AV SERIES PUSHBUTTON SWITCHES
Distinctive features
K-2
K
APEM
Table explaining degrees of protection (IP and IK codes)
The degree of protection is indicated by 2 letters and 2 numbers.
Example : I P 6 5
protection against water
protection against dust
❑ Attractive, robust and durable
• Irremovable
•Anti-jamming construction : reduced travel to prevent insertion of foreign parts
•Contact and mechanism protected against crushing
•Fire resistant
• Long life
❑ Sealed versions
❑ Degrees of protection (switches mounted on vertical panels) :
- standard version : IP54
- sealed version : IP65
IP•• degree of protection provided by the enclosures of electric
appliances according to IEC 529 and DIN 40050.
IK.•• degree of protection provided by the enclosures of
electric appliances against external mechanical impacts
according to EN 50102 (NFC 20-015).
1st number : protection against ingress of solid objects IK code :
mechanical protection
The degree of mechanical
protection is now defined
by the letters IK according
to EN 50102 of June
1995 (NFC 20-015)
It is only applicable to the
“Anti-vandal” switch
family. See following
pages.
IP tests
0
Non-protected Non-protected
Protected against vertically
falling water drops
1
Protected against solid
objects of 50 mm (1.968)
and greater
2
Protected against solid
objects of 12,5 mm (.492)
and greater
3
Protected against solid
objects of 2,5 mm (.098)
and greater
4
Protected against solid
objects of 1 mm (.039)
and greater
5
Dust-protected (no harmful
ingress)
6
Dust-tight (no ingress)
2nd number : protection against liquids
IP
0
1
tests
Protected against vertically
falling water drops when
enclosure tilted up to 15°
Protected against water
sprayed vertically at an
angle up to 60°
2
3
Protected against splashing
water
4
Protected against water
jets from any direction
5
Packaging unit : 20 or 40 pieces depending on models, except AV..4700 (10 pieces), AV06 (60 pieces), AV22P, AV22L and
AV24L with anodised plunger (16 pieces).
Mounting accessories : Standard and special hardware are presented in section N.
AV SERIES PUSHBUTTON SWITCHES
Distinctive features
K-3
K
APEM
The AV series is a large range of security pushbutton switches including 4 product
families :
ANTI-VANDAL PUSHBUTTON SWITCHES (page K-4)
• Increased impact resistance
provided by a nut or mechanical stop
• Stainless steel actuator and bushing
SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR (page K-7)
• Ergonomic actuator
dia. 20 mm (.787)
or 30 mm (1.181)
• Tactile feedback
• Up to 5A 250VAC
OTHER SECURITY PUSHBUTTON SWITCHES (page K-10)
• A large variety of
actuator shapes,
electrical functions,
connections,
finish and marking options
SNAP-ACTION SECURITY PUSHBUTTON SWITCHES (page K-15)
• Tactile feedback
• Illuminated or non-illuminated
AV SERIES
ANTI-VANDAL PUSHBUTTON SWITCHES
Distinctive features and specifications
K-4
K
APEM
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 2A 48 VDC
• Initial contact resistance : 10 mΩmax. at 1A 2V
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
•Electrical life : 10.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing : stainless steel
• Actuator : stainless steel
CUT-OUTS
• Panel cut-out :
Ø 19,2 mm (.755)
or Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
ROBUSTNESS
Model Ø 19 mm (.748) Model Ø 22 mm (.866)
Impacts on actuator
according to
CECC 96000
Hammer radius 10 mm
0.3 Kg
34 cm
10 strokes
Striking energy:
1 joule (1Nm)
10 strokes
Striking energy:
5 joules (5Nm)
34 cm
1.5 Kg
Degree of protection
according to
EN 50102, June 95
(NFC 20-015) Hammer radius 25 mm Hammer radius 50 mm
IK08
Striking energy:
5 joules
(5Nm)
1.7 Kg
29.5 cm
IK10
Striking energy
:
20 joules
(20Nm)
5 Kg
40 cm
❑ Increased impact resistance provided by a nut
or mechanical stop
❑ Stainless steel actuator and bushing
K-5
K
APEM
AV SERIES
ANTI-VANDAL PUSHBUTTON SWITCHES
Bushing Ø 19 (.748)
NO
(function 3)
Flat actuator - AV09..40N Hex nut 22 (.866) across flats
7.30
(.287)
2.00
(.078) (.374)
9.50 6.50
(.255) (.118)
3.00
ø19.00x1.00 SI
(.748DIAx1.00 IS)
3.00
(.118)
(.866DIA)
ø22.00
ø15.00
(.590DIA)
(.866DIA)
(.098DIA)
ø22.00
ø2.50
(.196)
5.00
EPOXY
2.80x0.5
(.110x.019)
1.20
(.047)
2.80
(.110)
Screw terminals
AV091003C940N
Solder lug /
quick-connect term.
