Document 195R-1 Chip Inductors - 0603CS (1608) 100 90 70 Q factor 12 nH 33 nH 80 68 nH 60 120 110 100 3.9 nH 90 80 70 60 50 40 30 25C Typical Q vs Frequency Irms Derating Percent of rated Irms Ultra-small size, exceptional Q and high SRFs make these inductors ideal for high frequency applications where size is at a premium. They also have excellent DCR and current carrying characteristics. 20 10 270 nH 0 50 -40 40 20 40 D F 10 10 100 1000 10000 A Frequency (MHz) 80 100 120 140 A max 400 B max H Pick and place material I G J F I E terminal Typical L vs Frequency Recommended Land Pattern Terminal wraparound: approx 0.007/0,18 both ends C max D ref E F G H I J 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches 270 nH 350 60 C B overall 20 Inductance (nH) 0 Ambient temperature (C) 30 0 -20 120 nH 1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm 300 Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. 250 Core material Ceramic Environmental RoHS compliant without exemption, halogen free Terminations RoHS compliant matte tin over silver-platinum-glass frit. Other terminations available at additional cost. Weight 3.2 - 3.7 mg Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7 reel Paper tape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing PCB washing Only pure water or alcohol recommended 200 120 nH 150 68 nH 100 33 nH 50 0 12 nH 3.9 nH 10 100 1000 Frequency (MHz) 10000 Specificationssales@coilcraft.com subject to change without notice. US +1-847-639-6400 Please check sales@coilcraft-europe.com our website for latest information. UK +44-1236-730595 Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 195R-1 Revised 01/11/12 (c) Coilcraft Inc. 2012 This product may not be used in medical of high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 195R-2 0603CS Series (1608) SRF DCR 900 MHz 1.7 GHzmin5max6 Inductance2 Percent Q Irms7 Color Part number1 (nH) tolerance3 min4 L typ Q typ L typ Q typ (GHz) (Ohms) (mA) dot 0603CS-1N6X_R_ 0603CS-1N8X_R_ 0603CS-2N2X_R_ 0603CS-3N3X_R_ 0603CS-3N6X_R_ 0603CS-3N9X_R_ 0603CS-4N3X_R_ 0603CS-4N7X_R_ 0603CS-5N1X_R_ 0603CS-5N6X_R_ 0603CS-6N8X_R_ 0603CS-7N5X_R_ 0603CS-8N2X_R_ 0603CS-8N7X_R_ 0603CS-9N5X_R_ 0603CS-10NX_R_ 0603CS-11NX_R_ 0603CS-12NX_R_ 0603CS-15NX_R_ 0603CS-16NX_R_ 0603CS-18NX_R_ 0603CS-22NX_R_ 0603CS-23NX_R_ 0603CS-24NX_R_ 0603CS-27NX_R_ 0603CS-30NX_R_ 0603CS-33NX_R_ 0603CS-36NX_R_ 0603CS-39NX_R_ 0603CS-43NX_R_ 0603CS-47NX_R_ 0603CS-51NX_R_ 0603CS-56NX_R_ 0603CS-68NX_R_ 0603CS-72NX_R_ 0603CS-82NX_R_ 0603CS-R10X_R_ 0603CS-R11X_R_ 0603CS-R12X_R_ 0603CS-R15X_R_ 0603CS-R18X_R_ 0603CS-R20X_R_ 0603CS-R21X_R_ 0603CS-R22X_R_ 0603CS-R25X_R_ 0603CS-R27X_R_ 0603CS-R33X_R_ 0603CS-R39X_R_ 1.6 @ 250 MHz 1.8 @ 250 MHz 2.2 @ 250 MHz 3.3 @ 250 MHz 3.6 @ 250 MHz 3.9 @ 250 MHz 4.3 @ 250 MHz 4.7 @ 250 MHz 5.1 @ 250 MHz 5.6 @ 250 MHz 6.8 @ 250 MHz 7.5 @ 250 MHz 8.2 @ 250 MHz 8.7 @ 250 MHz 9.5 @ 250 MHz 10 @ 250 MHz 11 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz 16 @ 250 MHz 18 @ 250 MHz 22 @ 250 MHz 23 @ 250 MHz 24 @ 250 MHz 27 @ 250 MHz 30 @ 250 MHz 33 @ 250 MHz 36 @ 250 MHz 39 @ 250 MHz 43 @ 250 