Encoders/EVQV5/T 27/18 mm Center Space Encoders Type: EVQV5/EVQVT Features Recommended Applications Multiple unit construction (achieved by mounting switches, LEDs, etc.) (center space) on the printed wiring board Good operability and high reliability Car audio products (adjustment of volume, tone, tuners, etc.) AV equipment (control of edit functions of VCRs, CD players, etc.) Explanation of Part Numbers 1 2 3 4 5 Product Code 6 7 8 Type 9 Design No. Rotation Angle Mechanical 12 Output(Pulses) 9 mN*m, 13.5 mN*m, 18 mN*m 18 points, 30 points Output Signal Phase A and B 9 pulses/360 , 15 pulses/360 Resolution Rating 1 mA 10 V DC Contact Resistance 1 max. Chattering 5 ms ma x. 50 m min. (at 250 V DC) Insulation Resistance Dielectric Withstanding Voltage Endurance 11 36 0 (Endless) Rotation Torque (Detents Torque) Detents Electrical 10 30 0 V AC for 1 minute Rotation Life 30,000 cycles min. 80 pcs. (Tray Pack) Minimum Quantity/Packing Unit Quantity/Carton 1,600 pcs. Dimensions in mm (not to scale) 12 7 Mounting surface 15 6 27 .9 22 4-2 2- 2-1.5 3. 4- 2-2.5 15 X' 16.6 28 2-3 7 1 2.5 5 4-4 .5 .6 X 1.5 2-1.5 15 COM Y 27 18.6 General dimension tolerance : 0.5 ( )dimensions are reference dimensions. Y' B 5.5 14 28 3-6 7 3-2.5 4 3-0.5 3-0.3 5 A 3-3 3-6.5 120 21.9 3-0.8 3.5 120 (29.6) Detail of rotation shaft Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.09 industrial.panasonic.com/ww -1- Panasonic Corporation 2017 ANCTB70E 201709-Fd Encoders/EVQV5/T PWB mounting hole for reference Circuit Diagram 28.7 (26.9) 2.5 COM 15 1.5 30 2-4.5 22 2-R0.9 A COM 2-1.8 R0.75 B 2 1.5 B A 7 3-1 (View from mounting side) P.W.B thickness:t=0.16 Tolerance: 0.1 Phase Difference Test Circuit Diagram Detent steady point 5 V DC A signal OFF ON Signal A T1 B signal T2 T3 10 k 10 k 10 k 10 k Term.A Term.B Signal B T4 OFF 0.01 F ON 0.01 F Encoder C.W Phase difference T1, T2, T3, T4 (At rotational speed 60 r/min.) Initial ------- 4m sec. min. After life -----2.5m sec. min. COM Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ww -2- Panasonic Corporation 2017 ANCTB70E 201709-Fd