AV091003C240N
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
material Terminal
type Bush./act.
material Sealing
AV
09
19
9D
100 3 C
9
2
40
N
T
Curved actuator
Screw terminals
AV191003C940N
Solder lug / quick-connect terminals
AV191003C240N
Flush model
Screw terminals
AV9D1003C940N
Solder lug / quick-connect terminals
AV9D1003C240N
OTHER CONFIGURATIONS
BASIC MODEL
(.078)
(.590DIA)
(.866DIA)
2.00
Ø15.00
Ø22.00
(.141)
3.60
(.866DIA)
Ø22.00
(.047)
1.20
(.874DIA Min.)
(.755DIA)
Ø19.20
Ø22.20 Mini
(.051 Min.)
1.30 Mini
SEALING
To order a sealed product, replace N
with T at the end of above part numbers.
TFront panel sealing (IP65)
1
2
➀internal gasket
➁external gasket
Robustness : see ”Specifications” page.
AV SERIES
ANTI-VANDAL PUSHBUTTON SWITCHES
Bushing Ø 22 (.866)
K-6
K
APEM
Flat actuator - AV03..40N Hex nut 25 (.984) across flats
(.098DIA)
ø2.50
ø22.00x1.00 SI
(.866DIAx1.00 IS)
5.00
(.196)
6.30
(.248)
(.500)
12.70
3.00
(.118)
(.078)
2.00
ø15.00
(.59DIA)
ø25.00
(.984DIA)
EPOXY
2.80x0.5
(.110x.019)
(.110)
2.80
(.287)
7.30
(.047)
1.20
Screw terminals
AV031003C940N
Solder lug /
quick-connect term.
AV031003C240N
Curved actuator
Screw terminals
AV021003C940N
Solder lug / quick-connect term.
AV021003C240N
Flatted bushing
Flat actuator
Screw terminals
AVM31003C940N
Curved actuator
Screw terminals
AVM21003C940N
OTHER CONFIGURATIONS
(.984DIA)
Ø25.00
(.590DIA)
Ø15.00
(.393
10.00
Ø22.20
(.874DIA)
)
NO
(function 3)
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
material Terminal
type Bush./act.
material Sealing
AV
03
02
M3
M2
100 3 C
9
2
40
N
T
BASIC MODEL
SEALING
To order a sealed product, replace N
with T at the end of above part numbers.
TFront panel sealing (IP65)
1
2
➀internal gasket
➁external gasket
Robustness : see ”Specifications” page.
Combined NC/NO
K-7
K
APEM
AV SERIES
SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR
Bushing Ø 22 (.866)
Recessed actuator
AV22LC402
Curved actuator
AV22LB402
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 1.000.000 cycles at 1A 250VAC
100.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 3.000.000 cycles
• Front panel sealing : IP65
MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing : stainless steel (std)
• Actuator : stainless steel (std)
CUT-OUT
• Panel cut-out : Ø 22,2 (.874)
or Ø 24,2 (.952)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
ORDER FORMAT
Series Bushing
diameter Bush./act.
config. Actuator
style Bush./act.
matl Contact/
terminals
AV 22
P
B
C
2
4
See next page.
L40
Flat actuator - solder lug terminals - AV22LP Hex nut 25 (.984) across flats
(.118)
3.00
4.00
(.157)
0.50
(.019)
(1.023DIA)
Ø26.00
(.787DIA)
Ø20.00
29.00
(1.142)
(.492)
12.50
Ø22.00x1.00 SI
(.094)
(.055)
1.40
(.866DIAx1.00 IS)
2.40
AV22LP402
BASIC MODEL
OTHER CONFIGURATIONS
All model numbers below are for switches with standard bushing/actuator material.
