NJG1612HA8
- 1 -
Ver.2008-09-03
SPDT Switch GaAs MMIC
! GENERAL DESCRIPTION ! PACKAGE OUTLINE
The NJG1612HA8 is a SPDT switch IC featured
extremely high speed switching.
This device is suitable for high speed switching of Tx/Rx
signals at sub-microwave applications.
This switch exhibits wide frequency range from 100MHz
to 5.0GHz at low operating voltage of 2.5V, and is operated
up to 20dBm at 3.0V operating voltage.
An ultra-small and ultra-thin package of USB6-A8 is adopted.
This product is RoHS directive compliant.
! FEATURES
"Low control voltage +2.5~+6.5V
"High speed switching 3ns typ.
"Low insertion loss 0.45dB typ. @f=2.5GHz
0.8dB typ. @f=5.0GHz
"High isolation 21dB typ. @f=2.5GHz
14dB typ. @f=5.0GHz
"P-0.2dB 25dBm typ. @f=2.5GHz, VCTL=3.0V
"Ultra-small & ultra-thin package USB6-A8 (Package Size: 1.0x1.2x0.38mm typ.)
! PIN CONFIGURATION
! TRUTH TABLE
VCTL1 H L
VCTL2 L H
PC-P1 ON OFF
PC-P2 OFF ON
Pin connection
1.P2
2.VCTL2
3.PC
4.VCTL1
5.P1
6.GND
Top view
NJG1612HA8
1
2
5
4
3
6
NJG1612HA8
- 2 -
! ABSOLUTE MAXIMUM RATINGS (Ta=25°C, Zs=Zl=50Ω)
PARAMETER SYMBOL CONDITIONS CONDITIONS UNITS
RF Input Power PIN V
CTL(L)=0V, VCTL(H)=3V 29 dBm
Control Voltage VCTL V
CTL(H)-VCTL(L) 7.5 V
Power dissipation PD At on PCB board
Tjmax=150°C 150 mW
Operating Temp. Topr -40~+85 °C
Storage Temp. Tstg -55~+150 °C
! ELECTRICAL CHARACTERISTICS
(General conditions: VCTL (L)=0V, VCTL (H)=3V, ZS=Zl=50Ω, Ta=25°C, with application circuit)
PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS
Control Current ICTL f=2.5GHz, PIN=10dBm - 5 10
μA
Control Voltage (LOW) VCTL (L) -0.2 - 0.2 V
Control Voltage (HIGH) VCTL (H) 2.5 3.0 6.5 V
Insertion Loss 1 Loss1 f=1GHz - 0.35 0.55 dB
Insertion Loss 2 Loss2 f=2GHz - 0.40 0.60 dB
Insertion Loss 3 Loss3 f=2.5GHz - 0.45 0.65 dB
Insertion Loss 4 Loss4 f=5GHz - 0.8 1.2 dB
Isolation 1 ISL1 f=1GHz 25 28 - dB
Isolation 2 ISL2 f=2GHz 20 23 - dB
Isolation 3 ISL3 f=2.5GHz 18 21 - dB
Isolation 4 ISL4 f=5GHz 11 14 - dB
Input Power at 0.2dB
Compression Point 1 P-0.2dB(1) f=2.5GHz 22 25 - dBm
Input Power at 0.2dB
Compression Point 2 P-0.2dB(2) f=5GHz 21 24 - dBm
VSWR1 VSWR1 f=0.1~3GHz, ON state - 1.2 1.4
VSWR2 VSWR2 f=3~5GHz, ON state - 1.5 1.7
Switching time TSW f=0.1~5GHz
50% VCTL to 10/90% RF - 3 6 ns
NJG1612HA8
- 3 -
!TERMINAL INFORMATION
No. SYMBOL DESCRIPTION
1 P2
RF port. This port is connected with PC port by controlling 2nd pin (VCTL (H))
to 2.5~6.5V and 4th pin (VCTL(L)) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (0.1~0.5GHz:
1000pF, 0.5~3GHz: 56pF, 3~5GHz: 27pF)
2 VCTL2
Control port 2. The voltage of this port controls PC to P2 state. The ‘ON’
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 4th pin has
to be set to opposite state. The bypass capacitor has to be chosen to
reduce switching time delay from 10pF~1000pF range.
3 PC
Common RF port. In order to block the DC bias voltage of internal circuit,
an external capacitor is required. (0.1~0.5GHz: 1000pF, 0.5~3GHz: 56pF,
3~5GHz: 27pF)
4 VCTL1
Control port 1. The voltage of this port controls PC to P1 state. The ‘ON’
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 2nd pin has
to be set to opposite state. The bypass capacitor has to be chosen to
reduce switching time delay from 10pF~1000pF range.
5 P1
RF port. This port is connected with PC port by controlling 4th pin (VCTL(H))
to 2.5~6.5V and 2nd pin(VCTL(L)) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit(0.1~0.5GHz:
1000pF, 0.5~3GHz: 56pF, 3~5GHz: 27pF)
6 GND
Ground terminal. Please connect this terminal with ground plane as close
as possible for excellent RF performance.
