A242510 - CRYDOM - Datasheet.Live

DataSheet

Panel Mount

OUTPUT SPECIFICATIONS (1)

125A110A90A75A50A25A10ADescription

Operating Voltage (47-440Hz) [Vrms] (2) 24-280 24-280 24-280 24-280 24-280 24-280 24-280

Transient Overvoltage [Vpk] 600 600 600 600 600 600 600

Maximum Off-State Leakage Current @ Rated Voltage [mArms] (3) 1 1 1 1 1 1 1

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500 500 500

Maximum Load Current [Arms] (4) 10 25 50 75 90 110 125

Minimum Load Current [mArms] 150 150 150 150 150 250 250

Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 115/120 239/250 597/625 954/1000 1145/1200 1432/1500 1670/1750

Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15 1.15 1.15 1.15

Thermal Resistance Junction to Case (Rjc) [°C/W] 1.03 0.8 0.45 0.3 0.27 0.25 0.22

Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 66/60 285/259 1770/1621 4555/4150 6560/5976 10249/9338 13950/12709

Minimum Power Factor (at Maximum load) 0.5 0.5 0.5 0.5 0.5 0.5 0.5

AVAILABLE OPTIONS

Control Voltage

A: 90-280 VAC

D: 3-32 VDC

AxxxxE: 18-36 VAC

Rated Load Current

10: 10 Amps

25: 25 Amps

50: 50 Amps

75: 75 Amps

90: 90 Amps

110: 110 Amps

125: 125 Amps

Operating

Voltage

24: 24-280 VAC

Output Frecuency

Blank: 47-440 Hz

4: 400 Hz

Overvoltage Protection

Blank: Not Included

P: Included (8)

Input Status LED

Blank: Not Included

G: Included

Termination

Blank: Screw

F: Quick Connect (7)

K: Installed standoffs (14)

10 EA4 P G

Thermal Pad

Blank: Not Included

H: Included

24 K H

Snubber

Blank: Not Included

S: Included

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On (9)

-10

Series 1 240 VAC

• Ratings from 10A to 125A @ 24-280 VAC

• SCR output for heavy industrial loads

• Zero turn-on or instantaneous turn-on outputs

• UL/CSA/VDE Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

• AC or DC control

• Direct bond copper substrate

• EMC compliant to Level 3

• Direct power lead frame

• Epoxy free design

PRODUCT SELECTION

Control Voltage 10A 25A 50A 75A 90A 110A 125A

3-32 VDC D2410 D2425 D2450 D2475 D2490 D24110 D24125

90-280 VAC A2410 A2425 A2450 A2475 A2490 A24110 A24125

18-36 VAC A2410E A2425E A2450E A2475E A2490E A24110E A24125E

Do not forget to visit us at: www.crydom.com

Required for valid part number

For options only and not required for valid part number

Not all part number combinations are available.

Contact Crydom Technical support for information on

the availability of a specific part number.

DataSheet

Panel Mount

INPUT SPECIFICATIONS (1)

Description D24xx A24xx A24xxE

Control Voltage Range 3-32 VDC 90-280 Vrms 18-36 Vrms

Maximum Reverse Voltage -32 - -

Minimum Turn-On Voltage 3.0 VDC (5) 90 Vrms 18 Vrms

Minimum Turn-Off Voltage 1.0 VDC 10 Vrms 4 Vrms

Minimum Input Current [mA] 7 5 16

Maximum Input Current [mA] 12 10 20

Nominal Input Impedance [Ohms] Current Regulated

Maximum Turn-On Time [msec] 1/2 Cycle (6) 20 20

Maximum Turn-Off Time [msec] 1/2 Cycle 30 30

GENERAL SPECIFICATIONS (1)

Description Parameters

Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms

Minimum Insulation Resistance (@ 500 VDC) 109 Ohm

Maximum Capacitance, Input/Output 8 pF

Ambient Operating Temperature Range -40 to 80 °C

Ambient Storage Temperature Range -40 to 125 °C

Weight (typical) 2.6 oz (74.9g)

Housing Material 94 V-0

Baseplate Material Aluminum

Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7

Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2.0-2.2

SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2.0-2.2

Humidity 85% non-condensing

LED Input Status Indicator w/”G” option (green)

WIRING DIAGRAM

SOLID STATE RELA Y

OUTPUT

INPUT

Load (13)

4 (– / )3 (+ / )

1 ( ) 2 ( )