➞O-ring
4
AV SERIES
SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR
Bushing Ø 24 (.944) - low profile
K-8
K
APEM
Curved actuator
AV24LB402
Recessed actuator
AV24LC402
Flat actuator - solder lug terminals - AV24LP Hex nut 27 (1.062) across flats
(1.213)
Ø20.00
(.787DIA)
(1.181DIA)
(.051)
1.30 (.157)
4.00
Ø30.00
(.559)
14.20
30.80
(.944DIAx1.00 IS)
Ø24.00x1.00 SI
0.50
(.019)
1.40
(.055)
(.094)
2.40
AV24LP402
BASIC MODEL
OTHER CONFIGURATIONS
Models with non-anodized actuator
CODE BUSHING ACTUATOR
40 (standard) Stainless steel Stainless steel
20 Chrome plated brass Chrome plated brass
Models with anodized actuator
CODE BUSHING ACTUATOR COLOUR
1•Black chrome plated brass
2•Chrome plated brass
4• Stainless steel
2 (standard) NC/NO, solder lug terminals
4NC/NO, quick-connect terminals
BUSHING/ACTUATOR MATERIAL
CONTACT / TERMINALS
Replace • with
colour code
opposite.
Colours
2: black
3: pale green
5: gold yellow
6: red
For non-standard material, replace 40 with one of the following codes.
➞O-ring
ø1.40
(.055 DIA)
(.110)
2.80
4
Combined NC/NO
K-9
K
APEM
AV SERIES
MUSHROOM HEAD SECURITY PUSHBUTTON SWITCHES
Bushing Ø 22 (.866)
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 1.000.000 cycles at 1A 250VAC
100.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
• Front panel sealing : IP65
MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing : brass, nickel plated
•
Actuator : aluminium, anodized
CUT-OUT
• Panel cut-out : Ø 22,2 (.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
ORDER FORMAT
Series Bushing
diameter Bush./act.
config. Actuator
colour Contact/
terminals
AV 22
2
3
4
5
6
2
4
PNA
Solder lug terminals - red actuator - AV22PNA Hex nut 25 (.984) across flats
(O-ring)
ø30.00
10.80
(.425)
(1.181DIA)
4.00
(.157)
(.866DIAx1.00 IS)
(.019)
0.50
ø22.00x1.00 SI
(.334)
Joint
25.00
(.984)
8.50
(.094)
2.40
(.055)
1.40
AV22PNA62
BASIC MODEL
2:black - 3 : green - 4 : grey - 5: yellow - 6: red
ACTUATOR COLOUR
2 (standard) NC/NO, solder lug terminals
4NC/NO, quick-connect terminals
CONTACT / TERMINALS
ø1.40
(.055 DIA)
(.110)
2.80
AV SERIES
SECURITY PUSHBUTTON SWITCHES
Bushing Ø 16 (.629)
K-10
K
APEM
Curved actuator w. chamfer
AV0830C900
Curved actuator
AV1630C900
3.00
1.50
(.059)
(.118)
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load :
200mA 48 VDC - 100mA 48VDC
• Initial contact resistance : 50 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 50.000 cycles at 200mA 48VDC
100.000 cycles at 100mA 48VDC
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing and actuator :
- nickel plated brass (std), code 00
- stainless steel, option 40
CUT-OUT
• Panel cut-out :
Ø 16,2 (.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
ORDER FORMAT
Series Bush./act.
config. Function Case
style Contact
matl. Term.
type Bush./act.
material
See ”options” page.
K00
40
Sealing
AV
06
16
08
3 0 C 9
Flat actuator - screw terminals - AV06 Hex nut 19 (.748) across flats
(.708DIA)
ø18.00
(.374)
9.50
1.50
(.059)
ø12.00
(.472DIA)
(.440)
11.20
(.118)
3.00 (.118)
3.00
(.098DIA)
(.629DIAX1.00 IS)
ø16.00X1.00 SI
ø2.50
AV0630C900
BASIC MODEL
OTHER CONFIGURATIONS
(.059)
1.50
(.078)
2.00
All model numbers below are for switches with standard bushing/actuator material, without marking.
