MINI-BEAM Universal Voltage Series Universal voltage photoelectric sensors with electromechanical relay output MINI-BEAM Universal Voltage Series Features *U.S. Patent no. 4356393 * Popular, compact MINI-BEAM package * Universal supply voltage: 24 to 240V ac, 50/60 Hz; 24 to 240V dc (1.5 watts or 2.5VA maximum) * Easy-to-operate sensors with few necessary adjustments * Light/Dark Operate select switch and 15-turn Gain potentiometer are protected by a gasketed clear acrylic cover * Multiple sensing modes include: Opposed, Retroreflective, Diffuse, Divergent and Convergent, plus Glass and Plastic Fiber Optic models * 3-amp SPDT (Single-Pole-Double-Throw) electromechanical relay output * Exclusive, patented Alignment Indicating Device system (AIDTM*) lights a rearpanel-mounted LED indicator whenever the sensor sees a light condition; superimposed pulse rate indicates received light signal strength * Wide array of mounting options, including 18 mm in-line thread * Integral, unterminated cables 2 m (6.5') or 9 m (30') long available Their small effective beam size is ideal for accuracy-dependent applications, particularly when used with an aperture (see page 10). They have the power to burn through dust and dirt, and may even sense opaque materials through a thin-walled container. Infrared, 880 nm MINI-BEAM Universal Voltage Series Opposed-Mode Emitters (E) and Receivers (R) Models Range Cable* Supply Voltage Output Type Excess Gain Beam Pattern 1000 SMU31E & SMU31R SMU31E SMU31R 3m (10') E: 2-wire 2 m (6.5') R: 5-wire 2 m (6.5') Universal SPDT 24 to 240V dc Electroor mechanical 24 to 240V ac Relay E X C E S S G A I N SMU31E & SMU31R 300 mm Opposed Mode 100 200 mm 4.0 in 0 0 10 100 mm 4.0 in 200 mm 8.0 in 12.0 in 300 mm 0 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft .6 m 2 ft 1.2 m 4 ft 1000 SMU31RL 30 m (100') E: 2-wire 2 m (6.5') R: 5-wire 2 m (6.5') Universal SPDT 24 to 240V dc Electroor mechanical 24 to 240V ac Relay G A I N 1.8 m 6 ft 2.4 m 8 ft 3.0 m 10 ft DISTANCE DISTANCE SMU31EL 8.0 in 100 mm 1 .01 m .033 ft E X C E S S 12.0 in Opposed Mode SMU31EL & SMU31RL SMU31EL & SMU31RL 750 mm Opposed Mode 500 mm 100 30.0 in 20.0 in Opposed Mode 250 mm 10.0 in 0 10 1 .1 m .33 ft 0 250 mm 10.0 in 500 mm 20.0 in 750 mm 30.0 in 0 1.0 m 3.3 ft 10 m 33 ft 100 m 330 ft 6m 20 ft 12 m 40 ft 18 m 60 ft 24 m 80 ft 30 m 100ft DISTANCE DISTANCE *9 m (30') cables are available by adding the suffix "W/30" to the model number of any cabled sensor (e.g., SMU31E W/30). IMPORTANT: SEE SAFETY WARNING ON BACK PAGE Printed in USA P/N 55230L9B MINI-BEAM Universal Voltage Series Non-polarized Excellent for sensing even small items where sensing is possible from one side only. Recommended for relatively clean environments where high excess gain is not required. Polarized P Visible red, 650 nm MINI-BEAM Universal Voltage Series Retroreflective-Mode Sensors Models Range** Supply Voltage Cable* Output Type Excess Gain Non-Polarized SMU315LV 5m (15') 5-wire 2 m (6.5') Beam Pattern 1000 SMU315LV