Data Sheet
Part Number 856695
140 MHz SAW Filter
Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. © Page 1 of 6
Features
• For multiple applications
• Usable bandwidth 10 MHz
• Low loss
• High attenuation
• Balanced operation
• Ceramic Surface Mount Package (SMP)
• Hermetic
• RoHS compliant (2002/95/EC), Pb-free
•
Package Pin Configuration
Surface Mount 9.10 x 4.80 x 1.24 mm Bottom View
SMP-35C
9
10
8 7 6
5
4
321
Pin No. Description
9 Input +
10 Input -
4 Output +
5 Output -
1,2,3,6,7,8 Case Ground
9.10
0.69
2.54
1.000.80
2.54
4.80
1.50
1.24 NOM.
1.35 MAX.
Dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall
length and width ±0.10mm
Body: Al
2
O
3
ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0µm,
over a 2 - 6µm Ni plating
Pb
Data Sheet
Part Number 856695
140 MHz SAW Filter
Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. © Page 2 of 6
Electrical Specifications (1)
Operating Temperature Range:
(2)
-40 to +85 °C
Parameter
(3)
Minimum Typical
(5)
Maximum Unit
Center Frequency - 140 - MHz
Minimum Insertion Loss - 10 11.5 dB
Amplitude Variation
135 – 145 MHz
-
0.4
0.9
dB p-p
Phase Linearity
136 – 144 MHz
135 – 145 MHz
-
-
2.0
2.2
6
8
º p-p
º p-p
Average Group Delay
135 – 145 MHz
0.72
0.77 0.82
µs
Relative Attenuation
(4)
10 – 116 MHz
116 – 125 MHz
125 – 127.5 MHz
152.5 – 158 MHz
158 – 177 MHz
177 – 280 MHz
48
40
33
31
35
40
52
45
41
41
45
50
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
Triple Transit Suppression 30 45 - dB
Source Impedance (balanced)
(6)
Load Impedance (balanced)
(6)
-
- 50
50 -
- Ω
Ω
Notes:
1. All specifications are based on the TriQuint matching schematic shown on page 5
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Relative to minimum insertion loss
5. Typical values are based on average measurements at room temperature
6. This is the optimum impedance in order to achieve the performance shown
Data Sheet
Part Number 856695
140 MHz SAW Filter
Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. © Page 3 of 6
Electrical Specifications (1)
Operating Temperature Range:
(2)
-20 to +85 °C
Parameter
(3)
Minimum Typical
(5)
Maximum Unit
Center Frequency - 140 - MHz
Minimum Insertion Loss - 10 11.5 dB
Amplitude Variation
135 – 145 MHz
-
0.4
0.9
dB p-p
Phase Linearity
136 – 144 MHz
135 – 145 MHz
-
-
2.0
2.2
4
8
º p-p
º p-p
Average Group Delay
135 – 145 MHz
0.72
0.77 0.82
µs
Relative Attenuation
(4)
10 – 116 MHz
116 – 125 MHz
125 – 127.5 MHz
152.5 – 158 MHz
158 – 177 MHz
177 – 280 MHz
48
40
33
31
35
40
52
45
41
41
45
50
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
Triple transit suppression 30 45 - dB
Source Impedance (balanced)
(6)
Load Impedance (balanced)
(6)
-
- 50
50 -
- Ω
Ω
Notes:
1. All specifications are based on the TriQuint matching schematic shown on page 5
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Relative to minimum insertion loss
5. Typical values are based on average measurements at room temperature
6. This is the optimum impedance in order to achieve the performance shown
Data Sheet
Part Number 856695
140 MHz SAW Filter
Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. © Page 4 of 6
Typical Performance (at room temperature)
Data Sheet
Part Number 856695
140 MHz SAW Filter
Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. © Page 5 of 6
Matching Schematic
Actual matching values may vary due to PCB layout and parasitics
50 Ω
Balanced
Input
1,2,3
6,7,8
50Ω
ΩΩ
Ω18pF
9
10
4
5
50 Ω
ΩΩ
Ω
27nH
27nH
27nH
27nH
18pF
50 Ω
Balanced
Output
Marking PCB Footprint
ID Dot Date Code
JJJYHH
856695
TriQuint
9.29
1.19
1.01
1.70
5.00
3.55
1.53 1.01
1.19
The date code consists of: day of the current year (Julian,
3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only
Dimensions shown are nominal in millimeters
Tape and Reel
5.1 8.0
Ø1.5
4.0
2.0
0.3
1.6
Section A-A
9.4
A1.75
7.516.0
A
Ø1.5
ID dot
2.0
Ø13.0
Ø20.2
Ø102
2.7 16.8 Ø330
Direction of travel
Dimensions shown are nominal in millimeters
Packaging quantity: 4000 units/reel
Data Sheet
Part Number 856695
140 MHz SAW Filter
Subject to change or obsolescence without notice Rev B 09-07 TriQuint Semiconductor, Inc. © Page 6 of 6
Maximum Ratings
Parameter Symbol Minimum Maximum Unit
Operating Temperature Range T -40 +85
o
C
Storage Temperature Range T
stg
-55 +125
o
C
Pyroelectric Voltage V
Pyro
- 50 mV p-p
Input Power P
in
- +20 dBm
Important Notes
Warnings
• Electrostatic Sensitive Device (ESD)
• Avoid ultrasonic exposure
RoHS Compliance
• This product complies with EU directive 2002/95/EC (RoHS)
Solderability
• Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature
(see soldering profile)
Links to Additional Technical Information
PCB Layout Tips Qualification Flowchart Soldering Profile
S-Parameters RoHS Information Other Technical Information
TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability
for applications, processes, circuits or assemblies, which are implemented using any TriQuint compone
nt described in this data sheet.
Contact Information
PO Box 609501
Orlando, FL 32860-9501
USA
Phone: +1 (407) 886-8860
Fax: +1 (407) 886-7061
Email: info-product@tqs.com
Web: www.triquint.com
Or contact one of our worldwide
Network of sales offices,
Representatives or distributors
Pb
