PushPull HARTING PushPull HARTING PushPull Technology acc. to IEC 61 076-3-106 variant 4 housing bulkhead mounting for device integration of RJ45-, USB- and Power-jacks Advantages l l Technical characteristics ushPull housing bulkhead mounting with HARTING P PushPull technology Locking PushPull Technology acc. to IEC 61 076-3-106 variant 4 ompact, space-saving design for device C integration of RJ45-, USB-, Signal- or Power-pcb female Shielding fully shielded, 360 shielding contact Mating cycles min. 750 Degree of protection IP65 / IP67 Temperature range -40 C ... +70 C Housing material Plastic, black Zinc die-cast, shining Housing bulkhead mounting EasyInstall l for simple device integration round panel cut out Housing bulkhead mounting Compact l Flammability acc. to UL 94 igh packing density h (spacing 27 x 21 mm) Identification V0 UL approval (E102079) Part number Drawing Dimensions in mm Components device side Housing bulkhead mounting - EasyInstall with integrated seal board drillings for M3 without fixing clip with fixing clip with fixing clip, for all HIFF compatible modules 09 45 545 00301) 09 45 595 00302)4) 09 45 545 00313) 09 45 595 00313)4) 09 45 545 0032 Housing bulkhead mounting - Compact Board drillings for M2.5 02 04 without fixing clip (incl. flat seal) without fixing clip (with integrated seal) 09 45 545 00232) 09 45 545 00332) with fixing clip (incl. flat seal) with fixing clip (with integrated seal) with fixing clip (with integrated seal) for vertical RJ jack 09 45 551 1103 with fixing clip, for all HIFF compatible modules 09 45 545 00213) 09 45 545 00293) 09 45 545 0027 09 45 545 0028 suitable RJ45 jacks: 09 45 551 1100 / ... 1110 / ... 1102 / ... 1103 / ... 1130 / ... 1530 suitable RJ45 jacks: 09 45 551 1100 / ... 1110 / ... 1102 / ... 1130 / ... 1530 3) suitable RJ45 jacks: 09 45 551 1100 / ... 1110 / ... 1102 4) Metal version 1) 2) Panel cut out