Recommended Wire Sizes

Terminals Wire Size

(Solid / Stranded)

Wire Pull-Out

Strength (lbs)[N]

Input

Output

24 AWG (0.2 mm2) / 0.2 [minimum]

2 x 12 AWG (3.3 mm2) / 3.3 [maximum]

20 AWG (0.5 mm2) / 0.518 [minimum]

2 x 10 AWG (5.3 mm2) / 5.3

2 x 8 AWG (8.4 mm2) / 8.4 [maximum]

10 [44.5]

90 [400]

30 [133]

110 [490]

90 [400]

Input Current vs Input Voltage

Standard Regulated “DC” Inputs

Input Current (mA)

0 5 10 15 20 25 30

DC Input Voltage

EQUIVALENT CIRCUIT BLOCK DIAGRAMS

Trigger

Circuit

Current

Limiter

AC/DC

Converter

(10)

(11)

(12)

Diagram: Series 1 AC control

+DC

Trigger

Circuit

Current

Limiter

(10) (11)

(12)

Diagram: Series 1 DC control

Do not forget to visit us at: www.crydom.com

Input/Load Terminal Screw Torque Range (in-lbs/Nm) (14) w/”K” option 8-10 / 0.9-1.13

DataSheet

Panel Mount

MECHANICAL SPECIFICATIONS (1)

Screw Termination

1OUTPUT 2

SOLID STATE RELA Y

4INPUT 3

1.1

[27.9]

0.49

[12.4]

Mounting

Hole/Slot

0.18 [4.5]

DIA.

0.89

[22.6]

1.88

[47.6]

1.7

[43.2]

2.25

[57.3]

1.0

[25.4]

1.75

[44.5]

Mounting

Hole/Slot

r 0.09 [2.2] 0.92

[23.3]

Round Standoff Termination (“K” Option)

1OUTPUT 2

SOLID STATE RELA Y

4INPUT 3

1.1

[27.9]

0.49

[12.4]

Mounting

Hole/Slot

0.18 [4.5]

DIA.

1.10

[27.9]

1.88

[47.6]

1.7

[43.2]

2.25

[57.3]

1.0

[25.4]

1.75

[44.5]

Mounting

Hole/Slot

r 0.09 [2.2] 0.93

[23.6]

Quick Connect Termination (“F” Option) - Up to 25 Amp (7)

1OUTPUT 2

SOLID STATE RELA Y

4INPUT 3

Mounting

Hole/Slot

0.18 [4.5]

DIA.

1.1

[27.9]

0.49

[12.4]

8-32 Output Screw

(2 places)

Faston Terminal

0.25 x 0.032 (2 places)

1.31

[33.4]

1.88

[47.6]

1.7

[43.2]

2.25

[57.3]

Mounting

Hole/Slot

r 0.09 [2.2]

1.0

[25.4]

1.75

[44.5]

6-32 Input Screw

(2 places)

Faston Terminal

0.187 x 0.032 (2 places)

0.89

[22.6]

1.25

[31.8]

Quick Connect Termination (“F” Option) - Up to 50 Amp (7)

SOLID STATE RELA Y

OUTPUT

INPUT

Mounting

Hole/Slot

0.18 [4.5]

DIA.

1.1

[27.9]

0.49

[12.4]

8-32 Output Screw

(2 places)

Faston Terminal

0.25 x 0.032 (4 places)

1.31

[33.4]

1.88

[47.6]

1.7

[43.2]

2.25

[57.3]

Mounting

Hole/Slot

r 0.09 [2.2]

1.0

[25.4]

1.75

[44.5]

6-32 Input Screw

(2 places)

Faston Terminal

0.187 x 0.032 (2 places)

0.89

[22.6]

1.25

[31.8]

GENERAL NOTES

(1) All parameters at 25°C unless otherwise speciﬁed.

(2) For “S” option, operating voltage frequency is 47-63Hz.

(3) For parts with option “S” maximum leakage current is 10mA.

(4) Heat sinking required, see derating curves.

(5) Increase minimum voltage by 1V for operations from -20 to -40°C.

(6) Turn-on time for Instantaneous turn-on versions is 0.02 msec (DC Control Models).

(7) Single pair (up to 25A) Double pair* (50A model only). *Caution: User must connect to both pairs.

(8) Output will self trigger between 450-600Vpk, not suitable for capacitive loads.

(9) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.

(10) Elective Input Status LED, “G” option.

