I) www.cotorelay.com P RM E DIP 14 Series Reed Relays IM) OTO DESCRIPTION Cotos epoxy molded DIP 14 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. With switching up to 50 Watts and a 4000V isolation option, the DIP 14 Series is a relay package that allows for automatic insertion directly on PCBs as well as insertion into standard 14 pin DIP sockets. APPLICATIONS eAutomatic test equipment *Process control FEATURES *Stable contact resistance over life 4000 Vac input-output isolation *Bounce free operation Industrial *High insulation resistance *Telecom eLong life > 1 billion operation *Datacom *Epoxy molded for automatic board processing *High-end security systems *RoHS Compliant & *Signaling *Metering SPECIFICATIONS Parameters Conditions Min | Typ | Max Units Contact Ratings Switching Voltage Max DC/Peak AC Resistive 200 Volts Switching Current Max DC/Peak AC Resistive 0.5 Amps Carry Current Max DC/Peak AC Resistive 2 Amps Contact Rating Max DC/Peak AC Resistive 10 Watts Life Expectancy Signal Level 1.0V, 10mA 500 x 106 Ops Static Contact Resistance 50mvV, 10mA 150 mOhms Contact Material Ru Relay Specifications Insulation Resistance Between all isolated pins at 1010 | 1012 Ohms 100V, 25C, 40%RH Capacitance Across Open Contacts 0.8 1 pF Open Contact to Coil 1.5 2 pF Dielectric Strength Between Contacts 250 VDC/Peak AC Contacts to Coil 1000 VDC/Peak AC Operate Time, including bounce At Nominal Coil Voltage 0.25 1 msec 10Hz Square Wave Release Time Zener-Diode Suppression 0.2 1 msec Enviromental Ratings Storage Temperature -40 +105 . Operating Temperature -40 +80 so Soldering Temperature Applied to pins, 5sec max +260 C Vibration Resistance? (survival) SHz - 2000Hz _ 20 Gs Shock Resistance 1141ms, 1/2 Sine Wave 100 Gs Weight 1.5 grams Details provided on this datasheet are subject to change without notice Updated 5/16/06 IM) OoTO I) www.cotorelay.com PRME DIP 14 Series Reed Relays COIL SPECIFICATIONS Contact Form Coil Voltage Coil Resistance | Operate Voltage Nominal Input Power Units Volts Ohms Volts Volts mW Conditions +/- 10% (25C) Must operate by (25C) Must release by (25C) Part # Min | Typ Max] Min Typ | Max | Min Typ | Max. Min. Typ Max Min Typ | Max PRME25005 1 FormA | 5 19 | 450 500 550] 08 | 3.8 0.8 3.8 50 PRME15005 1 FormA 5 15 | 342 380 418 1 O10 1 3.5 66 PRME15002 1 FormA 12 19 | 477. 530 | 583 1 | 8 1 8 272 PRME15003 1 FormA 24 _ 32 |1800| 200 2200| 2 162 16 288 MECHANICAL DIMENSIONS Dimensions in inches [mm] 0.264 [6.71] Max | 0.01 i __ q 7 1 O A 17 es In4 q D D 21 eal |13 0.400 | | 0.772 [10.16] 9.61] Max 0.600 | / | d ji [15.24] b | | O 6 | |? qa ~ uy = 0 7 L * | 8 | | 0.125+0.010 pmE [3.2040.25] WIRING DIAGRAM [6.40] Max Set lM Options: A= ES option - pin #9 0.300 B = Diode option - pin #13 is positive [7.62] Ref AB = Shield and diode option 0.011 [0.28] =| 0.350 r [8.89] Max Details provided on this datasheet are subject to change without notice Last updated 5/16/06