PT Tubular Key Cam Locks 170 Fixed core * 7-pin tumbler lock security * Keyed alike, keyed differently or custom key code options * Cams sold separately Non-Sealed Pin Tumbler Material and Finish Stud length Q Door thickness Door D H Housing Frame length Cam grip Frame Cam forward Straight cam Cam reversed Zinc alloy, chrome plated Performance Details Series Average ultimate load on cam: MINATURE ACTUAL 645 N (145 lbf) SIZE Standard STANDARD ACTUAL SIZE Accessories See page 169 Series Installation Notes Standard 1. Install mounting nut and tighten to 5 Nm (44 inlbf) Max. Q D 6.8 (.27) O 22 (.87) Installation X Y Z 16.26 - 16.36 (.640 - .644) O 190.2 (.75.007) 192 (.75.08) Housing 2. Install cam to assembly. Properly orient for rotation and grip. 3. Install lockwasher and cam mounting nut. Tighten to 2 Nm (18 inlbf). Non-Sealed Pin Tumbler Door X Door Mounting nut Frame Cam Y Z Lockwasher Cam mounting nut (Or screw for minature size) Max. door thickness (see table) Part Number Selection ________________________________________________________________________________ See table R Rotation 01 Clockwise 09Counter-clockwise Lock part number (no cam) Order lock and cam separately Cam page 171 Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/PT S Size 1 Standard K Key removal B Locked / unlocked removal L Locked removal only PT - 1 - H C 1 R - 20 K - KC H Housing Length Number Housing Length Stud Length Max. Door Thickness 1 12.7 (.50) 8.9 (.35) 5.1 (.20) 2 17.5 (.69) 9.5 (.37) 10.9 (.43) 3 23.8 (.94) 9.5 (.37) 15.9 (.63) 4 30.5 (1.20) 9.5 (.37) 22.9 (.90) 5 36.5 (1.44) 9.5 (.37) 28.9 (1.14) Dimensions in millimeters (inch) unless otherwise stated KC Key Code KAKeyed alike T0001 (2 keys supplied) KDKeyed differently 50 key codes (T0001 to T0050) provided in a non-master key system (2 keys supplied) PT Tubular Key Cam Locks 171 Cams & installation Installation Material Standard Cam Grip Max. Door Thickness Housing Length Number 19.0 (.75) 15.9 (.63) 12.7 (.50) 9.5 (.38) 6.4 (.25) 5.1 (.20) 1 23.8 (.94) 20.7 (.81) 17.5 (.69) 14.3 (.56) 11.2 (.44) 10.9 (.43) 2 30.1 (1.19) 27 (1.06) 23.8 (.94) 20.6 (.81) 17.5 (.69) 15.9 (.63) 3 36.8 (1.45) 33.7 (1.33) 30.5 (1.20) 27.3 (1.08) 24.2 (.95) 22.9 (.90) 4 42.8 (1.69) 39.7 (1.56) 36.5 (1.44) 33.3 (1.31) 30.2 (1.19) 28.9 (1.14) 5 Cam Part Number Cam Reversed Straight Cam Type Cam Forward PT-T409 PT-T209 PT-T009 PT-T209 PT-T409 No Hook PT-W409 PT-W209 PT-F009 PT-F209 PT-F409 Left PT-F409 PT-F209 PT-F009 PT-W209 PT-W409 Right Also use the online configurator at www.southco.com C Offset C Offset Cam Styles C Offset C Offset C Offset C Offset C C 28.6 (1.13) 28.6 (1.13) A A 28.6 (1.13) 28.6 (1.13) B B S F - Hook type 1 S F - Hook type 1 S T - No hook S T - No hook 1. In the TAN section, locate the cam grip calculated for your application. If your grip falls between two values, use the higher value. Notes: For cam grips that can be achieved with multiple housing lengths, use the value that results in the shortest housing possible based on the Max. door thickness allowed. 2. From this value, move right horizontally into the Gray section and verify your door thickness falls within the Max. door thickness listed. Once this is verified, the housing length is selected and is illustrated by the housing length number. 3. Returning to your original grip value in the TAN section, move down vertically into the GREEN section. The GREEN section illustrates the cams that are appropriate for your grip. 4. By determining the required cam orientation and style in the BLUE section, the appropriate cam for your application is selected. S W - Hook type 2 S W - Hook type 2 ___________________________________________________________________________ Part Number Selection See table S Cam Style T No hook F Hook type 1 W Hook type 2 Series Standard C Cam Offset 0 No offset 2 3.2 (.125) 4 6.4 (.250) PT - S C 09 Cam Style T No hook A B C 19 (.75) 28.6 (1.13) 3 (.12) Order lock and cam separately Cam part number (no lock) For Lock selection see page 170 STANDARD ACTUAL SIZE SHORT MINATURE ACTUAL SIZE Dimensions inLONG millimeters (inch) unless otherwise stated Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/PT