Universal 24 to 240V dc or 24 to 240V ac SPDT Electromechanical Relay E X C E S S SMU315LV 75 mm Retroreflective Mode 100 3.0 in 50 mm 2.0 in Retroreflective Mode 25 mm With BRT-3 Reflector 1.0 in 0 0 25 mm G A I N 10 1.0 in With BRT-3 Reflector 50 mm 2.0 in 75 mm 1 .01 m .033 ft 3.0 in 0 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft 1m 3 ft 2m 6 ft 3m 9 ft 4m 12 ft 5m 15 ft DISTANCE DISTANCE Polarized Extended Range SMU315LP 10 mm to 3m (0.4" to 10') 5-wire 2 m (6.5') Universal 24 to 240V dc or 24 to 240V ac 1000 SMU315LP SPDT Electromechanical Relay E X C E S S G A I N Retroreflective Mode 100 SMU315LP 60 mm 2.4 in Retroreflective Mode 40 mm 1.6 in 20 mm 0.8 in 0 0 20 mm 10 0.8 in 40 mm 1.6 in 60 mm 1 .01 m 0.03 ft 0 0.1 m 0.3 ft 1m 3 ft DISTANCE 10 m 30 ft 2.4 in With BRT-3 Reflector .6 m 2 ft 1.2 m 4 ft 1.8 m 6 ft 2.4 m 8 ft 3.0 m 10 ft DISTANCE * 9 m (30') cables are available by adding suffix "W/30" to the model number of any cabled sensor (e.g., SMU315LV W/30) ** Retroreflective range is specified using one model BRT-3 retroreflector (3" diameter). Actual sensing range may be more or less than specified, depending upon the efficiency and reflective area of the retroreflector(s) used. See page 9 and your current Banner Photoelectric Sensors catalog for more information about retroreflective targets. page 2 Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 MINI-BEAM Universal Voltage Series Infrared, 880 nm D Models These economical single-unit sensors are excellent for sensing objects of adequate size and reflectivity at short range. Divergent models are useful for sensing small items and translucent or transparent materials at close range. W Models MINI-BEAM Universal Voltage Series Diffuse-Mode Sensors Models Range Supply Voltage Cable* Output Type Excess Gain Beam Pattern Performance based on 90% reflectance white test card 1000 SMU315D SMU315D 380 mm (15") 5-wire 2 m (6.5') Universal 24 to 240V dc or 24 to 240V ac E X C E S S SPDT Electromechanical Relay G A I N Diffuse Mode 100 SMU315D 15 mm 0.6 in Diffuse Mode 10 mm 0.4 in 5 mm 0.2 in 0 10 0 5 mm 0.2 in 10 mm 0.4 in 15 mm 1 1 mm .04 in 10 mm .4 in 100 mm 4 in 0.6 in 0 1000 mm 40 in 75 mm 150 mm 225 mm 300 mm 375 mm 3.0 in 6.0 in 9.0 in 12.0 in 15.0 in DISTANCE DISTANCE Divergent Diffuse SMU315W 130 mm (5") 5-wire 2 m (6.5') 1000 SMU315W Universal 24 to 240V dc or 24 to 240V ac E X C E S S SPDT Electromechanical Relay Diffuse Mode 100 SMU315W 22.5 mm 0.9 in Diffuse Mode 15.0 mm 0.6 in 7.5 mm 0.3 in 0 G A I N 10 0 7.5 mm 0.3 in 15.0 mm 0.6 in 22.5 mm 1 1 mm .04 in 10 mm .4 in 100 mm 4 in 0.9 in 0 1000 mm 40 in 25 mm 1.0 in 50 mm 2.0 in DISTANCE DISTANCE Visible red, 650 nm 75 mm 100 mm 125 mm 3.0 in 4.0 in 5.0 in Convergent-mode sensors feature high excess gain and can detect objects with low reflectivity. They are a good choice for counting adjacent radiused objects and for accurate position sensing. MINI-BEAM Universal Voltage Series Convergent-Mode Sensors Models Focus Cable* Supply Voltage Output