Document: SCD 27173
SiBar Thyristor Surge Protectors Status: Released
© 2007 Tyco Electronics Corporation. All rights Reserved. 1 Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxRSC-L Series
Circuit Protection's SiBar thyristor surge protection
devices are designed to help protect sensitive
telecommunication equipment from the hazards caused
by lightning, power contact, and power induction. These
devices have a high electrical surge capability to help
protect against transient faults and a high off-state
impedance, rendering them virtually transparent during
normal system operation.
SiBar thyristor surge protectors are designed to assist
telecommunication and computer telephony equipment
in meeting the applicable requirements and industry
specifications.
Applications:
• Central Office Equipment • Set top boxes
• Analog and digital linecards (xDSL, T1/E1...) • POS systems
• Phones, answering machines • Fax Machines
• PBX systems
Benefits:
• Helps provide protection for sensitive telecom
electronic equipment
• Low capacitance
• Low leakage current
• Low power dissipation
• Fast, reliable operation
• No wear-out mechanisms
• Helps designers meet worldwide telecom standards
• Helps reduce warranty and service costs
• Easy installation
• Helps improve power efficiency of equipment
Features:
• RoHS compliant available on all parts
• Bidirectional crowbar transient voltage protection
• Broad voltage range 6V – 400V
• Low capactiance 20pF-45pF @ 50V
• High off-state impedance
• Low on-state voltage
• High surge capability
• Short-circuit failure mode
• Surface-mount technology
• DO-214AA SMB package
• 10 x 1000 μs 100A surge rating
• Helps equipment comply with TIA-968,
Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45
Document: SCD 27173
SiBar Thyristor Surge Protectors Status: Released
© 2007 Tyco Electronics Corporation. All rights Reserved. 2 Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxRSC-L Series
Table SB1 - Electrical Characteristics
Part Number VDM Max.
(V)
VBO Max.
(V)
IH Min.
(mA)
VT Max.
(V)
C1 (Typ)
@ 50VDC Bias
(pF)
C2 (Typ)
@ 2VDC Bias
(pF)
Off-State
Current
@VDM
(μA)
TVB006RSC-L 6 25 50 (typ) 4 --- 75 5
TVB025RSC-L 25 40 150 4 --- 65 5
TVB035RSC-L 35 55 150 4 --- 55 5
TVB065RSC-L 65 88 150 4 45 90 5
TVB090RSC-L 90 125 150 4 40 80 5
TVB120RSC-L 120 160 150 4 35 75 5
TVB140RSC-L 140 180 150 4 30 65 5
TVB170RSC-L 170 220 150 4 30 60 5
TVB190RSC-L 190 260 150 4 30 60 5
TVB220RSC-L 220 295 150 4 30 60 5
TVB270RSC-L 275 350 150 4 30 60 5
TVB300RSC-L 320 400 150 4 25 50 5
TVB360RSC-L 360 460 150 4 25 50 5
TVB400RSC-L 400 540 150 4 20 45 5
Notes: All electrical characteristics are measured at 25°C.
V
DM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA.
V
BO measured at 100V/µs.
Table SB2 – Surge Current Rating
TIA-968 Telcordia GR-1089* IEC61000-4-5 ITU K.20/21/45*
Type A Type B
Part Number Ipp(A)
5 x 320 µs Ipp(A)
10 x 560 µs
pp (A)
10 x 160 µs Ipp (A)
10 x 1000 µs
Ipp (A)
2 x 10 µs Ipp (A)
8 x 20 µs
IPP (A)
5 x 310 μs
(VOC: 10 x 700μs)
ITSM
Min.
(A)
di/dt
(A/µs)
dV/dt
(V/µs)
TVBxxxRSC-L 150 140 200 100 500 400 150 41 500 2000
Notes: *Lightning current wave forms for applicable industry specification.
I
TSM, peak on-state surge current is measured at 60 Hz, one cycle.
di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF).
dV/dt: critical rate-of-rise of off-sta
g
e volta
g
e
(
linear wave form
,
V
D
= rated V
BO
,
T
j
= 25°C
)
Document: SCD 27173
SiBar Thyristor Surge Protectors Status: Released
© 2007 Tyco Electronics Corporation. All rights Reserved. 3 Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxRSC-L Series
Table SB3 – Dimensions in Millimeters
A B C D
Dimension Min. Max. Min. Max. Min. Max. Min. Max.
4.06 4.57 3.30 3.94 1.90 2.41 1.95 2.20
TVBxxxRSC-L (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.086)
H J K P S
Dimension Min. Max. Min. Max. Min. Max. Ref Min Max.
0.051 0.200 0.150 0.31 0.76 1.27 0.51 5.21 5.59
TVBxxxRSC-L (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.202) (0.205) (0.220)
Notes: *D dimension is measured within dimension P.
TVB series devices use industry standard SMB package type.
All devices are bidirectional and may be oriented in either direction for installation
Table SB5 – Reliability Tests
Test Conditions Duration
High temperature, reverse bias +100°C, 50VDC bias 1000 hours
High humidity, high temperature, reverse bias 85% RH, +85°C, 50VDC bias 1000 hours
High temperature storage life +150°C 1000 hours
Temperature cycling -65°C to +150°C, 15 minute dwell 1000 cycles
Autoclave 100% RH, +121°C, 15 PSI 96 hours
Table SB4 – Physical Characteristics and Environmental Specifications
Lead material Matte tin finish (-L devices)
Encapsulating material Epoxy, meets UL94V-0 requirements
Solderability per MIL-STD-750, Method 2026
Solder heat withstand per MIL-STD-750, Method 2031
Solvent resistance per MIL-STD-750, Method 1022
Mechanical shock per MIL-STD-750, Method 2016
Vibration per MIL-STD-750, Method 2056
Storage temperature (°C) -55 to 150
Operating temperature (°C) -40 to 125
Junction temperature (°C) 150
Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260
Document: SCD 27173
SiBar Thyristor Surge Protectors Status: Released
© 2007 Tyco Electronics Corporation. All rights Reserved. 4 Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxRSC-L Series
Document: SCD 27173
SiBar Thyristor Surge Protectors Status: Released
© 2007 Tyco Electronics Corporation. All rights Reserved. 5 Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxRSC-L Series
308 Constitution Drive, MS R21/2A Tel (800) 227-7040 www.circuitproection.com
Menlo Park, CA USA 94025-1164 (650) 361-6900 www.circuitprotection.com.hk (Chinese)
Fax (650) 361-2508 www.circuitprotection.jp (Japanese)
Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks.
All other trademarks and copyrights are property of their respective owners.
Table SB6 – Packaging and Marking Information
Recommended Pad Layout (millimeters/inchs)
Part
Description
Tape and Reel
Quantity
Standard
Package
Part
Marking
Dimension
A (Nom.)
Dimension
B (Nom.)
Dimension
C (Nom.)
Agency
Recognition
*
TVB006RSC-L 2,500 10,000 06RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB025RSC-L 2,500 10,000 25RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB035RSC-L 2,500 10,000 35RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB065RSC-L 2,500 10,000 65RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB090RSC-L 2,500 10,000 90RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB120RSC-L 2,500 10,000 12RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB140RSC-L 2,500 10,000 14RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB170RSC-L 2,500 10,000 17RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB190RSC-L 2,500 10,000 19RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB220RSC-L 2,500 10,000 22RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB270RSC-L 2,500 10,000 27RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB300RSC-L 2,500 10,000 30RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB360RSC-L 2,500 10,000 36RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB400RSC-L 2,500 10,000 40RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
*UL497B, File # E179610
