AV SERIES PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable * Irremovable * Anti-jamming construction : reduced travel to prevent insertion of foreign parts * Contact and mechanism protected against crushing * Fire resistant * Long life Sealed versions Degrees of protection (switches mounted on vertical panels) : - standard version : IP54 - sealed version : IP65 Table explaining degrees of protection (IP and IK codes) The degree of protection is indicated by 2 letters and 2 numbers. Example : I P 6 5 protection against water protection against dust 1st number : protection against ingress of solid objects IP K tests IP** degree of protection provided by the enclosures of electric appliances according to IEC 529 and DIN 40050. IK.** degree of protection provided by the enclosures of electric appliances against external mechanical impacts according to EN 50102 (NFC 20-015). 2nd number : protection against liquids IP tests 0 Non-protected 0 Non-protected 1 Protected against solid objects of 50 mm (1.968) and greater 1 Protected against vertically falling water drops 2 Protected against solid objects of 12,5 mm (.492) and greater 2 Protected against vertically falling water drops when enclosure tilted up to 15 3 Protected against solid objects of 2,5 mm (.098) and greater 3 Protected against water sprayed vertically at an angle up to 60 4 Protected against solid objects of 1 mm (.039) and greater 4 Protected against splashing water 5 Dust-protected (no harmful ingress) 5 Protected against water jets from any direction 6 Dust-tight (no ingress) IK code : mechanical protection The degree of mechanical protection is now defined by the letters IK according to EN 50102 of June 1995 (NFC 20-015) It is only applicable to the "Anti-vandal" switch family. See following pages. Packaging unit : 20 or 40 pieces depending on models, except AV..4700 (10 pieces), AV06 (60 pieces), AV22P, AV22L and AV24L with anodised plunger (16 pieces). Mounting accessories : Standard and special hardware are presented in section N. K-2 A P E M AV SERIES PUSHBUTTON SWITCHES Distinctive features The AV series is a large range of security pushbutton switches including 4 product families : ANTI-VANDAL PUSHBUTTON SWITCHES (page K-4) * Increased impact resistance provided by a nut or mechanical stop * Stainless steel actuator and bushing SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR (page K-7) * Ergonomic actuator dia. 20 mm (.787) or 30 mm (1.181) * Tactile feedback * Up to 5A 250VAC OTHER SECURITY PUSHBUTTON SWITCHES (page K-10) * A large variety of actuator shapes, electrical functions, connections, finish and marking options K SNAP-ACTION SECURITY PUSHBUTTON SWITCHES (page K-15) * Tactile feedback * Illuminated or non-illuminated A P E M K-3 AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES Distinctive features and specifications Increased impact resistance provided by a nut or mechanical stop Stainless steel actuator and bushing SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 2A 48 VDC * Initial contact resistance : 10 m max. at 1A 2V * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals * Electrical life : 10.