(11) Elective Overvoltage Protection, “P” option.

(12) Elective Internal Snubber, “S” option.

(13) Load can be wired to either SSR output terminal 1 or 2.

Do not forget to visit us at: www.crydom.com

Tolerances: ±0.020in/0.5mm

All dimensions are in: Inches (milimeters)

(14)

(14) Option “K” is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed circuit board (PCB minimum thickness is 0.031 in)

For additional information or speciﬁc questions, contact Crydom Technical Support.

(4 places)

DataSheet

Panel Mount

SURGE CURRENT INFORMATION

100

120

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

10 A

100

150

200

250

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

25 A

100

200

300

400

500

600

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

50 A

100

200

400

300

500

600

700

900

800

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

75 A

150

450

300

600

750

900

1200

1050

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

90 A

300

600

900

1200

1500

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

110 A

200

400

800

600

1000

1200

1400

1800

1600

0.01 0.1 1 10

Surge Current (Amp)

Surge Duration (Secs)

125 A

Non repetitive peak surge current at Tj initial 40ºC.

Do not forget to visit us at: www.crydom.com

DataSheet

Panel Mount

THERMAL DERATE INFORMATION

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

10 A

3ºC/W 5ºC/W No Heatsink

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

25 A

1.5ºC/W 2ºC/W 3ºC/W

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

50 A

0.7ºC/W 1ºC/W 1.5ºC/W 2ºC/W

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

75 A

0.5ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

90 A

0.5ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W

120

100

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

110 A

0.5ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W

100

120

20 30 40 50 60 70 80

Ambient Temperature (ºC)

Load Current (Amps)

125 A

0.5ºC/W 0.7ºC/W 1ºC/W

Do not forget to visit us at: www.crydom.com

DataSheet

Panel Mount

AGENCY APPROVALS

EN60950 : Meets the requirements of sections 1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:

Designed in accordance with the requirements of IEC 62314

IEC 61000-4-2 : Electrostatic Discharge – Level 3

IEC 61000-4-4 : Electrically Fast Transients – Level 3

IEC 61000-4-5 : Electrical Surges – Level 3

IEC 60068-2-6 : Vibration 0.33mm and 0.75 mm Amplitude over 10-55 Hz

IEC 60068-2-27 : Shock Resistance 15g/11ms

E116949 LR81689 10143 UG (Not Applicable: -B and 4D)

ACCESORIES

Recommended Accessories

Cover Hardware

Kit

Heat Sink

Part No.

Thermal Resistance

[ºC/W]

Lug Terminal Thermal Pad

KS101 HK1

HK4

HS501DR

HS301 / HS301DR

HS251

HS201 / HS201DR

HS172

HS151 / HS151DR

HS103 / HS103DR

HS072

HS053

5.0

3.0

2.5

2.0

1.7

1.5

1.0

0.7

0.5

TRM1

TRM6

HSP-1

HSP-2

Rev.071714

Do not forget to visit us at: www.crydom.com

Part number: KS101

Clear plastic cover compatible with all new

S1 designs. Safety covers provide added

protection from electric shock when

installing or checking equipment.

Protective Cover

Hardware Kit

Part number: HK4

Bag with 2 square brass accessories and 2

screw 8-32 x 5/8 for output. Used to mount

TMR1 lug terminals.

New Accessories!

Protective Cover & Hardware Kits

DataSheet

Panel Mount

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险

HAZARD OF

ELECTRIC

SHOCK,

EXPLOSION,

OR ARC FLASH.

•Disconnect all

power before

installing or

working with

this equipment.

•Verify all

connections

and replace all

covers before

turning on

power.

Failure to follow

these

instructions will

result in death

or serious injury.

RIESGO DE

DESCARGA

ELECTRICA O

EXPLOSION.

•Desconectar

todos los

suministros de

energia a este

equipo antes

de trabajar

con este equipo.

•Verificar todas

las conexiones

y colocar todas

las tapas antes

de energizer

el equipo.

incumplimiento

de estas

instrucciones

puede provocar

la muerte o

lesiones serias.

RISQUE DE

DESCHARGE

ELECTRIQUE

OU EXPLOSION

•Eteindre

toutes les

sources

d'énergie de

cet appareil

avant de

travailler

dessus de cet

appareil

•Vérifier tous

connections, et

remettre tous

couverts en

olace avant de

mettre sous

De non-suivi de

ces instructions

provoquera la

mort ou des

lésions sérieuses

sérieuses.