K-11
K
APEM
AV SERIES
SECURITY PUSHBUTTON SWITCHES
Bushing Ø 19 (.748)
NO
(function 3)
Flat actuator - AV09..00 Hex nut 22 (.866) across flats
(.748DIAx1.00 IS)
(.531)
ø22.00
(.590DIA)
(.866DIA)
ø15.00
(.078)
2.00
(.098DIA)
(.216)
5.50
13.50
(.196)
5.00
ø2.50
(.118)
3.00
ø19.00x1.00 SI
EPOXY
2.80x0.5
(.110x.019)
1.20
(.047)
2.80
(.110)
7.30
(.287)
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 2A 48 VDC
• Initial contact resistance : 10 mΩmax. at 1A 2V
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
•Electrical life : 10.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
Screw terminals
AV091003C900
Solder lug /
quick-connect term.
AV091003C200
OTHER CONFIGURATIONS
Curved actuator
Screw terminals
AV191003C900
Solder lug / quick-connect terminals
AV191003C200
With knurled nut for matrix mounting 25 (.984) x 25 (.984)
Flat actuator, screw term. Curved actuator, screw term.
AV9P1003C900 AV9B1003C900
Flat actuator, solder lug term. Curved act., solder lug term.
AV9P1003C200 AV9B1003C200
Wrench available
under P/N U1929.
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated
(std)
CUT-OUT
• Panel cut-out :
Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
Ø15.00
(.590DIA)
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
(.177)
4.50
(.866DIA)
Ø22.00
25.00
25.00 25.00
(.984)
(.984)
(.984)
4.50
(.177)
(.078)
(.590DIA)
(.866DIA)
2.00
Ø15.00
Ø22.00
(.141)
3.60
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material
See ”options” page.
Marking Sealing
AV
09
19
9P
9B
100 3 C
9
2
00
K
BASIC MODEL
All model numbers below are for switches with standard bushing/actuator material, without marking.
AV SERIES
SECURITY PUSHBUTTON SWITCHES
Bushing Ø 22 (.866)
K-12
K
APEM
Flat actuator - AV03..00 Hex nut 25 (.984) across flats
(.098DIA)
ø2.50
ø22.00x1.00 SI
(.866DIAx1.00 IS)
5.00
(.196)
6.30
(.248)
(.500)
12.70
3.00
(.118)
(.078)
2.00
ø15.00
(.59DIA)
ø25.00
(.984DIA)
EPOXY
2.80x0.5
(.110x.019)
(.110)
2.80
(.287)
7.30
(.047)
1.20
Screw terminals
AV031003C900
Solder lug /
quick-connect term.
AV031003C200
Curved actuator
Screw terminals
AV021003C900
Solder lug / quick-connect terminals
AV021003C200
3.60
(.141)
(.078)
2.00
Ø15.00
(.590DIA)
Ø25.00
(.984DIA)
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 2A 48 VDC
• Initial contact resistance : 10 mΩmax. at 1A 2V
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
•Electrical life : 10.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated
(std)
CUT-OUTS
• Panel cut-out :
Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material Marking Sealing
AV
03
02
M3
M2
100 3 C
9
2
00
K
BASIC MODEL
OTHER CONFIGURATIONS
Flatted bushing
Flat actuator
Screw terminals
AVM31003C900
Curved actuator
Screw terminals
AVM21003C900
(.984DIA)
Ø25.00
(.590DIA)
Ø15.00
(.393
10.00
Ø22.20
(.874DIA)
)
All model numbers below are for switches with standard bushing/actuator material, without marking.
See ”options” page.
K-13
K
APEM
AV SERIES
SECURITY PUSHBUTTON SWITCHES
Bushing Ø 19 (.748) or Ø 22 (.866) - other electrical functions
Bushing Ø 22 (.866) - Normally closed (NC) - AV..1200
Bushing Ø 22 (.866) - alternate action - AV..4700
• Single pole, screw terminals, without marking
•Silver plated copper contacts (C)
• Max. current/voltage rating with resistive load :
2A 250VAC - 3A 125VAC - 2,5A 24VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. betw. terminals and frame
2.000 Vrms. 50 Hz min. between terminals
•Electrical life : 100.000 cycles at 0,3A 24VAC or DC
10.000 cycles at full load
• Further specifications : see previous page.
