40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/acc, email: acc-sales@aeroflex.com
Parameter Specification Units
Frequency Range (min) 1 – 1.5 GHz
Sensitivity (min) 1700 mV/mW
Flatness vs. Frequency (max) 0.25 ±dB
Typical TSS -52 dBm
Nominal Video Capacitance 75 pF
Specifications:
Features:
• Contains hermetically sealed modules, inter-
nal RF matching, DC return, and RF bypass
capacitor.
• The video port is protected from static or
transient charges.
• Input impedance matching.
• Models may be chosen for broadband RF
performance of for optimized narrow bands
Revision Date: 2/23/2011
ACSP-2155
Bolt Channel Schottky Detector
Notes:
Maximum input power: +20dBm
Sensitivity is measured into an open circuit load
(>10k ohm).
Standard bias is 100uA.
Video capacitance is used for RF bypass. This value
can be changed if required for video response time.
Contact the factory for more information.
Environmental Specifications:
Designed to meet:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55°C to +125°C
Storage Temp: -65°C to +150°C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
SCREENING:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
OPTIONAL HIGH-REL SCREENING
(Ref MIL-PRF-38534):
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method
2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
Aeroflex Control Components reserves the right to make changes to any products
and services herein at any time without notice. Consult Aeroflex or an authorized
sales representative to verify that the information in this data sheet is current before
using this product. Aeroflex does not assume any responsibility or liability arising
out of the application or use of any product or service described herein, except as
expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a
product or service from Aeroflex convey a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual rights of Aeroflex or of third parties.
Copyright 2011 Aeroflex Control Components. All rights reserved.
www.aeroex.com/Microwave www.aeroex.com/ACC
Aeroflex Control Components
Aeroflex Microelectronic Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Fax: (732) 460-0214
Sales
Phone: (732) 460-0212
ACC-sales@aeroflex.com
ISO 9001:2008 certified
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Outline Drawing:
STANDARD CASE STYLE C3
(Optional Case Styles – C8, C15)
0.020 MIN
0.004
MIN
(2) PLCS.
NOT TO SCALE
DETAIL
0.080±.001
0.079±.002
0.062±.002
0.126±.004
Ø
0.096±.003 THRU
(2) PLCS.
0.135±.010
(2) PLCS.
SEE DETAIL
0.205±.003
0.160
0.280±.005
COLORED DOT
INPUT
Part Number Ordering Information:
• Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSM-2155N)
• Add “Z” for zero biased schottky option (Ex: ACSM-2155NZ)
• Add case style suffix: “M51” (Ex: ACSM-2155NZM51)
• Add “-RC” suffix: RoHS-compliant (Ex: ACSM-2155NZM51-RC)
Notes (Continued):
• This part number is also available with a zero bias schottky diode.
• Due to higher impedance, the zero bias schottky will exhibit less sensitive TSS
(typically a 3dB reduction)
• The temperature performance of the zero bias schottky is poor when operating at low
input power levels.