http://www.tracopower.com
Order code For converter series:
THL-HS1 THL 10, THL 10WI, THL 20WI, THL 25, THL 25WI
THN-HS1 THN 15, THN 15WI, THN 15WIR, THN 20, THN 20WI, THN 30, THN 30WI
TEN-HS1 TEN 15, TEN 20WIN, TEN 20WIR, TEN 30, TEN 30WIN, TEN 40WIR, TEN 60N, TEN 60WIN
TEN-HS2 TEN 20WI, TEN 30WI
TEN-HS3 TEN 40, TEN 40WI, TEN 60
TEN-HS4 TEL 15, TEL 30, TEN 10, TEN 15WI, TEN 20, TEN 40N (without 24 Vout models),
TEN 40WIN (without 24 Vout models)
TEN-HS5 TEN 25, TEN 25WI
TEN-HS6 TEN 50, TEN 50WI, TEN 40N (just 24 Vout models), TEN 40WIN (just 24 Vout models)
TEP-HS1 TEP 75WI, TEP 100, TEP 100WIR, TEP 160, TEP 160WIR, TEP 200WIR
Heatsink Models
Page 1 of 5
DC/DC Converters
Heatsinks
Order code: THL-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 4 g (0.14oz) without converter
Thermal impedance after assembling: 15.8 K/W
31.0 (1.22) max.
16.3 (0.64)
17.5 (0.69)
max.
Converter
Heat-sink
Thermal pad
Clamp
THL-HS1
THN-HS1
Order code: THN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 8 g (0.28 oz) without converter
Thermal impedance after assembling: 15.8 K/W
31.0 (1.22) max.
14.5 (0.57)
16.5 (0.65)
max.
Converter
Heat-sink
Thermal pad
Clamp
Dimensions in mm, () = Inch
Dimensions in mm, () = Inch
DC/DC Converters
Heatsinks
Page 2 of 5
http://www.tracopower.com
56.0
(2.2)
max.
23.0 (0.9)
17.2 (0.68)
max.
Converter
Heat-sink
Thermal pad
Clamp
Order code: TEN-HS2
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 19 g (0.67oz) (without converter)
TEN-HS2
Dimensions in mm, () = Inch
Order code: TEN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 17 g (0.60oz) without converter
Thermal impedance after assembling: 10 K/W
56.0 (2.2) max.
14.5 (0.57)
16.8 (0.66)
max.
Converter
Heat-sink
Thermal pad
Clamp
TEN-HS1
Dimensions in mm, () = Inch
http://www.tracopower.com
DC/DC Converters
Heatsinks
Page 3 of 5
TEN-HS4
Order code: TEN-HS4
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 9.0 g (0.31oz) without converter
Thermal impedance after assembling: 10 K/W 17.2 (0.68)
max.
Converter
Heat-sink
Thermal pad
Clamp
31.0 (1.22)
max.
31.1 (1.22)
Dimensions in mm, () = Inch
TEN-HS3
56.0
(2.2)
max.
25.2 (0.1)
17.0 (0.67)
max.
Converter
Heat-sink
Thermal pad
Clamp
Order code: TEN-HS3
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 22g (0.78oz) (without converter)
Thermal impedance after assembling: 7.6 K/W
Dimensions in mm, () = Inch
http://www.tracopower.com Page 4 of 5
TEN-HS5
Order code: TEN-HS5
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 19 g (0.67oz) (without converter)
56.0 (2.2) max.
23.0 (0.9)
17.2 (0.68)
max.
Converter
Heat-sink
Thermal pad
Clamp
Dimensions in mm, () = Inch
DC/DC Converters
Heatsinks
TEN-HS6
Order code: TEN-HS6
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 9.0 g (0.31oz) without converter
Thermal impedance after assembling: 10 K/W 18.0 (0.71)
max.
Converter
Heat-sink
Thermal pad
Clamp
31.0 (1.22)
max.
31.1 (1.22)
Dimensions in mm, () = Inch
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. October 2, 2018
DC/DC Converters
Heatsinks
Page 5 of 5
General Information
Note:
For volume orders converters will be supplied with heat-sinks preassembled and a TRACOPOWER side label attached to the converter.
Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders.
Assembly instructions for TEN and THN heatsinks
Example: TEN30-2412WI with heatsink TEN-HS2
The product label on converter has to be removed before mounting the heat-sink.
1. Lay out the assembly and check it for any missing components or for any
damage.
2. From the converter, remove the product label, including any remaining glue (best
with benzine) and, if required, apply a hand-written part number / lot number
marking on the side wall of the converter
3. Remove the protective foil from the adhesive thermal pad on the heat sink
4. Apply the heatsink to the converter and secure it by the two spring fixation clips
included with the heat sink assembly
TEP-HS1
Top view
0.95
0.45
(24.2)
(11.4)
2.40 (61.0)
2.28 (57.9)
Dimensions in Inch, () = mm
Order code: TEP-HS1
Includes heatsink with termal pad and mounting screws
Weight: 135 g (4.76 oz) (Heatsink + converter)
