser requires no external
VCO, varactor diode, resonator or loop filter
■
Compatible with crystals 16MHz to 26MHz or an
external clock 12MHz to 52MHz
■
Accepts 14.40, 15.36, 16.2, 16.8, 19.2, 19.44,
19.68, 19.8 and 38.4MHz TCXO frequencies for
GSM and CDMA devices with sinusoidal or logic
level signals
Baseband and Software
■
32Mbit of external Flash
■
48Kbyte of internal RAM, allows full-speed data
transfer, mixed voice/data and full piconet support
■
Logic for forward error correction, header error
control, access code correlation, CRC,
demodulation, encryption bit stream generation,
whitening and transmit pulse shaping
■
Transcoders for A-law, μ-law and linear voice from
host and A-law, μ-law and CVSD voice over air
Physical Interfaces
■
SPI with clock speeds up to 64MHz in Master
mode
(1)
and 32MHz in Slave mode
■
I
2
C master compatible interface
■
UART interface with programmable data rate up to
3Mbits/s with an optional bypass mode
■
Full speed USB v1.1 interface
■
Bi-directional serial programmable audio interface
supporting PCM, I
2
S and SPDIF formats
■
Two LED drivers with faders
Kalimba DSP
■
Very low power Kalimba DSP co-processor,
64MIPS, 24-bit fixed point core
■
SBC decode takes approximately 4mW power
consumption while streaming music
■
Single-cycle MAC; 24 x 24-bit multiply and 56-bit
accumulator
■
32-bit instruction word, dual 24-bit data memory
■
24-Kbyte (6-Kword) program RAM, 36-Kbyte + 48-
Kbyte (16-Kword + 12-Kword) data RAM
■
64-word x 32-bit program memory cache when
executing from Flash
Stereo Audio CODEC
■
16-bit internal stereo CODEC
■
Dual ADC and DAC for stereo audio
■
Integrated amplifiers for driving 16Ω speakers; no
need for external components
■
Support for single-ended speaker termination and
line output
■
Integrated low-noise microphone bias
■
ADC sample rates are 8, 11.025, 16, 22.05, 32 and
44.1kHz
■
DAC sample rates are 8, 11.025, 12, 16, 22.05, 24,
32, 44.1 and 48kHz
Auxiliary Features
■
User space on processor for customer applications
■
Crystal oscillator with built-in digital trimming
■
Power management includes digital shutdown and
wake-up commands with an integrated low-power
oscillator for ultra-low power Park/Sniff/Hold mode
■
Clock request output to control external clock
■
On-chip regulators: 1.5V output from 1.8V to 2.7V
input and 1.8V output from 2.7V to 4.5V input
■
On-chip high-efficiency switched-mode regulator;
1.8V output from 2.7V to 4.4V input
■
Power-on-reset cell detects low supply voltage
■
10-bit ADC and 8-bit DAC available to applications
■
On-chip charger for lithium ion/polymer batteries
Bluetooth Stack
CSR's Bluetooth Protocol Stack runs on the on-chip
MCU in a variety of configurations:
■
Standard HCI (UART or USB)
■
Audio CODEC and echo-noise suppression or
customer-specific algorithms running on the DSP
Package Option
■
TFBGA 169-ball, 8 x 8 x 1.2mm, 0.5mm pitch
(1)
Requires firmware support
Device Details
CS-116035-TOP2 Production Information
© Cambridge Silicon Radio Limited 2006 - 2008 Page 2 of 3
_äìÉ`çêÉRJjìäíáãÉÇá~=bñíÉêå~ä=E_`RTbSUT_F Product Technical Overview
2 Ordering Information
Interface Version
Package
Order Number
Type Size Shipment
Method
UART and USB TFBGA 169-ball
(Pb free)
8 x 8 x 1.2mm,
0.5mm pitch Tape and reel BC57E687B-ITB-E4
Note:
At Production status Minimum Order Quantity is 2kpcs taped and reeled.
To contact a CSR representative, email sales@csr.com or go to www.csr.com/contacts
Document History
Revision Date Change Reason
Issue 1 10 AUG 07 Original Publication of this document. (Replaces CS-101610-PBP3)
Issue 2 10 JUL 08 Order code update.
Temperature range moved to -40°C to 85°C.
If you have any comments about this document, email comments@csr.com giving the number, title and section with
your feedback.
Trademarks, Patents and Licenses
Unless otherwise stated, words and logos marked with
™
or
®
are trademarks registered or owned by CSR plc or its affiliates. Bluetooth
®
and the
Bluetooth logos are trademarks owned by Bluetooth SIG, Inc. and licensed to CSR. Other products, services and names used in this document may
have been trademarked by their respective owners.
The publication of this information does not imply that any license is granted under any patent or other rights owned by CSR plc.
CSR reserves the right to make technical changes to its products as part of its development programme.
While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept responsibility for any errors.
CSR’s products are not authorised for use in life-support or safety-critical applications.
Refer to www.csrsupport.com for compliance and conformance to standards information.
Ordering Information
CS-116035-TOP2 Production Information
© Cambridge Silicon Radio Limited 2006 - 2008 Page 3 of 3
_äìÉ`çêÉRJjìäíáãÉÇá~=bñíÉêå~ä=E_`RTbSUT_F Product Technical Overview