Flat actuator Curved actuator
AV031202C00 AV021202C00
• Double pole, solder lug/quick-connect term., curved actuator
•Silver contacts
• Max. current/voltage rating with resistive load :
3(1,5)A 250VAC - 6A 125VAC - 3A 24VAC or DC
• Dielectric strength : 3.000 Vrms min. between terminals
and frame
•Electrical life : 10.000 cycles at full load
50.000 cycles at 1A 24VAC or DC
• Mechanical life : 100.000 cycles
• Further specifications : see previous page.
AV044746A200
ON - ON
Bushing Ø 19 (748) - combined NC/NO - AV..9035
(.590DIA)
Ø15.00
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
2.00
(.078)
3.00
(.118)
15.00
(.590)
7.50
(.295)
5.20
(.204)
(.141)
3.60
(.200)
5.08
(.078x.015)
2.00x0.40
(.031)
0.80
(.047)
1.20
Hex nut 22 (.866) across flats
• Single pole, solder lug terminals
• Gold plated silver contacts
•Current/voltage rating with resistive load :
- max. : 1A 30V - min : 10µA 5V
Note : a current above 100mA damages the gold plating.
• Dielectric strength : 1.000 Vrms between terminals
2.000 Vrms between terminals and frame
•Electrical life : 250.000 cycles at full load
• Mechanical life : 1.000.000 cycles
• Further specifications : see previous page.
Flat actuator Curved actuator
AV099035D200 AV199035D200
(.984DIA)
Ø25.00
Ø15.00
(.59DIA)
7.00
(.275)
15.40
(.606)(.551)(.141)
14.003.60
(.59DIA)
Ø15.00
2.00
(.078) (.118)
3.00
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
(.118DIAx.0.50)
Ø3.00x0.50
13.20
(.519)
Hex nut 25 (.984) across flats
Hex nut 25 (.984) across flats
Ø25.00
(.984DIA)
(.551)
(.141)
14.00
3.60
(.59DIA)
Ø15.00
1.60
(.063) (.118)
3.00
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
(.811)
20.60 7.20
(.283)
5.80
(.228)
8.40
(.330)
0.50x2.80
(.019x.110)
Bushing/actuator materials, marking and sealing : see ”options” on next page.
AV SERIES
SECURITY PUSHBUTTON SWITCHES
Options
K-14
K
APEM
Models with flat or curved metal actuator
CODE BUSHING ACTUATOR
00 (standard) Nickel plated brass Nickel plated brass
10 Nickel plated brass Stainless steel
12 Nickel plated brass Chrome plated brass
20 Chrome plated brass Chrome plated brass
30 Chrome plated brass Stainless steel
80 Varnished polished brass Varnished polished brass
Models with flat thermoplastic actuator
CODE BUSHING ACTUATOR COLOUR
0•(standard) Nickel plated brass
2•Chrome plated brass
8• Varnished polished brass
BUSHING/ACTUATOR MATERIAL
Replace • with
colour code
opposite.
Colours
1: blue
2: black
3: green
4: grey
5: yellow
6: red
7/1: white
9: orange
For flat or curved actuator.
Not available on model AV031202C00.
- by engraving on brass actuator
(stainless steel on request)
- by hot stamping on thermoplastic
actuator.
COLOUR OF MARKING
CODE COLOUR
Brass actuator
0 (standard) Same as finish
2Black
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
Thermoplastic actuator
2Black
7White
TYPE OF MARKING
CODE TYPE
0 to 9 Numbers 0 to 9
XSymbol *
YSymbol #
A to N Letters A to N
P to W Letters P to W
0Letter O
Letter O : same code and same design as
number 0.
For special symbols, consult factory.
Minimum order : 500 pieces
(0.059)
1.50
(0.314)
8.00
(0.590DIA)
Ø15.00
MARKING Select an option from each of the two tables below.
For non-standard material, replace 00 with one of the following codes.
After selecting basic model number,
fill in last 3 boxes
with desired options.
