© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 1
One world. One KEMET
Benets
Rated voltage: 125 VAC/250 VDC, 50/60 Hz
Capacitance range: 0.1 – 1.0 µF
Capacitance tolerance: ±20%
• Resistancerange:22–680Ω
Resistance tolerance: ±30%
Lead spacing: 15.2 – 25.4 mm
Climatic category: 40/085/56/B, IEC 60068–1
Tape and reel packaging in accordance with IEC 60286–2
RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-4Cto+85˚C
Overview
The PMR205 Series is constructed of multilayer metallized
paper encapsulated and impregnated in self-extinguishing
material meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use in contact
protection, contact interference suppression and transient
suppression.
AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper,
125 VAC/250 VDC
Legacy Part Number System
PMR205 A B 6100 M033 R30
Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance
Code (pF)
Capacitance
Tolerance Resistance(Ω) Packaging
RC Snubber,
Metallized Paper
A = 125 B = 15.2
C = 20.3
E = 25.4
The last three
digits represent
signicantgures.
Therstdigit
speciesthetotal
number of digits.
M = ±20% Resistance Value
inΩ
See Ordering
Options Table
New KEMET Part Number System
P405 QE104 M125 A H330
Capacitor
Class Series Lead Spacing
(mm) Size Code Capacitance Code (pF) Capacitance
Tolerance
Rated Voltage
(VAC) Packaging Resistance(Ω)
P =
Metallized
Paper
RC Snubber Q = 15.2
C = 20.3
E = 25.4
See
Dimension
Table
First two digits
representsignicant
gures.Thirddigit
speciesnumberof
zeros.
M = ±20% 125 = 125 See Ordering
Options Table
Hplusrsttwo
digits represent
signicant
gures.Thirddigit
speciesnumber
of zeros.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 2
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Benets cont'd
Excellent self-healing properties which ensure long life
even when subjected to frequent over voltages
Good resistance to ionization due to impregnated paper
dielectric
High dV/dt capability
Impregnated paper ensures excellent stability and
reliability properties, particularly in applications with
continuous operation
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
15.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H
0
= 18.5
+/-0.5
LR19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H
0
= 18.5
+/-0.5
PR19T1
20.3
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H
0
= 18.5
+/-0.5
LR19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H
0
= 18.5
+/-0.5
PR19T1
25.4
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/-1
C
R06
Bulk (Tray) – Max Length Leads
30+5/-0
A
R30
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 3
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Dimensions – Millimeters
L B
FRONT VIEW SIDE VIEW
H
LL
p
d
Size Code p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
15.2
+/-0.4
5.2
Maximum
10.5
Maximum
18.5
Maximum
0.8
+/-0.05
15.2
+/-0.4
7.3
Maximum
13.0
Maximum
18.5
Maximum
0.8
+/-0.05
15.2
+/-0.4
7.8
Maximum
13.5
Maximum
18.5
Maximum
0.8
+/-0.05
20.3
+/-0.4
7.6
Maximum
14.0
Maximum
24.0
Maximum
0.8
+/-0.05
20.3
+/-0.4
9.0
Maximum
15.0
Maximum
24.0
Maximum
0.8
+/-0.05
20.3
+/-0.4
11.3
Maximum
16.5
Maximum
24.0
Maximum
0.8
+/-0.05
25.4
+/-0.4
10.6
Maximum
16.1
Maximum
30.5
Maximum
1.0
+/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 4
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Performance Characteristics
Rated Voltage 125 VAC 50/60 Hz
Capacitance Range 0.1 – 1.0 µF
Capacitance Tolerance ±20%
Resistance Range 22–680Ω
Resistance Tolerance ±30%
Temperature Range -4Cto+85°C
Climatic Category 40/085/56/B
Peak Pulse Voltage 375 V
Series Resistance
Theseriesresistanceisdenedat1kHzforRC≥50µsandat
100 kHz for RC < 50 µs
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥3,000M
C > 0.33 µF ≥1,000MΩ•µF
Power Ratings
The average losses may reach 0.5 W provided the surface
temperaturedoesnotexceed+85°C.Formaximumpermitted
power dissipation vs. temperature, see Derating Curves.
Derating Curves
Maximum Allowable Power Dissipation vs. Ambient
Temperature and Case Sizes.
