31
Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277
V09--199-62115
BASE/ACTUATOR
COLOR1
BASE ACTUATOR
1BLACK BLACK
2BLACK WHITE
4WHITE BLACK
5WHITE WHITE
POLES
1SINGLE POLE
2DOUBLE POLE
5DOUBLE POLE W/
HIGH BARRIERS
6SINGLE POLE W/
HIGH BARRIERS
611/621-Series
Rocker Switches
Dimensional Specifications: in. [mm]
The miniature 611/621-Series switches
are double insulated and available in
single or double pole. These snap-in
mounting style switches are available
with paddle, rocker or Visi-Rocker type
actuators. A variety of terminations are
offered with ratings through 11 amps.
International approvals are also
available.
Specifications
•Certifications*: UL, CSA, VDE, TUV,
SEMKO, DEMKO, SEV, NEMKO,
SETI
•Dielectric Strength: 1,000V (minimum)
•Insulation Resistance: 100 Megohms
(minimum)
•Base Material: Nylon
•Actuator Material: Nylon
* Due to ongoing technological advances, consult factory for
certification specifics.
SERIES
6
ACTUATOR STYLE
11 PADDLE
21 CURVED ROCKER
TERMINATION4
1.080 SOLDER LUG
2PC TERM
3WIRE LEAD7
4WIRE LEAD
6.187 SOLDER LUG
7PC BACK MOUNT
8PC FRONT MOUNT
9.187TAB (QC)
EPOXY SEALED
TERMINALS
EEPOXY
0NONE REQUIRED
RATING2
1.4VA MAX @20V
MAX (AC/DC)
22A 250VAC
5A 125VAC
RESISTIVE
311A 125VAC H3
44A 250 VAC
8A 125VAC
94A 250VAC
8A 125VAC
INDUCTIVE
6(4)A 250VAC T858
FUNCTION
1ON-NONE-OFF
2ON-NONE-ON
3ON-NONE-(ON)
6ON-OFF-ON
7ON-OFF-(ON)
8(ON)-OFF-(ON)
.200[5.08]
+.000[.00]
-.004[.10]
TEST CUT
HOLE IN
ACTUAL
MATERIAL
.046[1.17]
x
.029[.736]
DIA MIN
3
.185[4.70]
.756[19.20]
.764[19.40]
.780[19.81]
Y
[13.72]
DIA
.270[6.86]
Y
.877[22.27]
.380[9.65]
.590[14.98]
.380[9.65]
.507[12.88]
.730[18.54]
.590[14.98]
.125[3.18]
.892[22.66]
.080[2.03]
.677[17.20]
TAB
1.040[26.42]
+.004[.10]
-.000[.00]
.062[1.57]
.350[8.89]
.825[20.95]
.920[23.36]
P.C. (option 7,8)
P.C.
(option 2)
.315[8.00]
.187 SOLDER LUG
(terminal option 6)
functions 1,2
.060[1.52]-.093[2.36]
.093[2.36]-.156[3.96]
PANEL
THICKNESS
.030[.762]-.060[1.52]
.250[6.35]
CENTER
X
HIGH
BARRIER
OPTION
.505[12.83]
.250[6.35]
.120[3.05]
DIA .062[1.52] .540
.825[20.95]
END
.187[4.74] X
.032[.812]
.080 SOLDER LUG
.207[5.26]
.046[1.17]
x
.032[.812]
PC TERMINAL FRONT/BACK MOUNT
& MOUNTING PATTERN
(terminal option 7,8) functions 1,2
.508[12.90]
.508[12.90]
X
.508[12.90]
PC TERMINAL FRONT MOUNT & MOUNTING PATTERN
(terminal option 2) functions 2,3,6,7,8
TERMINAL TYPE
.843[21.41]
.171[4.34]
.465[11.81]
.080 SOLDER LUG
(terminal option 1) functions 2,3,6,7,8
.080[2.03] X .047[1.19] SLOT
PADDLE
.187 TAB (Q.C)
(terminal option 9)
functions 1,2
NOTES:
Shading indicates standard configurations.
Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material.
1 Matte finish is standard. Custom colors are available. Consult factory.
2 Rating 1 contact surfaces: gold plate over nickel plate. Rating Code 9 available with function 1 or 2 only.
3 Available in single pole with high barriers, ON-NONE-OFF circuit with .187TAB terminals only.
4 Terminations 1, 2 and 3 are not available with function 1. Terminations 4, 6, 7 , 8 and 9 are available with function 1 or 2 only.
5 Molded-in Legend available only with Visi-Rocker Option.
6 White is standard with dark actuators; black is standard with light actuators.
7 Termination 3 available with rating 2 only - 18 gauge wire used.
8 Rating 9 using Termination 1 or 2 is rated T55 only.
ROCKER FACE
LEGEND
INK
TRANSFER
MOLDED-IN5 STAMP
6
0NO LEGEND 0
ON-OFF
(VERTICAL) A
ON-OFF
(HORIZONTAL) B
8I-O
(HORIZONTAL) D
9I-O
(VERTICAL) E
● (indicates ON)
(ON ROCKER
RADIUS) F
COLOR OF MOLDED-
IN LEGEND AND/OR
VISI-ROCKER END1
NNOT APPLICABLE
BBLACK
VVISI-RED
WWHITE
