Control Devices Control Devices: MMP 7000 Series Low - High Power PIN Diodes Description The MicroMetrics MMP 7000 series PIN diodes are manufactured using very high resistivity silicon epitaxial material grown on a highly doped low resistivity substrate. Combined with a grown junction P++ layer, this yields a very abrupt structured "I" region with minimum outdoping and low voltage punchthrough characteristics. Features * High Temperature Passivation for Reliability Our high temperature passivation and state of the art metallization produce diodes that are designed to cover a wide range of applications that fall into the general categories of switching, phase switching, attenuating and limiting. These devices are rugged and able to meet all visual criteria in space and military applications. * Lot Traceability and Lot Control, Assuring High Reproducibility * Grown Junction for sharp "I" Region Interface * Full Area Gold Contact for the Lowest Capacitance and Largest Bonding Pad Available Packaging * Chip, Glass, Ceramic Typical Performance 1000 SERIES RESISTANCE, RS (Ohms) Applications The MMP series are used in switch applications which include high speed low power switches, medium speed higher power switches, high power switches and attenuators, TR switches, digital phase shifters and duplexers. MMP7032 MMP7033 MMP7034 MMP7035 100 MMP7036 MMP7037 10 1.0 .10 MMP7021 100 MMP7022 MMP7023 MMP7024 MMP7025 SERIES RESISTANCE, RS (Ohms) SERIES RESISTANCE, RS (Ohms) .10 1.0 10 FORWARD BIAS CURRENT, IF (mA) 100 .10 1.0 10 FORWARD BIAS CURRENT, IF (mA) 100 1000 MMP7026 MMP7027 MMP7028 MMP7029 100 MMP7030 1000 10 1.0 10 1.0 .10 .10 .01 38 .01 .10 1.0 10 FORWARD BIAS CURRENT, IF (mA) 100 .01 MicroMetrics, Inc. 136 Harvey Road, Building C, Londonderry, NH 03053 Voice: 603-641-3800, Fax: 603-641-3500, Internet: www.micrometrics.com, E-mail: serv@micrometrics.com Electrical Characteristics Ultra Fast Switching Vbr1 MIN (V) Cj-10 V2 MAX (pF) Tl3 TYP (nS) jc MAX C/W 25 25 25 25 .1 .15 .2 .25 10 10 10 10 60 50 40 35 Vbr1 MIN (V) Cj-10 V2 MAX (pF) Tl3 TYP (nS) jc MAX C/W 70 70 70 70 70 100 100 100 100 100 100 200 200 200 200 200 200 .05 .1 .15 .2 .25 .03 .07 .1 .15 .2 .3 .03 .07 .1 .15 .2 .3 60 60 60 60 60 100 100 100 100 100 100 225 225 225 225 225 225 80 70 60 55 50 90 80 70 60 55 50 90 80 70 60 55 50 TS. Max. NS 1.5 1.5 1.5 1.5 RS@ 50 MA OHMS MAX RS@ 10 MA OHMS TYP .7 .55 .45 .4 1 .8 .7 .6 Part Number Control Devices Control Devices: MMP 7000 Series MMP7010 MMP7011 MMP7012 MMP7013 Fast Switching, Low Power TS. MAX. NS 5 5 5 5 5 10 10 10 10 10 15 15 15 15 15 15 15 RS@ 75 MA OHMS MAX RS@ 20 MA OHMS TYP .9 .7 .6 .5 .45 1.2 .9 .7 .6 .5 .45 1.9 1.2 .9 .8 .7 .6 1.2 1.0 .9 .7 .5 1.9 1.5 1.2 1.0 .9 .8 3.0 2.2 1.6 1.0 .8 .7 Part Number MMP7020 MMP7021 MMP7022 MMP7023 MMP7024 MMP7025 MMP7026 MMP7027 MMP7028 MMP7029 MMP7030 MMP7031 MMP7032 MMP7033 MMP7034 MMP7035 MMP7036 Notes: 1. Reverse Breakdown Voltage measured at 10a. 2. Junction