Type Excess Gain Performance based on 90% reflectance white test card Visible Red 650 nm 16 mm (0.65") SMU315CV Spot Size at Focus: 1.3 mm (0.05") Universal 24 to 240V dc 5-wire 2 m (6.5') or 24 to 240V ac Beam Pattern 1000 SMU315CV SPDT Electromechanical Relay E X C E S S G A I N Convergent Mode 100 SMU315CV 3.0 mm 0.12 in Convergent Mode 2.0 mm 0.08 in 1.0 mm 0.04 in 0 0 10 1.0 mm 0.04 in 2.0 mm 0.08 in 0.12 in 3.0 mm 1 1 mm .04 in 0 10 mm .4 in 100 mm 4 in 1000 mm 40 in 7.5 mm 0.3 in 15 mm 22.5 mm 30 mm 37.5 mm 0.6 in 0.9 in 1.2 in 1.5 in DISTANCE DISTANCE 1000 SMU315CV2 43 mm (1.7") SMU315CV2 Spot Size at Focus: 3.0 mm (0.12") Universal 24 to 240V dc 5-wire 2 m (6.5') or 24 to 240V ac SPDT Electromechanical Relay E X C E S S G A I N Convergent Mode 100 SMU315CV2 3.0 mm 0.12 in Convergent Mode 2.0 mm 0.08 in 1.0 mm 0.04 in 0 10 0 1.0 mm 0.04 in 2.0 mm 0.08 in 3.0 mm 1 1 mm .04 in 10 mm .4 in 100 mm 4 in 1000 mm 40 in 0.12 in 0 25 mm 1 in 50 mm 2 in DISTANCE 75 mm 100 mm 125 mm 3 in 4 in 5 in DISTANCE * 9 m (30') cables are available by adding suffix "W/30" to the model number of any cabled sensor (e.g., SMU315CV W/30) Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 page 3 MINI-BEAM Universal Voltage Series An excellent option for sensing in tight or inaccessible areas. Fibers withstand vibration and shock; are immune to electrical noise. Glass fibers withstand high temperatures, extreme moisture and corrosive materials. Not recommended for applications requiring bending or repeated flexing of fibers (see plastic fiber models). Infrared, 880 nm Visible red, 650 nm MINI-BEAM Universal Voltage Series Glass Fiber Optic Sensors Models Range Cable* Supply Voltage Output Type Excess Gain Beam Pattern Diffuse mode performance based on 90% reflectance white test card OPPOSED MODE - INDIVIDUAL FIBERS Infrared 880 nm 1000 E X C E S S SMU315F Range varies by sensing mode and fiber optics used G A I N SMU315F 5-wire 2 m (6.5') SPDT Electromechanical Relay 3 in Opposed Mode 50 mm 2 in 25 mm IT23S Fibers w/L9 lenses IT13S Fibers 1 in 0 10 1 .01 m .033 ft Universal 24 to 240V dc or 24 to 240V ac SMU315F 75 mm Opposed Mode Glass Fibers 100 IT23S Fibers IT13S 1m 3.3 ft 0 25 mm 1 in 50 mm 2 in 75 mm 3 in 0 .1 m .33 ft IT23S 10 m 33 ft 100 mm 200 mm 300 mm 400 mm 500 mm 4 in 8 in 12 in 16 in 20 in DISTANCE DISTANCE DIFFUSE MODE - BIFURCATED FIBERS 1000 SMU315F E X C E S S G A I N 1.9 mm Diffuse Mode Glass Fibers 100 0.075 in SMU315F 1.3 mm 0.050 in Diffuse Mode 0.025 in 0.65 mm 0 BT23S Fiber 10 0 BT23S 0.65 mm 0.025 in 1.3 mm 0.050 in 0.075 in 1.9 mm BT13S Fiber 1 1 mm .04 in BT13S 0 10 mm .4 in 100 mm 4 in 1000 mm 40 in 7.5 mm 0.3 in 15 mm 22.5 mm 30 mm 37.5 mm 0.6 in 0.9 in 1.2 in 1.5 in DISTANCE DISTANCE OPPOSED MODE - INDIVIDUAL FIBERS Visible Red 650 nm 1000 E X C E S S SMU315FV Range varies by sensing mode and fiber optics used G A I N SMU315FV 100 5-wire 2 m (6.5') SPDT Electromechanical Relay 3 in Opposed Mode 50 mm 2 in 25 mm IT23S Fiber 10 IT13S Fiber 1 in 0 IT13S 0 IT23S 25 