For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
8 - 146
HMC580ST89 / 580ST89E
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 1 GHz
v04.0710
General DescriptionFunctional Diagram
The HMC580ST89 & HMC580ST89E are InGaP
Heterojunction Bipolar Transistor (HBT) Gain
Block MMIC SMT ampli ers covering DC to 1 GHz.
Packaged in an industry standard SOT89, the
ampli er can be used as a cascadable 50 Ohm RF
or IF gain stage as well as a PA or LO driver with
up to +26 dBm output power. The HMC580ST89(E)
offers 22 dB of gain with a +37 dBm output IP3 at 250
MHz, and can operate directly from a +5V supply. The
HMC580ST89(E) exhibits excellent gain and output
power stability over temperature, while requiring a
minimal number of external bias components.
P1dB Output Power: +22 dBm
Gain: 22 dB
Output IP3: +37 dBm
Cascadable 50 Ohm I/Os
Single Supply: +5V
Industry Standard SOT89 Package
Typical Applications
The HMC580ST89 / HMC580ST89E is ideal forr:
• Cellular / PCS / 3G
• Fixed Wireless & WLAN
• CATV, Cable Modem & DBS
• Microwave Radio & Test Equipment
• IF & RF Applications
Electrical Speci cations, Vs= 5V, Rbias= 1.8 Ohm, TA = +25° C
Note: Data taken with broadband bias tee on device output.
Parameter Min. Typ. Max. Units
Gain
DC - 0.25 GHz
0.25 - 0.50 GHz
0.50 - 1.00 GHz
19
18.5
15
22
21
17
dB
dB
dB
Gain Variation Over Temperature DC - 1.0 GHz 0.005 dB/ °C
Input Return Loss
DC - 0.25 GHz
0.25 - 0.50 GHz
0.50 - 1.00 GHz
35
28
19
dB
dB
dB
Output Return Loss DC - 0.50 GHz
0.50 - 1.00 GHz
12
11
dB
dB
Reverse Isolation DC - 1.0 GHz 23 dB
Output Power for 1 dB Compression (P1dB)
DC - 0.25 GHz
0.25 - 0.50 GHz
0.50 - 1.00 GHz
19
17.5
16
22
20.5
19
dBm
dBm
dBm
Output Third Order Intercept (IP3)
(Pout= 0 dBm per tone, 1 MHz spacing)
DC - 0.25 GHz
0.25 - 0.50 GHz
0.50 - 1.00 GHz
37
35
33
dBm
dBm
dBm
Noise Figure DC - 1.0 GHz 2.8 dB
Supply Current (Icq) 88 110 mA
Features
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
8 - 147
Output Return Loss vs. Temperature
Broadband Gain & Return Loss Gain vs. Temperature
Reverse Isolation vs. Temperature
Input Return Loss vs. Temperature
Noise Figure vs. Temperature
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
0 0.5 1 1.5 2 2.5 3
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
0
4
8
12
16
20
24
0 0.25 0.5 0.75 1 1.25 1.5
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 0.3 0.5 0.8 1 1.3 1.5
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0 0.25 0.5 0.75 1 1.25 1.5
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-35
-30
-25
-20
-15
-10
-5
0
0 0.25 0.5 0.75 1 1.25 1.5
+25C
+85C
-40C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
0
2
4
6
8
10
0 0.25 0.5 0.75 1 1.25 1.5
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (GHz)
HMC580ST89 / 580ST89E
v04.0710 InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 1 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
8 - 148
Gain, Power & OIP3 vs. Supply Voltage
for Constant Icc = 88 mA @ 850 MHz
P1dB vs. Temperature Psat vs. Temperature
Output IP3 vs. Temperature
Vcc vs. Icc Over Temperature for
Fixed Vs= 5V, RBIAS= 1.8 Ohms
0
2
4
6
8
10
12
14
16
18
20
22
24
26
0 0.3 0.5 0.8 1 1.3 1.5
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
0
4
8
12
16
20
24
28
0 0.25 0.5 0.75 1 1.25 1.5
+25C
+85C
-40C
Psat (dBm)
FREQUENCY (GHz)
20
25
30
35
40
45
0 0.25 0.5 0.75 1 1.25 1.5
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
78
80
82
84
86
88
90
92
94
4.82 4.83 4.84 4.85 4.86 4.87
Icc (mA)
Vcc (V)
+85C
+25C
-40C
ACPR vs. Channel Output Power
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
24681012141618
WCDMA 140MHz
WCDMA 400MHz
CDMA2000 140MHz
CDMA2000 400MHz
ACPR (dBc)
CHANNEL OUTPUT POWER (dBm)
0
4
8
12
16
20
24
28
32
36
4.5 5 5.5
Gain
P1dB
Psat
IP3
GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Vs (V)
HMC580ST89 / 580ST89E
v04.0710 InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 1 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
8 - 149
Outline Drawing
Absolute Maximum Ratings
Collector Bias Voltage (Vcc) +5.5 Vdc
RF Input Power (RFIN)(Vcc = +4.2 Vdc) +10 dBm
Junction Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 9 mW/°C above 85 °C) 0.59 W
Thermal Resistance
(junction to lead) 110 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HMB) Class 1C
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC580ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H580
XXXX
HMC580ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H580
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
HMC580ST89 / 580ST89E
v04.0710 InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 1 GHz
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
8 - 150
Application Circuit
Recommended Component Values for Key Application Frequencies with Vs = +5V
Component
Frequency (MHz)
50 250 400 900
L1 270 nH 110 nH 110 nH 56 nH
C1, C2 0.01 μF 820 pF 820 pF 100 pF
Rbias 0 Ohms 1.5 Ohms 1.5 Ohms 1.8 Ohms
Note:
1. External blocking capacitors are required on
RFIN and RFOUT.
2. RBIAS provides DC bias stability over temperature.
Recommended Bias Resistor Values
for Icc = 88 mA, Rbias = (Vs - Vcc) / Icc, Vs > +5V
Supply Voltage (Vs) 6V 8V
RBIAS VALUE 13 Ω 36 Ω
RBIAS POWER RATING ¼ W ½ W
Pin Descriptions
Pin Number Function Description Interface Schematic
1IN This pin is DC coupled.
An off chip DC blocking capacitor is required.
3 OUT RF output and DC Bias (Vcc) for the output stage.
2, 4 GND These pins and package bottom
must be connected to RF/DC ground.
HMC580ST89 / 580ST89E
v04.0710 InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 1 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
8 - 151
Evaluation PCB
The circuit board used in the  nal application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
List of Materials for Evaluation PCB 116402 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 - J4 DC Pin
C1, C2 Capacitor, 0402 Pkg.
C3 100 pF Capacitor, 0402 Pkg.
C4 1000 pF Capacitor, 0603 Pkg.
C5 2.2 μF Capacitor, Tantalum
R1 Resistor, 1206 Pkg.
L1 Inductor, 0603 Pkg.
U1 HMC580ST89 / HMC580ST89E
PCB [2] 107368 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Evaluation board tuned for 900 MHz operation
HMC580ST89 / 580ST89E
v04.0710 InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 1 GHz