Capacitance measured at -10 volts at 1 MHz. 3. Minority Carrier lifetime measured with IF = 10 mA IR = 6mA. 4. RF Switching speed measured from 90% to 10% and 10% to 90% transmission. Drive output = +20 mA and -4 volts, 200 mA spike with a rise time of 2 nS. 5. Series Resistance is measured at 1 GHz using transmission loss techniques. Maximum Ratings Operating Temperature Storage Temperature Reverse Breakdown Voltage (Vbr) Junction Capacitance (Cj-10) Switching Speed (TS) Lifetime (Tl) Chip Thickness -55C to 150C -65C to 200C from 25 volts to 500 volts volts at 10 A from .03 pF to .5 pF at 10 volts from 1 nS to 25 nS from 5 nS to 2.0 S .004 - .007" thick Continued on next page. MicroMetrics, Inc. 136 Harvey Road, Building C, Londonderry, NH 03053 Voice: 603-641-3800, Fax: 603-641-3500, Internet: www.micrometrics.com, E-mail: serv@micrometrics.com 39 Control Devices Control Devices: MMP 7000 Series (Continued) Electrical Characteristics Medium Power, General Purpose Vbr1 MIN (V) Cj-10 V2 MAX (pF) TL3 TYP (nS) jc MAX C/W 200 200 200 200 200 200 200 200 200 200 200 200 200 200 .03 .07 .1 .15 .2 .3 .5 .03 .07 .1 .15 .2 .3 .5 400 400 400 400 400 400 400 600 600 600 600 600 600 600 65 60 55 50 45 40 20 60 55 50 45 40 35 15 TS. MAX. NS RS@ 75 MA OHMS MAX 20 20 20 20 20 20 20 25 25 25 25 25 25 25 RS@ 20MA OHMS TYP 2.6 1.5 1.3 1.0 .8 .7 .6 2.6 1.6 1.2 .9 .8 .7 .6 3.5 2.2 2.0 1.9 1.7 1.4 1.2 3.5 3.2 2.0 1.9 1.7 1.4 1.2 Part Number MMP7040 MMP7041 MMP7042 MMP7043 MMP7044 MMP7045 MMP7046 MMP7047 MMP7048 MMP7049 MMP7050 MMP7051 MMP7052 MMP7053 High Power Switching & Attenuation Vbr1 MIN (V) Cj-10 V2 MAX (pF) TL3 TYP (S) Rs5@ 1 mA MAX (Ohms) Rs5@ 10 mA MAX (Ohms) Rs5@ 100 mA MAX (Ohms) jc MAX C/W 250 250 250 250 250 500 500 500 500 500 .05 .08 .1 .2 .3 .08 .1 .2 .3 .5 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 2.0 25 20 15 8 6 40 15 10 8 6 10 8 6 3.5 2.0 8 5 4 3.5 2.0 2.0 1.5 1.2 1.0 0.8 1.5 1.2 1.0 0.8 0.7 20 20 20 15 15 15 15 12 10 10 Part Number MMP7060 MMP7061 MMP7062 MMP7063 MMP7064 MMP7065 MMP7066 MMP7067 MMP7068 MMP7069 Notes: 1. Reverse Breakdown Voltage measured at 10 A. 2. Junction Capacitance measured at -10 volts at 1 MHz. 3. Minority Carrier lifetime measured with IF = 10 mA, IR = 6 mA. 4. RF Switching speed measured from 90% to 10% and 10% to 90% transmission. Drive output = +20 mA and -4 volts, 200 mA spike with a rise time of 2 nS. 5. Series Resistance is measured at 1 GHz using transmission loss techniques. Maximum Ratings Operating Temperature Storage Temperature Reverse Breakdown Voltage (Vbr) Junction Capacitance (Cj-10) Switching Speed (Ts) Lifetime (Tl) Chip Thickness 40 -55C to 150C -65C to 200C from 25 volts to 500 volts volts at 10 A from .03 pF to .5 pF at 10 volts from 1 nS to 25 nS from 5 nS to 2.0 S .004" - .007" thick MicroMetrics, Inc. 136 Harvey Road, Building C, Londonderry, NH 03053 Voice: 603-641-3800, Fax: 603-641-3500, Internet: www.micrometrics.com, E-mail: serv@micrometrics.com