mm 1 in 50 mm 2 in 75 mm 1 1 mm .04 in Universal 24 to 240V dc or 24 to 240V ac SMU315FV 75 mm Opposed Mode 3 in 0 10 mm .40 in 100 mm 4.0 in 1000 mm 40 in 50 mm 100 mm 150 mm 200 mm 250 mm 2 in 4 in 6 in 8 in 10 in DISTANCE DISTANCE DIFFUSE MODE - BIFURCATED FIBERS 1000 SMU315FV E X C E S S G A I N SMU315FV 1.95 mm Diffuse Mode 100 0.075 in Diffuse Mode 0.050 in 1.30 mm 0.025 in 0.65 mm 0 10 BT23S Fiber 1 mm .04 in 0 BT23S 0.65 mm 0.025 in 1.30mm 0.050 in 0.075 in 1.95 mm BT13S Fiber 1 .1 mm .004 in BT13S 10 mm .40 in 100 mm 4 in 0 5 mm 0.2 in 10 mm 0.4 in DISTANCE 15 mm 0.6 in 20 mm 0.8 in 25 mm 1.0 in DISTANCE * 9 m (30') cables are available by adding suffix "W/30" to the model number of any cabled sensor (e.g., SMU315FV W/30) page 4 Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 MINI-BEAM Universal Voltage Series An excellent option for sensing in tight or inaccessible areas. Fibers withstand vibration and shock; are immune to electrical noise. Plastic fibers function well at temperatures between -30 and +70C (-20 to +158F), and stand up to repeated flexing. Most are easy to shorten in the field, for custom installations. Not recommended for severe environments (see glass fiber models). Visible red, 650 nm MINI-BEAM Universal Voltage Series Plastic Fiber Optic Sensors Models Range Cable* Supply Voltage Output Type Excess Gain Beam Pattern Diffuse mode performance based on 90% reflectance white test card OPPOSED MODE - INDIVIDUAL FIBERS Visible Red 650 nm 1000 SMU315FP E X C E S S SMU315FP Range varies by sensing mode and fiber optics used 5-wire 2 m (6.5') SPDT Electromechanical Relay 30 mm 1.2 in 15 mm 0.6 in 0 10 PIT26U Fiber PIT46U PIT26U 0.6 in 30 mm 1.2 in 1.8 in 0 10 mm .40 in 100 mm 4.0 in 0 15 mm 45 mm 1 1 mm .04 in Universal 24 to 240V dc or 24 to 240V ac 1.8 in Opposed Mode PIT46U Fiber G A I N SMU315FP 45 mm Opposed Mode Plastic Fibers 100 1000 mm 40 in 25 mm 1 in 50 mm 2 in 75 mm 100 mm 125 mm 3 in 4 in 5 in DISTANCE DISTANCE DIFFUSE MODE - BIFURCATED FIBERS 1000 SMU315FP E X C E S S G A I N SMU315FP 3.8 mm Diffuse Mode Plastic Fibers 100 0.15 in Diffuse Mode 2.5 mm 0.10 in 1.2 mm PBT46U Fiber 10 0.05 in 0 PBT46U PBT26U 0 1.2 mm 0.05 in 2.5 mm 0.10 in 3.8 mm 0.15 in PBT26U Fiber 1 .1 mm .004 in 0 1 mm .04 in 10 mm .4 in 100 mm 4 in 7.5 mm 0.3 in 15 mm 22.5 mm 30 mm 37.5 mm 0.6 in 0.9 in 1.2 in 1.5 in DISTANCE DISTANCE * 9 m (30') cables are available by adding suffix "W/30" to the model number of any cabled sensor (e.g., SMU315FP W/30) Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 page 5 MINI-BEAM Universal Voltage Series MINI-BEAM Universal Voltage Series Specifications Supply Voltage and Current Universal voltage: 24 to 240V ac, 50/60Hz or 24 to 240V dc (1.5 watts or 2.5 VA maximum) Supply Protection Circuitry Protected against transient voltages. DC hookup is without regard to polarity. Output Configuration SPDT (Single-Pole, Double Throw) (form C) electromechanical relay, ON/OFF output. Output Rating Maximum switching power (resistive load): 