266 Catalog E 074484 04/04 Edition 6 www.erni.com
Size R
Size R/2
Size R/3
Reversed style, acc. to DIN 41 612/IEC 60603-2
Reversed style, short version of size R
Reversed style, third-length of size R
Dimensional drawings
Male connector
Catalog E 074484 06/06 Edition 6 www.erni.com 267
DIN 41612
Ordering informations
Male connectors Contact supporting press-in tool
Other versions on request.
004993 023419
023422 023423
004480 433780
004502 023424
0,8 mm early make/last break contacts
are possible at all positions.
414691414690
414688414687
593411593410
593414593413
268 Catalog E 074484 04/04 Edition 6 www.erni.com
Ordering informations
Male connectors with transfer-zone Contact supporting press-in tool
023425 023426
023427 023428
1) Terminals nickel-plated over full length.
Transfer-zone (5.0 mm) hard gold-plated.
Other versions on request. 0,8 mm early make/last break contacts
are possible at all positions.
414700414699
414703414702
Catalog E 074484 06/06 Edition 6 www.erni.com 269
DIN 41612
Application example
In order to avoid any incorrect connections being made which
could lead to the damage of sensitive electronic equipment
due to overload, provisions are available for coding the
connector halves.
Connector sizes B/2, B/3, C/2, C/3, M and the inverse
versions are provided with this integral coding.
The integral coding is accomplished by breaking off (with
pliers) the coding tab positions on the male connector.
Coding slots are made on the corresponding locations as well
on the female connector.
For information on coding systems, please contact the local
ERNI sales office.