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Case : PBT * Contacts : brass, silver plated (C) * Bushing : stainless steel * Actuator : stainless steel CUT-OUTS * Panel cut-out : O 19,2 mm (.755) or O 22,2 mm (.874) * Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) ROBUSTNESS Model O 19 mm (.748) 5 Kg 1.7 Kg Degree of protection according to EN 50102, June 95 (NFC 20-015) Impacts on actuator according to CECC 96000 Hammer radius 10 mm IK08 29.5 cm Hammer radius 25 mm 0.3 Kg 34 cm Model O 22 mm (.866) Striking energy: 5 joules (5Nm) 10 strokes Striking energy: 1 joule (1Nm) 40 cm Hammer radius 50 mm 1.5 Kg 34 cm K K-4 A P E M IK10 Striking energy: 20 joules (20Nm) 10 strokes Striking energy: 5 joules (5Nm) AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES Bushing O 19 (.748) ORDER FORMAT Series Bush./act. config. AV Case style Function Contact material 100 3 C Bush./act. material Sealing 40 09 19 9D NO (function 3) Terminal type 9 2 N T BASIC MODEL Hex nut 22 (.866) across flats Flat actuator - AV09..40N 3.00 (.118) o19.00x1.00 SI (.748DIAx1.00 IS) 7.30 (.287) 1.20 (.047) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV091003C240N 2.80 (.110) o22.00 (.866DIA) o22.00 (.866DIA) Screw terminals AV091003C940N o15.00 (.590DIA) 5.00 (.196) o2.50 (.098DIA) 2.00 (.078) 9.50 (.374) 6.50 (.255) 3.00 (.118) EPOXY OTHER CONFIGURATIONS Curved actuator Flush model O22.00 (.866DIA) O22.00 (.866DIA) O22.20 Mini (.874DIA Min.) Screw terminals AV191003C940N Solder lug / quick-connect terminals AV191003C240N 1.30 Mini (.051 Min.) 1.20 (.047) 2.00 (.078) 3.60 (.141) O15.00 (.590DIA) O19.20 (.755DIA) Screw terminals AV9D1003C940N Solder lug / quick-connect terminals AV9D1003C240N K SEALING 1 2 T Front panel sealing (IP65) To order a sealed product, replace N with T at the end of above part numbers. internal gasket external gasket Robustness : see "Specifications" page. A P E M K-5 AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES Bushing O 22 (.866) ORDER FORMAT Series Bush./act. config. AV Case style Function Contact material 100 3 C Terminal type Sealing 40 03 02 M3 M2 NO (function 3) Bush./act. material 9 2 N T BASIC MODEL Hex nut 25 (.984) across flats Flat actuator - AV03..40N o22.00x1.00 SI (.866DIAx1.00 IS) 2.00 (.078) 7.30 (.287) 3.00 (.118) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV031003C240N o15.00 (.59DIA) o25.00 (.984DIA) Screw terminals AV031003C940N 1.20 (.047) 2.80 (.110) o2.50 (.098DIA) 12.70 (.500) 6.30 (.248) EPOXY 5.00 (.196) OTHER CONFIGURATIONS Curved actuator Flatted bushing O25.00 (.984DIA) O15.00 (.590DIA) 2.00 (.078) 3.60 (.141) O15.00 (.590DIA) Screw terminals AV021003C940N Solder lug / quick-connect term. AV021003C240N K Flat actuator Screw terminals AVM31003C940N Curved actuator Screw terminals AVM21003C940N SEALING 1 2 T K-6 O25.00 (.984DIA) Front panel sealing (IP65) To order a sealed product, replace N with T at the end of above part numbers. internal gasket external gasket Robustness : see "Specifications" page. A P E M O22.20 (.874DIA) 10.00 (.393 ) AV SERIES SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR Bushing O 22 (.866) ORDER FORMAT Series Bushing diameter Bush./act. config. AV 22 L Actuator style Bush./act. Contact/ matl terminals 40 P B C Combined NC/NO 2 4 See next page. SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 5A 250VAC * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 1.000.000 cycles at 1A 250VAC 100.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -20C to +55C * Mechanical life : 3.000.000 cycles * Front panel sealing : IP65 * Case : polyester, glass filled * Contacts : silver/nickel alloy * Bushing : stainless steel (std) * Actuator : stainless steel (std) CUT-OUT * Panel cut-out : O 22,2 (.874) or O 24,2 (.952) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) All model numbers below are for switches with standard bushing/actuator material. BASIC MODEL Flat actuator - solder lug terminals - AV22LP O-ring 29.00 (1.142) Hex nut 25 (.984) across flats 3.00 (.118) 4.00 (.157) 1.40 (.055) 2.40 (.094) 0.50 (.019) O20.00 (.787DIA) O26.00 (1.023DIA) AV22LP402 O22.00x1.00 SI (.866DIAx1.00 IS) 12.50 (.492) K OTHER CONFIGURATIONS Curved actuator AV22LB402 Recessed actuator AV22LC402 A P E M K-7 AV SERIES SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR Bushing O 24 (.944) - low profile BASIC MODEL O-ring Flat actuator - solder lug terminals - AV24LP Hex nut 27 (1.062) across flats 30.80 (1.213) 4.00 (.157) 0.50 (.019) 1.30 (.051) 2.40 (.094) 1.40 (.055) O20.00 (.787DIA) O30.00 (1.181DIA) AV24LP402 O24.00x1.00 SI (.944DIAx1.00 IS) 14.20 (.559) OTHER CONFIGURATIONS Curved actuator Recessed actuator AV24LB402 AV24LC402 BUSHING/ACTUATOR MATERIAL For non-standard material, replace 40 with one of the following codes. Models with non-anodized actuator CODE BUSHING 40 (standard) Stainless steel 20 Chrome plated brass K ACTUATOR Stainless steel Chrome plated brass Models with anodized actuator CODE BUSHING ACTUATOR COLOUR Colours 1* 2* 4* Black chrome plated brass Chrome plated brass Stainless steel Replace * with colour code opposite. 2 : black 3 : pale green 5 : gold yellow 6 : red CONTACT / TERMINALS 2 (standard) NC/NO, solder lug terminals 4 NC/NO, quick-connect terminals o1.40 (.055 DIA) 4 K-8 A P E M 2.80 (.110) AV SERIES MUSHROOM HEAD SECURITY PUSHBUTTON SWITCHES Bushing O 22 (.866) ORDER FORMAT Series Bushing diameter Bush./act. config. AV 22 PNA Actuator colour Contact/ terminals 2 3 4 5 6 2 4 Combined NC/NO SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 5A 250VAC * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 1.000.000 cycles at 1A 250VAC 100.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Front panel sealing : IP65 * Case : polyester, glass filled * Contacts : silver/nickel alloy * Bushing : brass, nickel plated * Actuator : aluminium, anodized CUT-OUT * Panel cut-out : O 22,2 (.874) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) BASIC MODEL Hex nut 25 (.984) across flats Solder lug terminals - red actuator - AV22PNA 25.00 (.984) 2.40 (.094) 0.50 (.019) 4.00 (.157) 1.40 (.055) o30.00 (1.181DIA) AV22PNA62 8.50 (.334) o22.00x1.00 SI (.866DIAx1.00 IS) Joint (O-ring) 10.80 (.425) K ACTUATOR COLOUR 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red CONTACT / TERMINALS 2 (standard) NC/NO, solder lug terminals 4 NC/NO, quick-connect terminals o1.40 (.055 DIA) 4 A P E M 2.80 (.110) K-9 AV SERIES SECURITY PUSHBUTTON SWITCHES Bushing O 16 (.629) ORDER FORMAT Series Bush./act. Function config. AV 3 Case style Contact matl. Term. type 0 C 9 06 16 08 NO (function 3) Bush./act. material Sealing 00 40 K See "options" page. SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 200mA 48 VDC - 100mA 48VDC * Initial contact resistance : 50 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 50.000 cycles at 200mA 48VDC 100.000 cycles at 100mA 48VDC * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Case : PBT * Contacts : brass, silver plated (C) * Bushing and actuator : - nickel plated brass (std), code 00 - stainless steel, option 40 CUT-OUT * Panel cut-out : O 16,2 (.637) * Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) All model numbers below are for switches with standard bushing/actuator material, without marking. BASIC MODEL Hex nut 19 (.748) across flats Flat actuator - screw terminals - AV06 3.00 (.118) 3.00 (.118) 1.50 (.059) K OTHER CONFIGURATIONS AV1630C900 K-10 1.50 (.059) 2.00 (.078) Curved actuator w. chamfer 3.00 (.118) 1.50 (.059) Curved actuator AV0830C900 A P E M o16.00X1.00 SI (.629DIAX1.00 IS) o12.00 (.472DIA) o18.00 (.708DIA) AV0630C900 o2.50 (.098DIA) 9.50 (.374) 11.20 (.440) AV SERIES SECURITY PUSHBUTTON SWITCHES Bushing O 19 (.748) ORDER FORMAT Series Bush./act. config. AV Case style Function Contact matl. 3 C 100 09 19 9P 9B NO (function 3) Term. type Bush./act. Marking Sealing material 00 9 2 K See "options" page. SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 2A 48 VDC * Initial contact resistance : 10 m max. at 1A 2V * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals * Electrical life : 10.