Rocker Switches 611/621-Series The miniature 611/621-Series switches are double insulated and available in single or double pole. These snap-in mounting style switches are available with paddle, rocker or Visi-Rocker type actuators. A variety of terminations are offered with ratings through 11 amps. International approvals are also available. Specifications *Certifications*: UL, CSA, VDE, TUV, SEMKO, DEMKO, SEV, NEMKO, SETI *Dielectric Strength: 1,000V (minimum) *Insulation Resistance: 100 Megohms (minimum) *Base Material: Nylon *Actuator Material: Nylon * Due to ongoing technological advances, consult factory for certification specifics. .171[4.34] Dimensional Specifications: in. [mm] .825[20.95] .250[6.35] .207[5.26] .590[14.98] .380[9.65] .125[3.18] .080[2.03] END .046[1.17] x .029[.736] CENTER .080[2.03] X .047[1.19] SLOT P.C. (option 2) .892[22.66] .677[17.20] HIGH BARRIER OPTION .843[21.41] TERMINAL TYPE .080 SOLDER LUG .062[1.52] DIA .187 TAB (Q.C) (terminal option 9) functions 1,2 .730[18.54] .507[12.88] P.C. (option 7,8) 6 SERIES 21 1 5 BASE/ACTUATOR COLOR1 6 ACTUATOR STYLE 11 PADDLE 21 CURVED ROCKER 1 2 4 5 BASE BLACK BLACK WHITE WHITE ACTUATOR BLACK WHITE BLACK WHITE POLES 1 2 5 6 SINGLE POLE DOUBLE POLE DOUBLE POLE W/ HIGH BARRIERS SINGLE POLE W/ HIGH BARRIERS PADDLE 9 1 .465[11.81] 9 - 0 - TERMINATION4 1 1 2 3 4 6 7 8 9 2 3 4 9 FUNCTION 1 2 3 6 7 8 ON-NONE-OFF ON-NONE-ON ON-NONE-(ON) ON-OFF-ON ON-OFF-(ON) (ON)-OFF-(ON) .270[6.86] PANEL X Y THICKNESS .030[.762]-.060[1.52] .508[12.90] .756[19.20] .060[1.52]-.093[2.36] .508[12.90] .764[19.40] .093[2.36]-.156[3.96] .508[12.90] .780[19.81] RATING2 .4VA MAX @20V MAX (AC/DC) 2A 250VAC 5A 125VAC RESISTIVE 11A 125VAC H3 4A 250 VAC 8A 125VAC 4A 250VAC 8A 125VAC INDUCTIVE 6(4)A 250VAC T858 .540 [13.72] PC TERMINAL FRONT/BACK MOUNT & MOUNTING PATTERN (terminal option 7,8) functions 1,2 .187 SOLDER LUG (terminal option 6) functions 1,2 .920[23.36] 1.040[26.42] TAB .046[1.17] x .032[.812] .250[6.35] .590[14.98] .380[9.65] .825[20.95] 3 .350[8.89] .120[3.05] DIA .315[8.00] .187[4.74] X .032[.812] .505[12.83] 9 .080 SOLDER LUG PC TERM WIRE LEAD7 WIRE LEAD .187 SOLDER LUG PC BACK MOUNT PC FRONT MOUNT .187TAB (QC) EPOXY SEALED TERMINALS E 0 .185[4.70] PC TERMINAL FRONT MOUNT & MOUNTING PATTERN (terminal option 2) functions 2,3,6,7,8 .080 SOLDER LUG (terminal option 1) functions 2,3,6,7,8 .877[22.27] .200[5.08] .062[1.57] DIA MIN EPOXY NONE REQUIRED - +.000[.00] -.004[.10] Y +.004[.10] -.000[.00] X TEST CUT HOLE IN ACTUAL MATERIAL V ROCKER FACE LEGEND MOLDED-IN 5 INK TRANSFER STAMP 6 0 NO LEGEND ON-OFF (VERTICAL) ON-OFF (HORIZONTAL) 8 I-O (HORIZONTAL) 9 I-O (VERTICAL) (indicates ON) (ON ROCKER RADIUS) 0 A B D E F COLOR OF MOLDEDIN LEGEND AND/OR VISI-ROCKER END1 NOTES: Shading indicates standard configurations. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. N 1 Matte finish is standard. Custom colors are available. Consult factory. 2 Rating 1 contact surfaces: gold plate over nickel plate. Rating Code 9 available with function 1 or 2 only. B 3 Available in single pole with high barriers, ON-NONE-OFF circuit with .187TAB terminals only. V 4 Terminations 1, 2 and 3 are not available with function 1. Terminations 4, 6, 7 , 8 and 9 are available with function 1 or 2 only. 5 Molded-in Legend available only with Visi-Rocker Option. W 6 White is standard with dark actuators; black is standard with light actuators. 7 Termination 3 available with rating 2 only - 18 gauge wire used. 8 Rating 9 using Termination 1 or 2 is rated T55 only. NOT APPLICABLE BLACK VISI-RED WHITE Carlingswitch,Inc. (860) 793-9281* Carlingswitch, LTD. Int + 44 1392-364422 * Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 31