DC/DC Converters Heatsinks Heatsink Models Order code For converter series: THL-HS1 THL 10, THL 10WI, THL 20WI, THL 25, THL 25WI THN-HS1 THN 15, THN 15WI, THN 15WIR, THN 20, THN 20WI, THN 30, THN 30WI TEN-HS1 TEN 15, TEN 20WIN, TEN 20WIR, TEN 30, TEN 30WIN, TEN 40WIR, TEN 60N, TEN 60WIN TEN-HS2 TEN 20WI, TEN 30WI TEN-HS3 TEN-HS5 TEN 40, TEN 40WI, TEN 60 TEL 15, TEL 30, TEN 10, TEN 15WI, TEN 20, TEN 40N (without 24 Vout models), TEN 40WIN (without 24 Vout models) TEN 25, TEN 25WI TEN-HS6 TEN 50, TEN 50WI, TEN 40N (just 24 Vout models), TEN 40WIN (just 24 Vout models) TEP-HS1 TEP 75WI, TEP 100, TEP 100WIR, TEP 160, TEP 160WIR, TEP 200WIR TEN-HS4 THL-HS1 Order code: THL-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 4 g (0.14oz) without converter Thermal impedance after assembling: 15.8 K/W 31.0 (1.22) max. Heat-sink Thermal pad Clamp Converter 16.3 (0.64) 17.5 (0.69) max. Dimensions in mm, () = Inch THN-HS1 Order code: THN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 8 g (0.28 oz) without converter Thermal impedance after assembling: 15.8 K/W 31.0 (1.22) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 16.5 (0.65) max. Dimensions in mm, () = Inch http://www.tracopower.com Page 1 of 5 DC/DC Converters Heatsinks TEN-HS1 Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17 g (0.60oz) without converter Thermal impedance after assembling: 10 K/W 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 16.8 (0.66) max. Dimensions in mm, () = Inch TEN-HS2 Order code: TEN-HS2 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 19 g (0.67oz) (without converter) 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 23.0 (0.9) 17.2 (0.68) max. Dimensions in mm, () = Inch http://www.tracopower.com Page 2 of 5 DC/DC Converters Heatsinks TEN-HS3 Order code: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 22g (0.78oz) (without converter) Thermal impedance after assembling: 7.6 K/W 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 25.2 (0.1) 17.0 (0.67) max. Dimensions in mm, () = Inch TEN-HS4 Heat-sink Thermal pad Clamp Converter 31.1 (1.22) 17.2 (0.68) max. 31.0 (1.22) max. Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9.0 g (0.31oz) without converter Thermal impedance after assembling: 10 K/W Dimensions in mm, () = Inch http://www.tracopower.com Page 3 of 5 DC/DC Converters Heatsinks TEN-HS5 Order code: TEN-HS5 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 19 g (0.67oz) (without converter) 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 23.0 (0.9) 17.2 (0.68) max. Dimensions in mm, () = Inch TEN-HS6 Heat-sink Thermal pad Clamp Converter 31.1 (1.22) 18.0 (0.71) max. 31.0 (1.22) max. Order code: TEN-HS6 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9.0 g (0.31oz) without converter Thermal impedance after assembling: 10 K/W Dimensions in mm, () = Inch http://www.tracopower.com Page 4 of 5 DC/DC Converters Heatsinks 0.95 (11.4) (24.2) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws Weight: 135 g (4.76 oz) (Heatsink + converter) 0.45 TEP-HS1 2.40 (61.0) 2.28 (57.9) Top view Dimensions in Inch, () = mm General Information Note: For volume orders converters will be supplied with heat-sinks preassembled and a TRACOPOWER side label attached to the converter. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Assembly instructions for TEN and THN heatsinks Example: TEN30-2412WI with heatsink TEN-HS2 The product label on converter has to be removed before mounting the heat-sink. 1. Lay out the assembly and check it for any missing components or for any damage. 2. From the converter, remove the product label, including any remaining glue (best with benzine) and, if required, apply a hand-written part number / lot number marking on the side wall of the converter 3. Remove the protective foil from the adhesive thermal pad on the heat sink 4. Apply the heatsink to the converter and secure it by the two spring fixation clips included with the heat sink assembly Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. October 2, 2018 www.tracopower.com Page 5 of 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEN-HS1 TEN-HS5 THL-HS1 TEN-HS4 THN-HS1 TEP-HS1 TEN-HS2 TEN-HS3