HGN-375(A, B, C) FUSED WITH ON/OFF SWITCH, IEC 60320 POWER INLET SOCKET WITH FUSE/S (5X20MM) MECHANICAL DIMENSIONS (Unit: mm) CASE A 60.71 49.83 55.04 Use only with a 250V Fuse Employer uniqement avec un fusible de 250V 65.4 60.0 O 32.45 3.5 40 +- 0.2 49.37 28.5 29.5 40.0+- 0.2 4x R0.5 6.30 TYP. 2x M3 61.5 CASE B FEATURES 2x 3.3 The HGN-375(A, B, C) series offers filters in three different package styles - Flange mount (sides), Flange mount (top/ bottom), & snap-in type. This cost effective series offers more component options with better performance in curbing common and differential mode noise. These filters are equipped with IEC connector, fuse holder for one or two 5 x 20 mm fuses, 2 pole on/off switch and fully enclosed metal housing. These filters are also available for Medical equipment with low leakage current and have been designed to bring various medical equipments into compliance with EN55011 and FCC Part 15J, Class B conducted emissions limits. 82 72 48.7 * Medical application (3.5) 2x 3.5 29 6.3 TYP. 29.3+0.5 60.8+0.5 72.0+0.1 CASE C (61.3) (56.2) TECHNICAL DATA * Rated Voltage: 125/250VAC * Rated Current: 1A, 2A, 3A, 4A, 6A, 10A * Power Line Frequency: 50/60Hz * Max. Leakage Current each Line to Ground: @ 115VAC 60Hz: 0.5mA, max @ 250VAC 50Hz: 1.0mA, max @ 125VAC 60Hz: 2A*, max @ 250VAC 50Hz: 5A*, max * Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC * Temperature Range: -25C to +85C 59.8 RECOMMENDED PANEL CUTOUT (MOUNT FROM FRONT) R2.5 TYP. APPLICATIONS Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment. Use only with a 250V fuse Employer uniquement avec un fusible de 250V 65 59.5 Use only with a 250V fuse Employer uniquement avec un fusible de 250V 59.8 48.7 28 32 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT) THICKNESS OF PANEL IS FROM 1.00mm to 1.6mm (3.5) R2.5 TYP. 29 6.3 TYP. 29.3+0.5 61.4+0.3 Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords. 145 Algonquin Parkway, Whippany, NJ 07981 * 973-560-0019 * FAX: 973-560-0076 e-mail: filtersales@powerdynamics.com * www.powerdynamics.com 81 HGN-375(A, B, C) Series Example & Ordering Code 01 5 - 1 Q - 1 SCHEMATICS A 1 FLANGE MOUNT, TOP/BOTTOM SNAP-IN LINE FLANGE MOUNT, SIDES L mH FUSE L CASE CODE: =A =B =C R N L' Cy CX L G' Cy LOAD HGN-375 A N' FUSE L mH G Lg 2 R N =Q 6.6 SOLDER =S WIRE =W G' Cy N' L mH LINE =2 RED ILLUMINATED SWITCH, 1 FUSE (5X20MM) =3 RED ILLUMINATED SWITCH, 2 FUSE (5X20MM) =4 GREEN ILLUMINATED SWITCH, 1 FUSE (5X20MM) =5 GREEN ILLUMINATED SWITCH, 2 FUSE (5X20MM) =6 R CX L' L FUSE L mH G N' G' Lg 2M L N G NO BLEEDER RESISTOR & NO GROUND CHOKE = BLEEDER RESISTOR (1/4 W, 1M) = BLEEDER RESISTOR (1/2 W, 1M) = BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE = BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE = GROUND CHOKE (400H) = L mH FUSE LINE BLACK, NON-ILLUMINATED SWITCH, 2 FUSE (5X20MM) L mH FUSE N FUSE & SWITCH BLACK, NON-ILLUMINATED SWITCH, 1 FUSE (5X20MM) = 1 OPTIONS: OPTIONS: COMPONENT LOCATIONS: L' Cy 1M L OPTIONS: CX LOAD QUICK CONNECT UL 1015, 18AWG STRANDED, 4" FUSE L MEDICAL SCHEMATICS 8.0 2.0 -3.0L 4.0/0.187 CX G 3.0 -3.6L 6.3/0.25 L mH FUSE L LOAD 01 02 03 04 06 10** R FUSE CX L L' CX L mH LOAD TERMINAL: = = = = = = LINE CURRENT RATING (A): N' G' 0 5 6 7 8 9 STANDARD TYPE STANDARD TYPE; ADDITIONAL C(X) BEHIND L WITHOUT C(Y); C(X) ONLY WITHOUT C(Y); ADDITIONAL