90W, 250VA Maximum switching voltage (resistive load): 250V ac or 30V dc Maximum switching current (resistive load): 3A Minimum voltage and current: 5V dc, 10 mA Mechanical life: 20,000,000 operations Electrical life at full resistive load: 100,000 operations Output Protection Circuitry Protected against false pulse on power-up. Output Response Time Closure time: 20 milliseconds max. Release time: 20 milliseconds max. Maximum switching speed: 25 operations per second Repeatability All sensing modes: 1 millisecond Adjustments Light/Dark Operate select switch, and 15-turn slotted brass screw Gain (sensitivity) adjustment potentiometer (clutched at both ends of travel). Both controls are located on rear panel of sensor and are protected by a gasketed, clear acrylic cover. Indicators Exclusive, patented Alignment Indicator Device system (AIDTM, US patent #4356393) lights a rear-panelmounted LED indicator whenever the sensor sees a "light" condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate). Construction Reinforced thermoplastic polyester housing, totally encapsulated, o-ring seal, acrylic lenses, and stainless steel screws. Environmental Rating Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12, and 13; IEC IP67. Connections PVC-jacketed 5-conductor (2-conductor for emitters) 2 m (6.5') or 9 m (30') unterminated cable. Operating Conditions Temperature: -20 to +55C (-4 to +131F) Maximum relative humidity: 90% at 50C (non-condensing) Application Notes Install transient suppressor (MOV) across contacts switching inductive loads. page 6 Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 MINI-BEAM Universal Voltage Series MINI-BEAM Universal Voltage Series Dimensions Opposed, Retroreflective, Diffuse, and Convergent Modes (models with suffix E, EL, R, RL, LP, LV, D, CV, CV2) 3.2 mm (0.13") Divergent Diffuse Mode (models with suffix W) 12.2 mm (0.48") 30.7 mm (1.21") o 3 mm (o0.11") Clearance (2) 24.1 mm (0.95") Bezel M18 x 1 x 15 mm Thread (Mounting Nut Supplied) 2 m (6.5') Cable 2 m (6.5') Cable 18.0 mm (0.71") Mounting Peg o 6.3 mm x 2.5 mm (o 0.25" x 0.10") 19.1 mm (0.75") 66.8 mm (2.63") 81.0 mm (3.19") 13.2 mm (0.52") 27.4 mm (1.08") Glass Fiber Optic (models with suffix F and FV) Plastic Fiber Optic (models with suffix FP) Fiber Optic Fitting 2 m (6.5') Cable 2 m (6.5') Cable Fiber Optic Fitting 85.3 mm (3.36") 69.8mm (2.75") 31.2 mm (1.23") 16.5 mm (0.65") MINI-BEAM Universal Voltage Series Hookups All Models Except Emitters Emitters bn bu *Supply Voltage 24-240V ac/dc wh NC ye bk C bn *Supply Voltage 24-240V ac/dc bu NO *Connection of dc power is without regard to polarity NOTE: Install transient suppressor (MOV) across contacts switching inductive loads. Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 page 7 MINI-BEAM Universal Voltage Series Using the MINI-BEAM Universal Voltage Sensor Installation and Alignment Proper operation of these sensors requires that they be mounted securely and aligned properly. Excessive sensor movement or vibration (or movement or vibration of the fiber tips, in the case of fiber-optic sensors) can result in loss of alignment to the target object, eventually leading to intermittent or false operation. Banner offers a complete selection of mounting brackets (see page 9-10); contact the factory for additional mounting suggestions. Normal Operation MINI-BEAM Universal Voltage sensors (except opposed-mode emitters) have two adjustments: Gain and Light/Dark Operate, plus a Signal Strength indicator LED on the back of the sensor, protected behind a clear acrylic cover (see Figure 1). Gain To increase Gain, turn the 15-turn potentiometer clockwise. It is clutched at both ends of travel to avoid damage. A "clicking" sound may be heard and/or felt when attempting to adjust beyond either limit. Signal Strength Indicator LED The Signal Strength indicator is Banner's exclusive, patented AID (Alignment Indicating Device). Its pulse rate increases as the received light signal strength increases. This simplifies accurate alignment and gives a relative indication of sensing contrast. Figure 1. MINI-BEAM Universal Voltage Series indicators Light/Dark Operate Select In Light Operate mode, the sensor output relay energizes when the lighter of the two conditions is present; in Dark Operate mode, the relay energizes when the darker of the two conditions is present. To select Light Operate, insert a small screwdriver into the slot on the select switch and turn it fully clockwise, until the tabs on the control touch the stop; to select Dark Operate, turn the select switch fully counterclockwise, until the tabs touch the opposite side of the stop. NOTE: Take care when turning the Light/Dark Operate select switch, that the small tabs on the switch do not become damaged. Troubleshooting MINI-BEAM Universal Voltage Series sensors have no field-serviceable parts, other than replaceable lenses (see page 9). page 8 Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 MINI-BEAM Universal Voltage Series Accessories Retroreflective Targets Banner offers a wide selection of high-quality retroreflective targets. See the Accessories section of your current Banner Photoelectric Sensors catalog for complete information. NOTE: Polarized sensors require corner cube type retroreflective targets only. Replacement Lens Assemblies MINI-BEAM lens assemblies are field-replaceable. In addition, some lenses may be used to convert from one sensing mode to another, or to change the sensing range of a particular sensor. The possible conversions are listed in the table below. Model UC-300BZ UC-300C.7 UC-300C2 UC-300E UC-300EL UC-300F UC-300FP UC-300FP2 UC-300L UC-300LP Description Replacement lens for W Replacement lens for CV Replacement lens for CV2 Replacement lens for E and R Replacement lens for EL and RL Replacement lens for F and FV Replacement lens for FP (old style) Replacement lens for FP (current style) Replacement lens for LV and D Replacement lens for LP Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 Possible Sensing Mode