NJG1612HA8
- 4 -
-2.0
-1.5
-1.0
-0.5
0.0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Insertion Loss (dB)
Frequency (GHz)
PC-P1 Insertion Loss vs. Frequency
( VCTL1=3V, VCTL2=0V )
!ELECTRICAL CHARACTERISTICS (with Application circuit, Loss of external circuit are excluded)
-35
-30
-25
-20
-15
-10
-5
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Isolation (dB)
Frequency (GHz)
PC-P1 Isolation vs. Frequency
( VCTL1=0V, VCTL2=3V )
1.0
1.2
1.4
1.6
1.8
2.0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
VSWR
Frequency (GHz)
P1 VSWR vs. Frequency
( PC-P1 ON, VCTL1=3V, VCTL2=0V )
-2.0
-1.5
-1.0
-0.5
0.0
10 12 14 16 18 20 22 24 26 28 30
VCTL1=2V
VCTL1=2.5V
VCTL1=3V
VCTL1=6.5V
Insertion Loss (dB)
Input Power (dBm)
( f=2.5GHz, VCTL2=0V )
PC-P1 Insertion Loss vs. Input Power
-30
-25
-20
-15
-10
-5
0
-50 0 50 100
f=1GHz
f=2GHz
f=2.5GHz
f=5GHz
Isolation (dB)
Ambient Temperature ( oC )
PC-P1 Isolation vs. Ambient Tempera ture
( VCTL1=0V, VCTL2=3V )
-2.0
-1.5
-1.0
-0.5
0.0
-50 0 50 100
f=1GHz
f=2GHz
f=2.5GHz
f=5GHz
Insertion Loss (dB)
Ambient Temperature ( oC )
PC-P1 Loss vs. Ambient Temperature
( VCTL1=3V, VCTL2=0V )
NJG1612HA8
- 5 -
0
2
4
6
8
10
12
-50 0 50 100
VCTL1=2V
VCTL1=2.5V
VCTL1=3V
VCTL1=6.5V
Current ICTL (μA)
Ambient Tempe rature ( oC )
Current ICTL vs. Ambient Temperature
( PC-P1 ON, f=2.5GHz, VCTL2=0V )
!ELECTRICAL CHARACTERISTICS (with Application circuit, Loss of external circuit are excluded)
5ns/div
VCTL1
P1 Port
3ns
5ns/div
VCTL1
P1 Port
4ns
16
18
20
22
24
26
28
30
-50 0 50 100
VCTL1=2V
VCTL1=2.5V
VCTL1=3V
P-0.2d B (dBm)
Ambient Tempe rature ( oC )
PC-P1 P-0.2dB vs. Ambient Temperature
( PC-P1 ON, f=2.5GHz, VCTL2=0V )
Switching Speed 1
(PC-P1 ON, 50% VCTL1 to 90% RF)
Switching Speed 2
(PC-P1 OFF, 50 % VCTL1 to 10% RF)
NJG1612HA8
- 6 -
Parts List
! APPLICATION CIRCUIT
Parts number List 1 List 2 List 3 Notes
fin=0.1~0.5GHz fin=0.5~3GHz fin=3~5GHz
C1~C3 1000pF 56pF 27pF
GRM15 MURATA
C4, C5 10pF 10pF 10pF GRM15 MURATA
R1 560kΩ 560kΩ 560kΩ
! TEST PCB LAYOUT
PRECAUTIONS
[1] The DC blocking capacitors have to be placed at RF terminal of P1, P2 and PC.
[2] To reduce stripline influence on RF characteristics, please locate bypass capacitors (C4, C5)
close to each terminal.
Circuit losses including
losses of capacitor and
connector.
(DC blocking capacito r: 56pF)
freq Loss
1GHz 0.22dB
2GHz 0.34dB
2.5GHz 0.42dB
5GHz 0.78dB
1
2
5
4
3
6
C1
C2
C3
C5 C4
VCTL2
0V/3.0V VCTL1
3.0V/0V
PC
P2 P1
R1
VCTL1VCTL2
P1
P2
PC
C2 C1
C3
C5 C4
R1
NJG1612HA8
- 7 -
!PACKAGE OUTLINE (USB6-A8)
TERMINAL TREAT : Au
Substrate : FR5
Molding material : Epoxy resin
UNIT : mm
WEIGHT : 1.1mg
Cautions on using this product
This product contains Gallium-Arsenide (GaAs) which is a harmful material.
Do NOT eat or put into mouth.
Do NOT dispose in fire or break up this product.
Do NOT chemically make gas or powder with this product.
To waste this product, please obey the relating law of your country.
This product may be damaged with electric static discharge (ESD) or spike voltage. Please
handle with care to avoid these damages.
[CAUTION]
The specifications on this databook are only
given for information, without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
Photo resist coating
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
NJR:
NJG1612HA8-TE1