EGF1A - EGF1D
EGF1A-EGF1D, Rev. B
EGF1A - EGF1D
1.0 Ampere High Efficiency Glass Passivated Rectifier
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
**Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics TA = 25°C unless otherwise noted
1998 Fairchild Semiconductor Corporation
Features
•Low forward voltage drop.
•Low profile package.
• Fast switching for high efficiency.
Symbol Parameter Value Units
IOAverage Rectified Current
@ TL = 100°C1.0 A
if(surge) Peak Forward Surge Current
8.3 ms single ha lf-sine-wave
Superimposed on rated load (JEDEC method) 30 A
PDTotal Device Dissipation
Derate above 25°C2.0
13 W
mW/°C
RθJA Thermal Resista n ce, Junction to Ambient ** 85 °C/W
RθJC Therma l Resistan ce, Junct ion to Case ** 30 °C/W
Tstg Storage Temperature Range -65 to +175 °C
TJOperating Junction Temperature -65 to +175 °C
SMA/DO-214AC
COLOR BAND DENOTES CA THODE
Parameter Device Units
1A 1B 1C 1D
Peak Repetitive Reverse Voltage 50 100 150 200 V
Maximum RMS V ol tage 35 70 105 140 V
DC Reverse Voltage (Rated VR)50 100 150 200 V
Maximum Reverse Current
@ rated VRTA = 25°C
TA = 125°C10
100 µA
µA
Maximum Forward Voltage @ 1.0 A 1.0 V
Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A 50 ns
Typical J unction Capac i t ance
VR = 4.0 V, f = 1.0 MHz 15 pF
21
0. 208 (5.283)
0. 188 (4.775)
0. 181 (4.597)
0. 157 (3.988)
0. 096 (2.438)
0. 078 (1.981)
0. 062 (1.575)
0. 055 (1.397)
0. 008 (0.203)
0. 002 (0.051) 0. 012 (0.305)
0. 006 (0.152)
0. 060 (1.524)
0. 030 (0.762)
0. 114 (2.896)
0. 098 (2.489)
+
3.93
3.73
1.67
1.47
2.38
2.18
5.49
5.29
Mi nimu m Reco mm ended
Land Pattern
EGF1A - EGF1D
EGF1A-EGF1D, Rev. B
Typical Characteristics
Pulse
Generator
(Note 2)
50
Ω
NONINDUCTIVE 50
Ω
NONINDUCTIVE
DUT
(-)
(+)
OSCILLOSCOPE
(Note 1)
50
Ω
NONINDUCTIVE
50V
(approx)
NOTES:
1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf.
2. Rise time = 10 ns max; Source impedance = 50 ohms.
Reverse Recovery Time Characterstic and Test Circuit Diagram
Non-Repeti tive Su rge Current
12 51020 50100
0
10
20
30
40
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT (A)
1.0cm SET TIME BASE FOR
trr
+0.5A
0
-0.25A
-1.0A
5/ 1 0 ns/ c m
Reverse Characteri stics
0 20406080100120140
0.1
1
10
100
1000
PERCENT OF R A TED PEAK REVERSE VOLTAG E (% )
RE VE RSE CURRE NT ( A )
µ
T = 25 C
º
J
T = 25 C
º
A
T = 100 C
º
A
Forward Characteri sti cs
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
0.01
0.1
1
10
100
FORWARD VOLTAGE (V)
FOR WARD CURRENT (A)
T = 25 C
º
J
Puls e Wi dth = 30 0µS
2% Duty Cycle
T = 25 C
º
A
Typical Junction Capacitance
0.1 0.5 1 2 5 10 20 50 100 500
0
10
20
30
40
50
60
REVERSE VOLTAGE (V)
JUNCTION CA PACIT ANCE (pF)
Forward Current Derating Curve
0 255075100125150175
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
LE AD TE MP ERATURE ( C)
FOR WARD CURR ENT (A)
º
RESISTIVE OR
INDUCTIVE LOAD
P. C.B. MO UNT ED
O N 0.2 x 0 .2"
(5.0 x 5.0 mm )
CO PP ER P A D AREAS
SMA/DO-214AC (FS PKG Code P5)
SMA/DO-214AC Package Dimensions
August 1999, Rev. A
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.064
21
0.208 (5.283)
0.188 (4.775)
0.181 (4.597)
0.157 (3.988)
0.096 (2.438)
0.078 (1.981)
0.062 (1.575)
0.055 (1.397)
0.008 (0.203)
0.002 (0.051)
0.012 (0.305)
0.006 (0.152)
0.060 (1.524)
0.030 (0.762)
0.114 (2.896)
0.098 (2.489)
+
3.93
3.73
1.67
1.47
2.38
2.18
5.49
5.29
Minimum Recommended
Land Pattern
TRADEMARKS
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
SyncFET™
TinyLogic™
UHC™
VCX™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
Rev. D