GEFAHR EINES

ELEKTRISCHE

N SCHLAGES

ODER EINER

EXPLOSION.

•Stellen Sie

jeglichen

Strom ab, der

dieses Gerät

versorgt, bevor

Sie an dem

Gerät Arbeiten

durchführen

•Vor dem

Drehen auf

Energie alle

Anschlüsse

überprüfen

und alle

Abdeckungen

ersetzen.

Unterlassung

dieser

Anweisungen

können zum

Tode oder zu

schweren

Verletzungen

führen.

RISCHIO DI

SCOSSA

ELETTRICA O

DELL’ESPLOSI

ONE.

•Spenga tutta

l'alimentazion

e che fornisce

questa

apparecchiatu

ra prima del

lavorare a questa

apparecchiatu ra

•Verificare tutti

i collegamenti

e sostituire

tutte le coperture

prima della

rotazione

sull'alimentazi one

L'omissione di

seguire queste

istruz ioni

provocherà la

morte o di

lesioni serie

存在电击、

爆炸或电弧

闪烁危险

•

在操作此设

备之前请先

关闭电源。

若不遵守这些说明，

可能会导致严重的

人身伤害甚至死亡。

WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告

RISK OF MATERIAL DAMAGE AND HOT

ENCLOSURE

• The product's side panels may be hot, allow

the product to cool before touching.

• Follow proper mounting instructions including

torque values.

• Do not allow liquids or foreign objects to enter

this product.

Failure to follow these instructions can result in

serious injury, or equipment damage.

RISQUE DE DOMMAGE MATERIEL ET DE

SURCHAUFFE DU BOITIER

• Les panneaux latéraux du produit peuvent être

chauds. Laisser le produit refroidir avant de le

toucher.

• Respecter les consignes de montage, et

notamment les couples de serrage.

• Ne pas laisser pénétrer de liquide ni de corps

étrangers à l'intérieur du produit.

Le non-respect de cette directive peut entraîner,

des lésions corporelles graves ou des

dommages matériels.

Die Nichtbeachtung dieser Anweisung kann

Körperverletzung oder Materialschäden

zur Folge haben.

GEFAHR VON MATERIALSCHÄDEN UND

GEHÄUSEERHITZUNG

• Die Seitenwände können heiß sein. Lassen Sie

das Produkt abkühlen, bevor Sie es berühren.

• Beachten Sie die Montageanweisungen,

• Führen Sie keine Flüssigkeiten oder

Fremdkörper in das Produkt ein.

Si no se respetan estas precauciones pueden

producirse graves lesiones, daños materiales.

RIESGO DE DAÑOS MATERIALES Y DE

SOBRECALENTAMIENTO DE LA UNIDAD

• Los paneles laterales del producto pueden

estar calientes. Esperar que el producto se

enfríe antes de tocarlo.

• Respetar las instrucciones de montaje, y en

particular los pares de apretado.

• No dejar que penetren líquidos o cuerpos

extraños en el producto.

La mancata osservanza di questa precauzione può

causare gravi rischi per l'incolumità personale o

danni alle apparecchiature.

RISCHIO DI DANNI MATERIALI E D'INVOLUCRO

CALDO

• I pannelli laterali dell'apparecchio possono

scottare; lasciar quindi raffreddare il prodotto

prima di toccarlo.

• Seguire le istruzioni di montaggio corrette.

• Non far entrare liquidi o oggetti estranei in questo

apparecchio.

如不能正确执行这些操作说明，

极有可能造成严重人体伤害或者设备的损坏。

材料损坏和高温外壳的危险性

• 产品的一侧面板可能很热，在其冷却前请

不要触碰。

• 遵照正确的安装说明，包括扭矩值。

• 请勿让液体及其他异物进入本产品。

Do not forget to visit us at: www.crydom.com

DataSheet

Panel Mount

ANNEX - ENVIROMENTAL INFORMATION

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China

Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.

Part

Name

Toxic or hazardous Substance and Elements

Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated

(Pb) (Hg) (Cd) Chromium

(Cr (VI))

biphenyls

(PBB)

diphenyl ethers

(PBDE)

Semiconductor die

Solder

附件 - 环保信息

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,

电子信息产品污染控制标识要求。

有毒有害物质或元素件部

名称铅汞镉六价铬多溴联苯多溴二苯醚

(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)

半导体芯片

焊接点

Do not forget to visit us at: www.crydom.com