TB62003,004,006009P/F/FW TOSHIBA Bi-CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62003P,TB62003F,TB62003FW,TB62004P,TB62004F,TB62004FW,TB62006P TB62006F,TB62006FW,TB62007P,TB62007F,TB62007FW,TB62008P,TB62008F TB62008FW,TB62009P,TB62009F,TB62009FW 8CH DMOS TRANSISTOR ARRAY WITH GATE TB62003P, TB62003F, TB62003FW INVERTER & DMOS DRIVER TB62004P, TB62004F, TB62004FW THROUGH & DMOS DRIVER TB62006P, TB62006F, TB62006FW NAND & DMOS DRIVER TB62007P, TB62007F, TB62007FW AND & DMOS DRIVER TB62008P, TB62008F, TB62008FW NOR & DMOS DRIVER TB62009P, TB62009F, TB62009FW OR & DMOS DRIVER The TB62003 Series are high-voltage, high-current arrays comprised of eight N-ch DMOS pairs. FEATURES Package : Type-P DIP-20 pin Type-F SOP-20 pin (200 mil) Type-FW SOL-20 pin (300 mil) Output rating : 35 V (Min.) / 200 mA (Max.) Low power Weight DIP20-P-300-2.54 A : 2.25 g (Typ.) SOP20-P-300-1.27 : 0.25 g (Typ.) SOL20-P-300-1.27 : 0.48 g (Typ.) 1 2001-07-04 TB62003,004,006009P/F/FW PIN CONNECTION (TOP VIEW) TB62003P / F / FW TB62004P / F / FW TB62003P / F / FW TB62007P / F / FW TB62008P / F / FW TB62009P / F / FW 2 2001-07-04 TB62003,004,006009P/F/FW TRUTH TABLE TB62006P / F / FW INPUT OUTPUT I1~4 I5~8 CONT1~4 CONT5~8 O3~4 O5~8 H X H X OFF NOT FIX H X L X ON NOT FIX L X H X ON NOT FIX L X L X ON NOT FIX X H X H NOT FIX OFF X H X L NOT FIX ON X L X H NOT FIX ON X L X L NOT FIX ON X: Don't Care TB62007P / F / FW INPUT OUTPUT I1~4 I5~8 CONT1~4 CONT5~8 O3~4 O5~8 H X H X ON NOT FIX H X L X OFF NOT FIX L X H X OFF NOT FIX L X L X OFF NOT FIX X H X H NOT FIX ON X H X L NOT FIX OFF X L X H NOT FIX OFF X L X L NOT FIX OFF X: Don't Care 3 2001-07-04 TB62003,004,006009P/F/FW TB62008P / F / FW INPUT OUTPUT I1~4 I5~8 CONT1~4 CONT5~8 O3~4 O5~8 H X H X OFF NOT FIX H X L X OFF NOT FIX L X H X OFF NOT FIX L X L X ON NOT FIX X H X H NOT FIX OFF X H X L NOT FIX OFF X L X H NOT FIX OFF X L X L NOT FIX ON X: Don't Care TB62009P / F / FW INPUT OUTPUT I1~4 I5~8 CONT1~4 CONT5~8 O3~ 4 O5~8 H X H X ON NOT FIX H X L X ON NOT FIX L X H X ON NOT FIX L X L X OFF NOT FIX X H X H NOT FIX ON X H X L NOT FIX ON X L X H NOT FIX ON X L X L NOT FIX OFF X: Don't Care 4 2001-07-04 TB62003,004,006009P/F/FW MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Supply Voltage VDD 7 V DC Output Voltage VDS -0.5~35 V DC Output Current IDS 200 mA / ch DC Input Voltage VIN -0.4+VDD+0.4 V DC Input Current IIN 5 mA Input Diode Current IID 5 mA Output Diode Current IOK 5 mA P Power Dissipation F 1.47 PD FW W 0.96 (Note 1) 1.00 (Note 2) Operating Temperature Topr -40~85 C Storage Temperature Tstg -55~150 C Note 1: On Glass Epoxy PCB (50 x 50 x 1.6 mm Cu 40%) Note 2: Delated above 25C in the proportion of 7.7 mW / C (F Type), 8.0 mW / C (FW Type). RECOMMENDED OPERATING CONDITION (Ta = -40~85C) CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT Supply Voltage Range VDD 4.5 5.5 V DC Output Voltage VDS 30 V 170 90 140 150 80 120 GND VDD P Duty 80% F DC Output Current FW P 8ch On VDD = 5.0 V IDS Duty 100% F FW DC Input Voltage VIN 5 mA / ch V 2001-07-04 TB62003,004,006009P/F/FW ELECTRICAL CHARACTERISTICS (Ta = 25C, VDD = 5.0 V) CHARACTERISTIC SYMBOL TEST CIR- CUIT IOZ VDS MIN TYP. MAX UNIT VDS = 35 V 50 A IDS = 150 mA 0.70 0.8 IDS = 200 mA 0.94 1.2 RON IDS = 200 mA 4.7 6.0 IIN VIN = GND, VIN = VDD 1.0 A VIN (H) 3.5 VDD +0.4 V VIN (L) -0.4 1.5 IDDopr 8ch On, Output open fIN = 1MHz 2 A Output Diode Forward Voltage VFK IOK = 5 mA 0.6 V Turn-On Delay tON IOUT = 170 mA 300 Turn-Off Delay tOFF 300 Supply Current IDD 10 A Input Capacitance CIN 15 pF Output Leakage Current Low-Level Output Voltage Output Resistance DC Input Current High-Level Input Voltage Operating Supply Current TEST CONDITION V ns PRECAUTIONS for USING This IC does not integrate protection circuits such as overcurrent and overvoltage protectors. Thus, if excess current or voltage is applied to the IC, the IC may be damaged. Please design the IC so that excess current or voltage will not be applied to the IC. Utmost care is necessary in the design of the output line, VCC (VDD) and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 6 2001-07-04 TB62003,004,006009P/F/FW PACKAGE DIMENSIONS DIP20-P-300-2.54A Unit: mm Weight: 2.25 g (Typ.) 7 2001-07-04 TB62003,004,006009P/F/FW PACKAGE DIMENSIONS SOP20-P-300-1.27 Unit: mm Weight: 0.25 g (Typ.) 8 2001-07-04 TB62003,004,006009P/F/FW PACKAGE DIMENSIONS SOL20-P-300-1.27 Unit: mm Weight: 0.48 g (Typ.) 9 2001-07-04 TB62003,004,006009P/F/FW RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 10 2001-07-04