ºC
Curve Dimension B (mm)
1
5.2
2
7.3
2
7.8
3
7.6
4
9
5
11.3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 5
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Environmental Test Data
Test IEC Publication Procedure
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s2
Damp Heat Steady State IEC 60068–2–78 Test Cab +4Cand93%RH,56days
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Lead
Spacing (p)
Capacitance
Value (µF)
Resistance
(Ω)
Maximum Dimensions in
mm New KEMET
Part Number Legacy Part Number
B H L
15.2 0.10 33 5.2 10.5 18.5 P405QE104M125(1)H330 PMR205AB6100M033(1)
15.2 0.10 47 5.2 10.5 18.5 P405QE104M125(1)H470 PMR205AB6100M047(1)
15.2 0.10 100 5.2 10.5 18.5 P405QE104M125(1)H101 PMR205AB6100M100(1)
15.2 0.10 220 5.2 10.5 18.5 P405QE104M125(1)H221 PMR205AB6100M220(1)
15.2 0.15 68 5.2 10.5 18.5 P405QE154M125(1)H680 PMR205AB6150M068(1)
15.2 0.15 100 5.2 10.5 18.5 P405QE154M125(1)H101 PMR205AB6150M100(1)
15.2 0.22 47 7.3 13.0 18.5 P405QM224M125(1)H470 PMR205AB6220M047(1)
15.2 0.22 100 7.3 13.0 18.5 P405QM224M125(1)H101 PMR205AB6220M100(1)
15.2 0.22 220 7.3 13.0 18.5 P405QM224M125(1)H221 PMR205AB6220M220(1)
15.2 0.22 330 7.3 13.0 18.5 P405QM224M125(1)H331 PMR205AB6220M330(1)
15.2 0.22 470 7.3 13.0 18.5 P405QM224M125(1)H471 PMR205AB6220M470(1)
15.2 0.25 200 7.3 13.0 18.5 P405QM254M125(1)H201 PMR205AB6250M200(1)
15.2 0.25 350 7.3 13.0 18.5 P405QM254M125(1)H351 PMR205AB6250M350(1)
15.2 0.25 600 7.3 13.0 18.5 P405QM254M125(1)H601 PMR205AB6250M600(1)
15.2 0.33 47 7.8 13.5 18.5 P405QP334M125(1)H470 PMR205AB6330M047(1)
20.3 0.47 22 7.6 14.0 24.0 P405CE474M125(1)H220 PMR205AC6470M022(1)
20.3 0.47 33 7.6 14.0 24.0 P405CE474M125(1)H330 PMR205AC6470M033(1)
20.3 0.47 47 7.6 14.0 24.0 P405CE474M125(1)H470 PMR205AC6470M047(1)
20.3 0.47 68 7.6 14.0 24.0 P405CE474M125(1)H680 PMR205AC6470M068(1)
20.3 0.47 100 7.6 14.0 24.0 P405CE474M125(1)H101 PMR205AC6470M100(1)
20.3 0.47 150 7.6 14.0 24.0 P405CE474M125(1)H151 PMR205AC6470M150(1)
20.3 0.47 220 7.6 14.0 24.0 P405CE474M125(1)H221 PMR205AC6470M220(1)
20.3 0.47 330 7.6 14.0 24.0 P405CE474M125(1)H331 PMR205AC6470M330(1)
20.3 0.47 470 9.0 15.0 24.0 P405CJ474M125(1)H471 PMR205AC6470M470(1)
20.3 0.47 680 11.3 16.5 24.0 P405CP474M125(1)H681 PMR205AC6470M680(1)
25.4 1.0 33 10.6 16.1 30.5 P405EE105M125(1)H330 PMR205AE7100M033(1)
20.3 1.0 47 11.3 16.5 24.0 P405CP105M125(1)H470 PMR205AC7100M047(1)
20.3 1.0 68 11.3 16.5 24.0 P405CP105M125(1)H680 PMR205AC7100M068(1)
20.3 1.0 100 11.3 16.5 24.0 P405CP105M125(1)H101 PMR205AC7100M100(1)
20.3 1.0 150 11.3 16.5 24.0 P405CP105M125(1)H151 PMR205AC7100M150(1)
20.3 1.0 220 11.3 16.5 24.0 P405CP105M125(1)H221 PMR205AC7100M220(1)
Lead Spacing (p) Capacitance
Value (µF) Resistance Ω B (mm) H (mm) L (mm) New KEMET
Part Number Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 6
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering time (sec)
Soldering iron bit temperature (deg C)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave
soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Pleaseconsult
KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline
for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/s
ca 3.5°C/s typical
ca 5°C/s
Cooling
2+3s max
115°C max
T
preh eat
ΔT <150°C
100°C
Preheating
Typical
First wave
Second wave
260°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 7
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 8
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Self-Extinguishing
Resin
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Metallized Impregnated Paper
(First Layer)
Margin
Margin
Metallized Impregnated Paper
(Second Layer)
Resistor (Not Shown)
Integrated into Metallization
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
L
H
LL
d
B
p
R
C
Series Connection
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 9
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Marking
BACKFRONT
TOP
Capacitance Resistance
Voltage
Dielectric Code
Manufacturing
Date Code
Circuit
Diagram
Series
RC Unit
RIFA
Logo
IEC Climatic
Category
Packaging Quantities
Size
Code
Lead
Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Bulk
Long
Leads
Standard
Reel
ø 360 mm
QE 15.2
5.2
10.5
18.5
500
100
600
QM
15.2
7.3
13.0
18.5
400
800
400
QP
15.2
7.8
13.5
18.5
400
800
400
CE
20.3
7.6
14.0
24.0
250
1500
250
CJ
20.3
9.0
15.0
24.0
200
1200
250
CP
20.3
11.3
16.5
24.0
150
1000
180
EE
25.4
10.6
16.1
30.5
150
1000
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 10
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC 60286–2
Lead spacing +6/0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/−0.5 W18 18 18 18 18 18+1/0.5
Hold-down tape width +/−0.3 W
0
912 12 12 12
Position of sprocket hole +/−0.5 W
1
99999 9+0.75/−0.5
Distance between tapes Maximum W
2
33333 3
Sprocket hole diameter +/−0.2 D
0
44444 4
Feed hole lead spacing +/−0.3 P
0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/−0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/−0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/−0 18+2/−0 18+2/−0 18+2/−0 18.5+/−0.5 18+2/−0
Sprocket hole/top of cap body Maximum H
1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 11
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x,R4x+R,R7x,RSB
355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3024_PMR205 • 9/15/2016 12
Film Capacitors – AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
KEMET Electronic Corporation Sales Of ces
Foracompletelistofourglobalsalesofces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.