The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. 1 mm Pitch, WtoB, Positive Lock Connector DF50 Series Clear tactile click and secure mating Locking A clear click engagement generated when locking starts, matching that of the terminal which comes into contact. (fig1) Resistant to wrenching forces Features 1.Positive lock provides clear tactile click and secure mating Thanks to the structure at the base of the ter minal contacting at the same time as the lock engages, there is a clear tactile click engagement, which enables secure mating.(fig1) 2.Resistant to wrenching forces The thick and durable housing offers enhanced strength against wall breakage. The deep mating and housings pressed against each other also enhance the strength of the structure against stress. 3.Robust and reliable lance structure The crimping terminal receiving the lance on both surfaces helps enhance the lance strength. 4.The adsorption area is secured and no need for any adsorption cap A structure that withstands stresses with deep mating. The thick external wall enhances strength against wall breakage. (fig.2) Robust and reliable lance structure Although compact in size, a sufficient adsorption area is secured and automatic implementation is possible without an adsorption cap. (* Adsorption cap specification is also available on request) The crimping terminal receving the lance on surface 5.Available for coating external diameter 0.9mm, AWG#28 Although a 1mm pitch, it's also compatible with 0.9mm, UL1061-AWG#28 cable (O0.1277) The lance connection can also be visually confirmed. (fig.3) 2010.9 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Specifications Current rating 1A Operating temperature range: Operating humidity range: -35 to +85C (Note 1) RH 20% to 80% Voltage rating 30 Vrms AC 100V AC /DC Storage temperature range: Storage humidity range: -10 to +60C (Note 2) RH 40% to 70% (Note 2) Ratings Item 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance Specification Conditions 500Mo min. 100 V DC No flashover or insulation breakdown 300 Vrms AC / 1 minute 30mo max 20 mV,(DC or 1,000Hz) Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 4.Vibration No electrical discontinuity of 1 s or longer 5.Shock No electrical discontinuity of 1 s or longer 490m/s duration of pulse 11ms at 3 times for 3 directions. 6.Humidity Contact resistance 50 mo max. Insulation resistance: 100 Mo min. 96 hours at of 40 2C, and humidity of 90 to 95% 7.Temperature cycle Contact resistance 50 mo max. Insulation resistance: 500 Mo min. -55C 5 to 35C 85C 5 to 35C Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. 5 cycles 8.Durability Contact resistance 50 mo max. 30 cycles 9.Resistance to soldering heat No deformation of affecting performance Reflow: At the recommended temperature profile Manual soldering: 350C for 3 to 4 seconds 10 cycles in each of the 3 directions. 2 Note 1. Includes temperature rise caused by current flow. Note 2.The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Note 3.Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Product Header 2 Part Material Finish Remarks Insulator LCP Color:Black UL94V-0 Contact Brass Gold plated --------- Metal fittings Phosphor bronze (DF50A) Tin plated --------- Brass(DF50) Tin plated --------- Lock Metal Stainless --------- --------- Socket Insulator PBT Crimping contact Contact Phosphor bronze Color:Black(DF50A) Color:White(DF50) Gold plated UL94V-0 --------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Ordering information lConnector DF50 - * DP - 1 V ** lCrimp contact DF50 - 2830 SCF A Series name : DF50(double-row) DF50A(single-row) Number of positions : 20, 30, 40, 50(double-row) : 2 to 16(single-row) Connector type DP : Double-row header DS : Double-row socket Specifications (51):SMT Embossed tape packaging (52):SMT Embossed tape packaging (with vacuum pick-up cap) Applicable Conductor 2830 : AWG 28 to AWG 30 3032 : AWG 30 to AWG 32(under development) P : Single-row header Plating specification S : Single-row socket A:gold plating Contact pitch:1.0mm Type of housing C : Crimp socket V: Straight SMT H: Right angle SMT(under development) 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Double row straight pin header A B Contact No.2 Contact No. P=1 Contact No.1 Contact No.-1 Contact No.1 mark 7.05 8.15 Contact No.1 0.60.05 P=10.05 1.60.05 0.90.05 Contact No. Contact No.-1 B0.05 40.05 0.85 MIN Contact No.2 1.60.05 1.80.05 0.70.05 Recommended PCB mounting pattern ** : Number of contacts [Specifications number] - * *, (* *) (51) : Embossed tape packaging (52) : SMT Embossed tape packaging (with vacuum pick-up cap) Unit : mm Part Number DF50-20DP-1V (**) CL No. Number of contacts A B Under development 20 13.18 9 DF50-30DP-1V (**) 665-0001-8-** 30 18.18 14 DF50-40DP-1V (**) 665-0005-9-** 40 23.18 19 DF50-50DP-1V (**) Under development 50 28.18 24 Note 1: Tape and reel packaging (1,000 pieces/reel). Order by number of reels. 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Contact No.1 A-A A O1 320.3 O3802 14.20.1 R1 8 0. 1 A 20.1 40.1 (2.395)(Vacuum pick-up area center) 1.750.1 Un reeling direction +2 0 O2 .1 +0 0 5 . O1 Un reeling direction 38.4MAX 32.4 0.5 2 28.40.1 Part number label O801 .75 R0 0.2 .1 +0 0 3 0.20.05 Packaging Specification 120.1 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Single row straight pin header P=1 Contact No.1 Contact No. 5.67 7.05 Contact No.1 mark Recommended PCB mounting pattern Contact No. 0.60.05 Contact No.1 0.450.05 4.70.05 P=10.05 2.40.05 B0.05 ** : Number of contacts [Specifications number] - * *, (* *) (51) : Embossed tape packaging (52) : SMT Embossed tape packaging (with vacuum pick-up cap) 1.90.05 Unit : mm CL No. Number of contacts A B C DF50A-2P-1V (**) Part Number 665-1001-3-** 2 5.25 1 5 DF50A-3P-1V (**) 665-1004-1-** 3 6.25 2 6 DF50A-4P-1V (**) 665-1006-7-** 4 7.25 3 7 DF50A-5P-1V (**) 665-1008-2-** 5 8.25 4 8 DF50A-6P-1V (**) 665-1010-4-** 6 9.25 5 9 DF50A-7P-1V (**) 665-1012-0-** 7 10.25 6 10 DF50A-8P-1V (**) 665-1014-5-** 8 11.25 7 11 DF50A-9P-1V (**) 665-1016-0-** 9 12.25 8 12 DF50A-10P-1V (**) 665-1017-3-** 10 13.25 9 13 DF50A-11P-1V (**) 665-1019-9-** 11 14.25 10 14 DF50A-12P-1V (**) 665-1021-0-** 12 15.25 11 15 DF50A-13P-1V (**) 665-1023-6-** 13 16.25 12 16 DF50A-14P-1V (**) 665-1025-1-** 14 17.25 13 17 DF50A-15P-1V (**) 665-1027-7-** 15 18.25 14 18 DF50A-16P-1V (**) 665-1029-2-** 16 19.25 15 19 Note 1: Tape and reel packaging (1,000 pieces/reel). Order by number of reels. 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Packaging Specification DF50A-2P-1VDF50A-8P-1V(No. of contacts 2 to 8) 1.750.1 120.1 40.1 20.1 A +0.1 0 O801 11.50.1 O13 Un reeling direction 0.2 8 0. 1 O2 R1 (24) 24.4 +20 Part number label 0.5 2 22.25 +0.2 0 30.4MAX O3802 O1.5 Un reeling direction A 20.1 - 28.40.1 14.20.1 6 O13 0. 2 Part number label 38.4MAX 32.4 +20 Un reeling direction R0 8 0. 1 O2 R1 O801 O3802 120.1 40.1 0.5 2 0.20.05 320.3 1.750.1 DF50A-9P-1VDF50A-16P-1V(No. of contacts 9 to 16) .7 5 + 0 0 .1 Un reeling direction 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Double row socket A B Contact No.2 P=1 Contact No. Contact No.1 Contact No.