or Range Changes -- Change CV2 to CV Change CV to CV2 -- Extend range of E and R Change D to F -- -- Change F to D -- page 9 MINI-BEAM Universal Voltage Series Apertures Opposed-mode MINI-BEAM sensors may be fitted with apertures which narrow or shape the effective beam of the sensor to more closely match the size or profile of the object to be sensed, for example, the use of "line" (or "slit") apertures for sensing wire or thread. Each model contains 20 apertures. Model Description AP31-020 AP31-040 AP31-100 0.5 mm (0.02") diameter, circular 1.0 mm (0.04") diameter, circular 2.5 mm (0.10") diameter, circular AP31-020H AP31-040H AP31-100H AP31-200H 0.5 x 6.4 mm (0.02" x 0.25"), horizontal slotted 1.0 x 6.4 mm (0.04" x 0.25"), horizontal slotted 2.5 x 6.4 mm (0.10" x 0.25"), horizontal slotted 5.1 x 6.4 mm (0.20" x 0.25"), horizontal slotted AP31-020V AP31-040V AP31-100V AP31-200V 0.5 x 12.7 mm (0.02" x 0.50"), vertical slotted 1.0 x 12.7 mm (0.04" x 0.50"), vertical slotted 2.5 x 12.7 mm (0.10" x 0.50"), vertical slotted 5.1 x 12.7 mm (0.20" x 0.50"), vertical slotted AP31-DVHX2 Kit containing two of each aperture Range of MINI-BEAM Opposed-Mode Sensor Pairs when Used with Apertures RANGE Standard Group I and II Sensor Pairs Emitter & Receiver Receiver Only Both Apertured Apertured Definitions GROUP I Emitter/ Receiver Pairs (see RANGE columns at right): SMU31E/SMU31R GROUP II Emitter/ Receiver Pairs (see RANGE columns at right): SMU31EL/SMU31RL Example: The MINI-BEAM SMU1E/ SMU31R sensor pair is in Group I. With an AP31-040 circular aperture on the receiver only, range is 940 mm (37"). With AP31-040 apertures on both emitter and receiver, range is 330 mm (13"). Group I range with AP31-040 apertures and UC-300EL upper covers on both units is 483 mm (19"); range with receiver aperture only is 2.0 m (80"). page 10 Aperture(s) Used RANGE Group I Sensor Pairs with UC-300EL Upper Covers Substituted Emitter & Receiver Receiver Only Both Apertured Apertured Group I Sensors Group II Sensors Group I Sensors Group II Sensors AP31-020 89 mm (3.5") 102 mm (4.0") 457 mm (18") 1.5 m (60") 127 mm (5.0") 914 mm (36") AP31-040 330 mm (13 ") 457 mm (18") 940 mm (37") 3.2 m (10.5') 483 mm (19") 2.0 m (80") AP31-100 1.5 m (60") 3.0 m (10') 2.5 m (100") 8.2 m (27') 2.1 m (84") 5.8 m (19') AP31-020H 406 mm (16") 1.8 m (70") 965 mm (38") 9.1 m (30') 864 mm (34") 3.4 m (11') AP31-040H 914 mm (36") 4.0 m (13') 1.8 m (72") 12.5 m (41') 1.8 m (72") 5.2 m (17') AP31-100H 2.3 m (90") 10.4 m (34') 2.9 m (114") 20.7 m (68') 5.2 m (17') 8.5 m (28') AP31-200H 2.8 m (110") 21.3 m (70') 3.0 m (120") 24.4 m (80') 8.2 m (27') 11.0 m (36') AP31-020V 457 mm (18") 1.7 m (65") 1.0 m (40") 8.2 m (27') 1.0 m (40") 3.4 m (11') AP31-040V 1.0 m (40") 5.5 m (18') 1.8 m (70") 15.8 m (52') 2.1 m (84") 5.5 m (18') AP31-100V 2.3 m (90") 10.7 m (35') 2.9 m (114") 22.9 m (75') 6.1 m (20') 8.5 m (28') AP31-200V 2.8 m (110") 22.9 m (75') 3.0 m (120") 25.9 m (85') 8.5 mm (28') 11.0 m (36') Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 