MHz 47 @ 200 MHz 51 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 72 @ 150 MHz 82 @ 150 MHz 100 @ 150 MHz 110 @ 150 MHz 120 @ 150 MHz 150 @ 150 MHz 180 @ 100 MHz 200 @ 100 MHz 210 @ 100 MHz 220 @ 100 MHz 250 @ 100 MHz 270 @ 100 MHz 330 @ 100 MHz 390 @ 100 MHz 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 24 16 13 35 22 22 22 20 20 26 27 28 30 28 28 31 30 35 35 34 35 38 38 36 40 37 40 37 40 38 38 35 38 37 34 34 34 32 32 28 25 25 27 25 25 26 25 25 1.67 1.83 2.22 3.31 3.72 3.95 4.32 4.72 4.93 5.77 6.75 7.70 8.25 8.86 9.7 10.0 11.0 12.3 15.4 16.2 18.7 22.8 24.1 24.5 29.2 31.4 36.0 39.4 42.7 47.0 52.2 55.5 62.5 80.5 82.0 96.2 124 138 166 250 305 -- -- -- -- -- -- -- 1. When ordering, specify tolerance, termination and packaging codes: 0603CS-R39XJRW Tolerance: G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: R = RoHS compliant matte tin over silver-platinumglass frit. Special order: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: W = 7 machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 49 35 31 75 53 49 50 47 47 63 60 60 82 62 59 66 53 72 64 55 70 73 71 45 74 47 67 47 60 44 62 69 56 54 53 54 49 43 39 25 22 -- -- -- -- -- -- -- 1.65 1.86 2.24 3.38 3.71 3.96 4.33 4.75 4.95 6.05 7.10 7.82 8.37 9.32 9.92 10.6 11.5 13.5 16.8 17.3 21.4 26.1 28.0 28.7 34.6 39.9 49.5 52.7 60.2 64.9 77.2 82.2 97.0 168 135 177 -- -- -- -- -- -- -- -- -- -- -- -- 63 50 44 88 65 67 70 57 56 80 81 65 87 58 61 83 56 83 89 52 69 71 67 39 65 28 42 24 40 21 35 34 26 21 20 21 -- -- -- -- -- -- -- -- -- -- -- -- 12.5 12.5 12.5 5.90 5.90 6.90 5.90 5.80 5.70 4.76 5.80 4.80 4.20 4.60 5.40 4.80 4.00 4.00 4.00 3.30 3.10 3.00 2.85 2.65 2.80 2.25 2.30 2.08 2.20 2.00 2.00 1.90 1.90 1.70 1.70 1.70 1.40 1.35 1.30 0.990 0.990 0.900 0.895 0.900 0.822 0.830 0.900 0.780 0.030 0.045 0.250 0.045 0.063 0.080 0.063 0.116 0.140 0.075 0.110 0.106 0.115 0.109 0.135 0.130 0.130 0.130 0.170 0.170 0.170 0.190 0.190 0.190 0.220 0.220 0.220 0.250 0.250 0.280 0.280 0.270 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.920 1.25 1.98 2.06 2.10 3.55 2.16 3.89 4.35 700 700 100 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 600 400 400 400 300 300 280 240 200 200 200 120 170 100 100 Red Black Yellow Blue Red Brown Orange Violet Green Black Red Brown Orange Yellow Blue Orange Gray Yellow Green White Blue Violet Orange Black Gray Brown White Red Black Orange Brown Blue Red Orange Yellow Green Blue Violet Gray White Black Green Gray Brown Violet Red Blue Yellow 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at the same frequency as inductance using an Agilent/ HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15C temperature rise from 25C ambient. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specificationssales@coilcraft.com subject to change without notice. US +1-847-639-6400 Please check sales@coilcraft-europe.com our website for latest information. UK +44-1236-730595 Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 195R-2 Revised 01/11/12 (c) Coilcraft Inc. 2012 This product may not be used in medical of high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.