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Case : PBT * Contacts : brass, silver plated (C) * Bushing : brass, nickel plated (std) * Actuator : brass, nickel plated (std) CUT-OUT * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) All model numbers below are for switches with standard bushing/actuator material, without marking. BASIC MODEL Hex nut 22 (.866) across flats Flat actuator - AV09..00 o19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 1.20 (.047) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV091003C200 2.80 (.110) o15.00 (.590DIA) o22.00 (.866DIA) Screw terminals AV091003C900 7.30 (.287) 3.00 (.118) o2.50 (.098DIA) 13.50 (.531) 5.50 (.216) 5.00 (.196) EPOXY OTHER CONFIGURATIONS With knurled nut for matrix mounting 25 (.984) x 25 (.984) O15.00 (.590DIA) O15.00 (.590DIA) O15.00 (.590DIA) Screw terminals AV191003C900 Solder lug / quick-connect terminals AV191003C200 Flat actuator, screw term. AV9P1003C900 Flat actuator, solder lug term. AV9P1003C200 A P E M 25.00 (.984) Curved actuator, screw term. AV9B1003C900 Curved act., solder lug term. AV9B1003C200 25.00 (.984) 25.00 (.984) O22.00 (.866DIA) 4.50 (.177) O22.00 (.866DIA) 4.50 (.177) O22.00 (.866DIA) 2.00 (.078) 3.60 (.141) Curved actuator Wrench available under P/N U1929. K-11 K AV SERIES SECURITY PUSHBUTTON SWITCHES Bushing O 22 (.866) ORDER FORMAT Series Bush./act. config. AV Case style 100 Function Contact matl. 3 C 03 02 M3 M2 NO (function 3) Term. type Bush./act. Marking Sealing material 00 9 2 K See "options" page. SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 2A 48 VDC * Initial contact resistance : 10 m max. at 1A 2V * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals * Electrical life : 10.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Case : PBT * Contacts : brass, silver plated (C) * Bushing : brass, nickel plated (std) * Actuator : brass, nickel plated (std) CUT-OUTS * Panel cut-out : O 22,2 mm (.874) * Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) All model numbers below are for switches with standard bushing/actuator material, without marking. BASIC MODEL Hex nut 25 (.984) across flats Flat actuator - AV03..00 o22.00x1.00 SI (.866DIAx1.00 IS) 2.00 (.078) 7.30 (.287) 3.00 (.118) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV031003C200 o15.00 (.59DIA) o25.00 (.984DIA) Screw terminals AV031003C900 1.20 (.047) 2.80 (.110) o2.50 (.098DIA) 12.70 (.500) K 6.30 (.248) EPOXY 5.00 (.196) OTHER CONFIGURATIONS Curved actuator Flatted bushing O15.00 (.590DIA) O15.00 (.590DIA) Screw terminals AV021003C900 Solder lug / quick-connect terminals AV021003C200 K-12 O25.00 (.984DIA) 2.00 (.078) 3.60 (.141) O25.00 (.984DIA) Flat actuator Screw terminals AVM31003C900 Curved actuator Screw terminals AVM21003C900 A P E M O22.20 (.874DIA) 10.00 (.393 ) AV SERIES SECURITY PUSHBUTTON SWITCHES Bushing O 19 (.748) or O 22 (.866) - other electrical functions Hex nut 22 (.866) across flats Bushing O 19 (748) - combined NC/NO - AV..9035 * Single pole, solder lug terminals * Gold plated silver contacts * Current/voltage rating with resistive load : - max. : 1A 30V - min : 10A 5V O19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 0.80 (.031) O15.00 (.590DIA) O22.00 (.866DIA) Curved actuator AV199035D200 15.00 (.590) 3.60 (.141) O22.00x1.00 SI (.866DIAx1.00 IS) Curved actuator AV021202C00 ON - 15.40 (.606) (.519) 7.00 (.275) Hex