MINI-BEAM Universal Voltage Series MINI-BEAM Mounting Brackets SMB312S * Stainless steel 2-axis, side mounting bracket SMB312PD R 24.1 mm (0.95") R 5.1 mm (0.20") * Stainless steel 18 mm barrel mounting bracket 15 (2) CL 31.8 mm (1.25") 15 (2) CL 31.8 mm (1.25") 20 20 o 3.05 mm Slot (0.120") o 3.05 mm (0.120") R 24.1 mm (0.95") R 5.1 mm (0.20") R 3.1 mm (0.12") (2) 20.1 mm (0.79") 90 o 4.6 mm Slot (0.18 in) R 3.1 mm (0.12") (2) o 4.6 mm (0.18") 4.32 mm (0.170") Slot (2) 15.2 mm (0.60") 40.6 mm (1.60") 90 10 (TYP) 2.5 mm (0.10") 45.5 mm (1.79") 20.3 mm (0.80") * Stainless steel 2-axis, bottom mounting bracket SMB312B * Includes mounting foot 2.5 mm (0.10") 90 10 (2) 9.1 mm (0.36") 10 (2) 2.5 mm (0.10") 3.1 mm Slot (2) (0.12") * "L" bracket SMB46L 4.3 mm Slot (2) (0.17") * 14 ga 316 stainless steel CL 6 mm (0.2") 15 mm (0.6") 24.1 mm (0.95") 6 mm (0.2") 5 mm (0.2") (2x) o36 mm (1.4") o6.5 mm (0.26") (6x) 8 mm (0.3") 16 mm (0.6") 8.6 mm (2) (0.34") 17.3 mm (2) 18.42 mm (0.725") 45.5 mm (1.79") o 6.9 mm (0.27") (0.68") 65 mm (2.6") 23.4 mm 11.4 mm (0.92") (0.45") 35.0 mm (2) (1.38") 50.8 mm (2.00") * "S" bracket SMB46S CL 6 mm (0.2") 5 mm (0.2") (4x) 17 mm (0.7") 17 mm (0.7") 3.5 mm (0.14") 15 mm (0.6") CL 13 mm (0.5") o 36 mm (1.4") o 6.5 mm (0.26") (6x) 8 mm (0.3") * 14 ga 316 stainless steel 34 mm (1.3") 34 mm (1.3") 6 mm (0.2") 27 mm (1.1") * "U" bracket SMB46U * 14 ga 316 stainless steel 10 mm (0.4") 2 mm (.1") 54 mm (2.1") 3.5 mm (0.14") 6 mm (0.2") 16 mm (0.6") 6 mm (0.2") 5 mm (0.2") (4x) 15 mm (0.6") 8 mm (0.3") 16 mm (0.6") o 36 mm (1.4") o 6.5 mm (0.26") (6x) 16 mm (0.6") 65 mm (2.6") 65 mm (2.6") 54 mm (2.1") 2 mm (.1") 27 mm (1.1") 16 mm (0.6") 54 mm (2.1") Banner Engineering Corp. * Minneapolis, U.S.A. Website: http://www.baneng.com * Tel: 888.373.6767 2 mm (.1") 27 mm (1.1") 70 mm (2.8") page 11 MINI-BEAM Universal Voltage Series MINI-BEAM Mounting Brackets * 18 mm split clamp black thermoplastic polyester SMB18C * Stainless steel mounting hardware included * 18 mm swivel, black thermoplastic polyester * Stainless steel mounting hardware included SMB18SF * Not for use with FP Models * Not for use with FP Models 40.0 mm (1.60") 36.0 mm (1.42") 13 mm (0.5") 10.6 mm (0.42") o15.0 mm (0.59") 42.4 mm (1.67") 42.0 mm (1.65") 21.1 mm (0.83") 14.0 mm (0.55") Nut Plate 30.0 mm (1.18") SMB3018SC 2.5 mm (0.10") * Black thermoplastic polyester 66.5 mm (2.62") 50.8 mm (2.00") SMB3018SUS * Side mount swivel bracket - extended range of motion * Black thermoplastic polyester 50.8 mm (2.00") M18 x 1 internal thread 66.5 mm (2.62") 56.7 mm (2.31") Assembled 68.0 mm (2.68") 25.4 mm (1.00") M5 x 0.8 x 60 mm Screw (2) * 18 mm swivel barrel or side mount 50.8 mm (2.00") 22.9 mm (0.9") 56.7 mm (2.31") Assembled 29.0 mm (1.14") 68.0 mm (2.68") 2 x Hole for #6 Machine Screw 29.0 mm (1.14") WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. ! WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 * Phone: 888.373.6767 * http:\\www.baneng.com * Email: sensors@baneng.com