Size R Size R/2 Size R/3 Reversed style, acc. to DIN 41 612/IEC 60603-2 Reversed style, short version of size R Reversed style, third-length of size R Dimensional drawings Male connector 266 Catalog E 074484 04/04 Edition 6 www.erni.com Ordering informations Male connectors Contact supporting press-in tool DIN 41612 414690 414691 004993 023419 414687 414688 023422 023423 593413 593414 004480 433780 593410 593411 004502 023424 Other versions on request. Catalog E 074484 06/06 0,8 mm early make/last break contacts are possible at all positions. Edition 6 www.erni.com 267 Ordering informations Male connectors with transfer-zone Contact supporting press-in tool 414702 414703 023425 023426 414699 414700 023427 023428 1) Terminals nickel-plated over full length. Transfer-zone (5.0 mm) hard gold-plated. 0,8 mm early make/last break contacts are possible at all positions. Other versions on request. 268 Catalog E 074484 04/04 Edition 6 www.erni.com Application example DIN 41612 In order to avoid any incorrect connections being made which could lead to the damage of sensitive electronic equipment due to overload, provisions are available for coding the connector halves. Connector sizes B/2, B/3, C/2, C/3, M and the inverse versions are provided with this integral coding. Catalog E 074484 06/06 Edition 6 The integral coding is accomplished by breaking off (with pliers) the coding tab positions on the male connector. Coding slots are made on the corresponding locations as well on the female connector. For information on coding systems, please contact the local ERNI sales office. www.erni.com 269