nut 25 (.984) across flats O15.00 (.59DIA) 5.80 (.228) 3.00 (.118) 1.60 (.063) 3.60 (.141) ON 14.00 (.551) O22.00x1.00 SI (.866DIAx1.00 IS) O25.00 (.984DIA) * Double pole, solder lug/quick-connect term., curved actuator * Silver contacts * Max. current/voltage rating with resistive load : 3(1,5)A 250VAC - 6A 125VAC - 3A 24VAC or DC * Dielectric strength : 3.000 Vrms min. between terminals and frame * Electrical life : 10.000 cycles at full load 50.000 cycles at 1A 24VAC or DC * Mechanical life : 100.000 cycles * Further specifications : see previous page. O3.00x0.50 (.118DIAx.0.50) 13.20 3.60 (.141) Bushing O 22 (.866) - alternate action - AV..4700 AV044746A200 3.00 (.118) O15.00 (.59DIA) O15.00 (.59DIA) O25.00 (.984DIA) 2.00 (.078) 8.40 (.330) Flat actuator AV031202C00 5.20 (.204) Hex nut 25 (.984) across flats Bushing O 22 (.866) - Normally closed (NC) - AV..1200 * Single pole, screw terminals, without marking * Silver plated copper contacts (C) * Max. current/voltage rating with resistive load : 2A 250VAC - 3A 125VAC - 2,5A 24VDC * Dielectric strength : 2.000 Vrms 50 Hz min. betw. terminals and frame 2.000 Vrms. 50 Hz min. between terminals * Electrical life : 100.000 cycles at 0,3A 24VAC or DC 10.000 cycles at full load * Further specifications : see previous page. 7.50 (.295) 0.50x2.80 (.019x.110) Flat actuator AV099035D200 O15.00 (.590DIA) * Dielectric strength : 1.000 Vrms between terminals 2.000 Vrms between terminals and frame * Electrical life : 250.000 cycles at full load * Mechanical life : 1.000.000 cycles * Further specifications : see previous page. 2.00x0.40 (.078x.015) 1.20 (.047) Note : a current above 100mA damages the gold plating. 5.08 (.200) 3.00 (.118) 14.00 (.551) 20.60 (.811) K 7.20 (.283) Bushing/actuator materials, marking and sealing : see "options" on next page. A P E M K-13 AV SERIES SECURITY PUSHBUTTON SWITCHES Options Series After selecting basic model number, fill in last 3 boxes with desired options. Bush./act. config. Case style Function Contact matl. Term. type Bush./act. Marking Sealing material AV BUSHING/ACTUATOR MATERIAL For non-standard material, replace 00 with one of the following codes. Models with flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) 10 12 20 30 80 Nickel plated brass Nickel plated brass Nickel plated brass Chrome plated brass Chrome plated brass Varnished polished brass Nickel plated brass Stainless steel Chrome plated brass Chrome plated brass Stainless steel Varnished polished brass Colours Models with flat thermoplastic actuator CODE BUSHING ACTUATOR COLOUR 0* (standard) 2* 8* Nickel plated brass Chrome plated brass Varnished polished brass Replace * with colour code opposite. 1 : blue 2 : black 3 : green 4 : grey 5 : yellow 6 : red 7/1: white 9 : orange Select an option from each of the two tables below. MARKING For flat or curved actuator. Not available on model AV031202C00. - by engraving on brass actuator (stainless steel on request) - by hot stamping on thermoplastic actuator. O15.00 (0.590DIA) TYPE OF MARKING CODE TYPE 0 to 9 X Y A to N P to W 0 Numbers 0 to 9 Symbol * Symbol # Letters A to N Letters P to W Letter O CODE 8.00 (0.314) Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces 1.50 (0.059) K COLOUR OF MARKING COLOUR Brass actuator 0 (standard) 2 Same as finish Black Note : a finished product supplied in version "0" cannot be modified to version "2". Thermoplastic actuator 2 Black 7 White SEALING Blank No sealing 1 1 2 2 K Frontal panel sealing (IP65) elastomer membrane external gasket internal gasket external gasket For types with bushing O 16 K-14 K Front panel sealing (IP65) For types with bushing O 19 or O 22 A