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material Marking Sealing
AV
KFront panel sealing (IP65)
1
2
1
2
SEALING
➀elastomer membrane
➁external gasket
➀internal gasket
➁external gasket
Blank No sealing
For types with bushing Ø 19 or Ø 22
KFrontal panel sealing (IP65)
For types with bushing Ø 16
AV SERIES
SNAP-ACTION SECURITY PUSHBUTTON SWITCHES
Bushing Ø 19 (.748) - Illuminated or not
K-15
K
APEM
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : Two-colour LED 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
(a resistor must be series-connected by the user)
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and bushing
•Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N +/-2N
• Travel : 0,7 mm (.027) +/- 0,1 mm (.003)
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Soldering : 270°C max. during 3 sec.
Flat actuator - solder lug terminals - non-illuminated Hex nut 22 (.866) across flats
AV09C703D200
Also available with curved actuator :
AV19C703D200
Flat actuator - solder lug terminals - illuminated
AV09C7L3D200
MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated (std)
• LED
CUT-OUTS
• Panel cut-out :
Ø 19,2 mm (.755)
•
Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
(.031)
0.80
5.08
(.200)
1.80
(.070)
1 2
(.074)
1.90
(.153)
3.90
(.043)
1.10
Ø19.00x1.00 SI
3.00
Ø22.00
Ø15.00
2.00
13.50
(.866DIA)
(.590DIA)
(.748DIAx1.00 IS)
(.118)
(.078)
(.531)
(.163)
4.15
(.531)
(.078) (.118)
(.748DIAx1.00 IS)
(.590DIA)
(.866DIA)
13.50
2.00
Ø15.00
Ø22.00
3.00
Ø19.00x1.00 SI
1.10
(.043)
3.90
(.153)
4.15
(.163)
1.90
(.074)
21
(.070x.031)
1.80x0.80
(.200)
5.08
(.393DIA)
Ø10.00
(.480)
12.20
(.023x.070)
0.60x1.80
ORDER FORMAT
Series Bush./act.
config. Case
style Funct.Illum.
or not Contact
matl. Term.
type Bush./act.
material MarkingLED
colour Seal.
AV 00
09
19 L
0
C7 3 D 2 2
K
See ”options” on next page.
All model numbers below are for switches with standard bushing/actuator material, without marking.
Hex nut 22 (.866) across flats
AV SERIES
SNAP-ACTION SECURITY PUSHBUTTON SWITCHES
Options
K-16
K
APEM
Non-illuminated models
CODE BUSHING ACTUATOR
00 (std) Nickel plated brass Nickel plated brass
10 Nickel plated brass Stainless steel
30 Chrome plated brass Stainless steel
40 Stainless steel Stainless steel
80
Varnished polished brass Varnished polished brass
Illuminated models
CODE BUSHING ACTUATOR
00 (std) Nickel plated brass Nickel plated brass
20 Chrome plated brass Chrome plated brass
40 Stainless steel Stainless steel
45 Stainless steel Nickel plated brass
80
Varnished polished brass Varnished polished brass
Blank No LED
1: Blue - 3- Green - 5- Yellow - 6: Red - 7 : White - 9 : Orange - 2 : Red/green
KFront panel sealing (IP65)
1
2
➀internal gasket
➁external gasket
BUSHING/ACTUATOR MATERIAL
LED COLOUR
For non-standard material, replace 00 with one of the following codes.
Series Bush./act.
config. Case
style Funct.Illum.
or not Contact
matl. Term.
type Bush./act.
material MarkingLED
colour Seal.
AV
For flat or curved actuator.
- by engraving on non-illuminated
brass actuator
(stainless steel on request).
- by hot stamping on thermoplastic
insert ( illuminated actuators)
COLOUR OF MARKING
CODE COLOUR
Non-illuminated actuators
0 (standard) Same as finish
2Black
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
Illuminated actuators
2Black (on white)
TYPE OF MARKING
CODE TYPE
0 to 9 Numbers 0 to 9
XSymbol *
YSymbol #
A to N Letters A to N
P to W Letters P to W
0Letter O
Letter O : same code and same design as
number 0.
For special symbols, consult factory.
Minimum order : 500 pieces
(0.059)
1.50
(0.314)
8.00
Ø10.00
(0.393DIA)
(0.039)
1.00
MARKING Select an option from each of the two tables below.
SEALING
Blank No sealing
After selecting basic model no.,
fill in last 4 boxes
with desired options.