-1 Contact No.1 mark 6 CAV No. HRS mark Unit : mm Part Number DF50-20DS-1C CL No. Number of contacts A B Under development 20 12.28 9 DF50-30DS-1C 665-0003-3-00 30 17.28 14 DF50-40DS-1C 665-0006-1-00 40 22.28 19 DF50-50DS-1C Under development 50 27.28 24 Note 1. The quantity is delivered per bag (1000 pcs.). If needed, please select and order the products per bag. 8 8.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Single row socket A B P=1 Contact No.1 mark Contact No. Contact No.1 6 6.85 Unit : mm CL No. Number of contacts A B DF50A-2S-1C Part Number 665-1002-6-00 2 3.95 1 DF50A-3S-1C 665-1005-4-00 3 4.95 2 DF50A-4S-1C 665-1007-0-00 4 5.95 3 DF50A-5S-1C 665-1009-5-00 5 6.95 4 DF50A-6S-1C 665-1011-7-00 6 7.95 5 DF50A-7S-1C 665-1013-2-00 7 8.95 6 DF50A-8S-1C 665-1015-8-00 8 9.95 7 DF50A-9S-1C 665-1100-5-00 9 10.95 8 DF50A-10S-1C 665-1018-6-00 10 11.95 9 DF50A-11S-1C 665-1020-8-00 11 12.95 10 DF50A-12S-1C 665-1022-3-00 12 13.95 11 DF50A-13S-1C 665-1024-9-00 13 14.95 12 DF50A-14S-1C 665-1026-4-00 14 15.95 13 DF50A-15S-1C 665-1028-0-00 15 16.95 14 DF50A-16S-1C 665-1030-1-00 16 17.95 15 Note 1. The quantity is delivered per bag (1000 pcs.). If needed, please select and order the products per bag. 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Crimping Contact 0.5 4 O1.2 3 4.6 1.9 5.05 0.8 0.63 1.4 0.12 2.7 4 Unit : mm CL No. Packaging type Quantity Finish DF50-2830SCFA Part Number 665-0002-0-00 Reel (30,000/Reel) Gold plated DF50-3032SCFA Under development - - - Note 1: Tape and reel packaging (30,000 pieces/reel). Order by number of reels. lRecommended Cable lApplicable Cable (Tin Plating Annealed Copper Wire) Conductor Size (Wire construction) UL1061 Jacket diameter AWG28 (7/O0.127mm) O0.88mm AWG30 (7/O0.102mm) O0.80mm lStrip Length 1.5~1.9mm Note : If other cables are used instead of the applicable cable, please contact the Hirose sales department. Applicable Crimping Tool Type Applicator Press main unit Manual crimping tool Extraction tool Part Number CL No. Applicable contact AP105-DF50-2830S 901-4616-0 DF50-2830SCFA CM-105 901-0005-4 - HT305/DF50-2830HC 550 DF50-2830SCFA DF-C-PO (B) 550-0179-2 DF50-2830SCFA Note 1. If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product. 10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. DF50 Series1 mm Pitch, WtoB, Positive Lock Connector Usage Recommendations 1.Recommended temperature profile 10secMAX MAX 250c 250 TEMPERATURE (c) 220c 200 180c 150 100 0 90~120sec PRE-HEATING TIME 60secMAX TIME (sec) SOLDERING TIME Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 2.Recommended manual soldering Manual soldering: 350c10c for 3 to 4 seconds 3.Recommended screen thickness and open area ratio (Pattern area ratio) Standard thickness 0.1mm Open area ratios:100% 4.Board warpage Maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5.Cleaning conditions 6.Precautions Refer to "Nylon Connector Use Handbook". Mating and un-mating of the connectors when not soldered on the boards is not recommended as this may cause deformation of the terminals, damage to the contacts or insulators. When mating/un-mating do not twist or lift by the corners. Apply the forces evenly across the entire length and width of the connectors taking care NOT to damage or deform soldered terminations. Slight discoloration on the insulating materials will not affect form, fit or function of the connectors. 11