P E M AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES Bushing O 19 (.748) - Illuminated or not ORDER FORMAT Series Bush./act. config. AV Case style Funct. Contact matl. C7 3 09 19 NO (function 3) Illum. or not Term. Bush./act. LED Marking Seal. type material colour D 2 2 00 L 0 K See "options" on next page. SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 50mA 24VDC * LED voltage and consumption : Two-colour LED 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA (a resistor must be series-connected by the user) * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and bushing * Electrical life : 1.000.000 cycles at full load * Operating force : 7 N +/-2N * Travel : 0,7 mm (.027) +/- 0,1 mm (.003) * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -30C to +70C * Soldering : 270C max. during 3 sec. * Case : PBT UL94-V0 * Terminals : brass, gold plated * Contacts : gold plated dome * Bushing : brass, nickel plated (std) * Actuator : brass, nickel plated (std) * LED CUT-OUTS * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) All model numbers below are for switches with standard bushing/actuator material, without marking. Hex nut 22 (.866) across flats Flat actuator - solder lug terminals - non-illuminated O19.00x1.00 SI (.748DIAx1.00 IS) 0.80 (.031) 1.90 (.074) 1.10 (.043) 3.00 (.118) 2 O15.00 (.590DIA) 1 O22.00 (.866DIA) 1.80 (.070) AV09C703D200 2.00 (.078) 4.15 (.163) 5.08 (.200) Also available with curved actuator : AV19C703D200 K Hex nut 22 (.866) across flats Flat actuator - solder lug terminals - illuminated 0 .8 ) x1 70 60 .0 0. 23x (.0 O19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 3.00 (.118) 1.90 (.074) O10.00 (.393DIA) 2 O15.00 (.590DIA) 1 O22.00 (.866DIA) 1.10 (.043) 1.80x0.80 (.070x.031) 0 .2 ) 12 80 (.4 AV09C7L3D200 3.90 (.153) 13.50 (.531) 4.15 (.163) 5.08 (.200) A P E M 13.50 (.531) 3.90 (.153) K-15 AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES Options After selecting basic model no., fill in last 4 boxes with desired options. Series Bush./act. config. Case style Illum. or not Funct. Contact matl. Term. Bush./act. LED Marking Seal. type material colour AV BUSHING/ACTUATOR MATERIAL For non-standard material, replace 00 with one of the following codes. Non-illuminated models Illuminated models CODE BUSHING ACTUATOR CODE BUSHING ACTUATOR 00 (std) 10 30 40 80 Nickel plated brass Nickel plated brass Chrome plated brass Stainless steel Varnished polished brass Nickel plated brass Stainless steel Stainless steel Stainless steel Varnished polished brass 00 (std) 20 40 45 80 Nickel plated brass Chrome plated brass Stainless steel Stainless steel Varnished polished brass Nickel plated brass Chrome plated brass Stainless steel Nickel plated brass Varnished polished brass LED COLOUR No LED Blank 1: Blue - 3 - Green - 5 - Yellow - 6 : Red - 7 : White - 9 : Orange - 2 : Red/green Select an option from each of the two tables below. MARKING For flat or curved actuator. TYPE OF MARKING - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert ( illuminated actuators) O10.00 (0.393DIA) CODE TYPE 0 to 9 X Y A to N P to W 0 Numbers 0 to 9 Symbol * Symbol # Letters A to N Letters P to W Letter O 8.00 (0.314) Letter O : same code and same design as number 0. K 1.00 (0.039) 1.50 (0.059) For special symbols, consult factory. Minimum order : 500 pieces SEALING No sealing Blank 1 2 K K-16 Front panel sealing (IP65) internal gasket external gasket A P E M COLOUR OF MARKING CODE COLOUR Non-illuminated actuators 0 (standard) Same as finish 2 Black Note : a finished product supplied in version "0" cannot be modified to version "2". Illuminated actuators 2 Black (on white)