C(X) BEHIND L = = = = 1 2 1M 2M Contact PDI for attenuation numbers **UL and cUL approved to 10A; VDE approved to 6.3A Not available for Schematic 2 & 2M ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. Capacitor C(x) Capacitor C(y) 1A (mH) 0.1F 2200pF 6.5 0.1F 3300pF 3.7 0.22F 2200pF 7.5 0.22F 3300pF 10.5 2A (mH) 3.8 2.7 5.5 6.5 3A (mH) 2.5 1.8 2.5 2.5 4A (mH) 1.6 1.3 2.0 2.7 6A (mH) 0.8 0.8 0.8 1.05 10A (mH) 0.2 0.3 0.4 0.4 = = = = A B C D = = = = M1 M2 M3 M4 Medical applications, select Attenuation code with corresponding component values from the table. Capacitor C(x) 0.1F 0.1F 0.22F 0.22F 82 1A (mH) 6.5 3.7 7.5 10.5 2A (mH) 3.8 2.7 5.5 6.5 3A (mH) 2.5 1.8 2.5 2.5 4A (mH) 1.6 1.3 2.0 2.7 6A (mH) 0.8 0.8 0.8 1.05 10A (mH) 0.2 0.3 0.4 0.4 145 Algonquin Parkway, Whippany, NJ 07981 * 973-560-0019 * FAX: 973-560-0076 e-mail: filtersales@powerdynamics.com * www.powerdynamics.com HGN-375(A, B, C) Series Attenuation Tables Non-Medical Applications Medical Applications Insertion loss in dB (50 Ohm circuit) Attenuation Current Code Rating 1A 2A 3A 4A 6A 10A B C D Insertion loss in dB (50 Ohm circuit) Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz .15 .5 1 5 10 30 .15 .5 1 5 10 30 34 38 40 32 26 11 8 25 37 71 62 12 29 32 55 48 49 51 8 23 34 68 64 14 28 36 39 45 48 39 8 19 27 58 65 15 22 27 30 48 54 47 8 19 28 66 72 34 18 24 28 44 50 47 8 18 26 43 51 31 8 14 18 33 41 39 8 18 25 29 38 31 1A 2A 3A 4A 6A 10A 29 33 47 53 57 41 8 23 35 73 58 14 28 37 44 52 56 41 8 19 27 74 59 17 25 33 46 53 57 44 8 19 29 63 62 13 19 24 27 43 53 38 8 18 25 57 60 32 19 29 36 49 55 46 8 18 23 50 54 24 11 19 24 41 53 36 8 18 24 51 46 25 1A 2A 3A 4A 6A 10A 37 44 52 47 48 49 17 35 48 65 57 36 31 34 48 50 52 50 16 33 48 63 62 17 25 30 34 45 47 39 15 27 37 59 57 21 27 28 33 50 56 48 14 26 35 51 57 24 19 25 30 43 51 44 15 25 32 60 59 29 14 19 24 41 54 42 14 25 33 45 56 31 1A 2A 3A 4A 6A 10A 36 54 53 45 32 40 26 60 84 49 36 17 35 42 50 51 57 59 15 32 45 70 71 14 25 31 37 48 52 37 15 27 37 60 56 23 26 32 41 49 51 45 14 26 36 64 57 23 19 27 32 47 56 45 14 25 31 56 59 31 14 18 22 38 49 41 17 42 64 58 49 29 A Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 35 38 40 32 20 24 8 25 37 71 62 12 2A 30 34 36 31 18 22 8 23 34 68 64 14 3A 27 34 36 29 23 22 8 19 27 58 65 15 4A 22 27 28 29 26 13 8 18 26 43 51 31 6A 20 25 26 27 25 32 8 18 25 29 38 31 10A 9 13 19 19 17 13 7 17 23 39 47 27 M1 M2 M3 M4 1A 2A 3A 4A 10A 28 35 37 28 22 24 8 20 29 61 48 15 25 33 58 51 56 41 8 20 30 57 47 13 11 16 18 18 16 12 8 18 24 47 36 24 19 23 24 27 27 21 8 19 27 47 45 30 11 16 18 18 16 12 8 18 24 47 36 24 1A 2A 3A 4A 6A 10A 37 45 41 22 30 19 17 35 47 57 44 34 31 35 37 31 37 15 16 34 48 57 54 18 25 29 30 26 19 12 15 28 38 52 47 19 24 27 28 30 27 22 14 26 37 44 45 23 19 24 25 25 23 17 15 26 33 50 44 27 14 16 18 20 20 15 14 26 34 37 35 26 1A 2A 4A 6A 17 36 49 65 47 23 38 42 42 25 43 16 35 38 40 33 20 24 16 33 45 66 53 14 26 30 31 27 19 14 14 27 37 60 46 20 19 24 25 25 24 17 14 25 33 45 42 29 This table applies to schematic 1M only. Visit our website or contact PDI for other schematic attenuation numbers. This table applies to schematic 1 only. Visit our website or contact PDI for other schematic attenuation numbers. 145 Algonquin Parkway, Whippany, NJ 07981 * 973-560-0019 * FAX: 973-560-0076 e-mail: filtersales@powerdynamics.com * www.powerdynamics.com 83