PD-2.331 rev. A 12/97 1N6095 1N6096 SCHOTTKY RECTIFIER 25 Amp Description/Features Major Ratings and Characteristics Characteristics 1N609. Units IF(AV) Rectangular 25* A 30/40* V IFSM @ 60Hz 400* A VF @ 80 Apk, TJ= 70C 0.86* V TJ range - 65 to 125* C waveform VRRM The 1N609. Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 125 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 125 C TJ operation Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Hermetic packaging * JEDEC Registered Values CASE STYLE AND DIMENSIONS Conforms to JEDEC Outline DO-203AA (DO-4) Dimensions in millimeters and inches www.irf.com 1 1N6095, 1N6096 PD-2.331 rev. A 12/97 Voltage Ratings Part number VR 1N6095 1N6096 30* 40* Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 1N609. Units IF(AV) Max. Average Forward Current See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive Surge Current See Fig. 7 EAS Non-Repetitive Avalanche Energy IAR Repetitive Avalanche Current Conditions 25* A 50% duty cycle @ TC = 105 C, rectangular wave form 400* A 60Hz halfwave, single phase 40 mJ 6 A TJ = 25 C, IAS= 6 Amps, L = 2.20 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters 1N609. Units VFM Max. Forward Voltage Drop See Fig. 1 (1) IRM Max. Reverse Leakage Current (1) Conditions V 60 mA TJ = 25 C See Fig. 2 250* mA TJ = 125 C CT Typical Junction Capacitance 6000* pF VR = 1VDC, test signal range 100Khz to 1Mhz 25 C LS Typical Series Inductance 6.5 nH Measured from top of terminal to mounting plane 10,000 V/ s dv/dt Max. Voltage Rate of Change (Rated V R) @ 80A TJ = 70 C 0.86* VR = rated VR (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 1N609. Units TJ Max. Junction Temperature Range -65 to 125* Tstg Max. Storage Temperature Range Conditions C -65 to 125* C RthJC Max. Thermal Resistance Junction to Case 2.0* C/W RthCS Typical Thermal Resistance, Case to Heatsink 0.50 C/W Mounting surface, smooth and greased wt Approximate Weight T Mounting Torque Case Style 5.8 (0.2) Min. 14 (12) Max. 23 (20) DCoperation See Fig. 4 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) DO-203AA(DO-4) JEDEC * JEDEC Registered Values 2 www.irf.com 1N6095, 1N6096 PD-2.331 rev. A 12/97 1000 1000 ReverseCurrent - I (mA) R 100 100C 10 75C 1 50C .1 25C .01 .001 0 5 10 15 20 25 30 35 40 45 ReverseVoltage- VR (V) 10 Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage T =125C J 10000 T = 25C J JunctionCapacitance - C (pF) T Instantaneous ForwardCurrent - I (A) F 100 T =125C J 1 .1 .1 .2 .3 .4 .5 .6 .7 .8 .9 1 1.11.21.31.41.5 T =25C J 1000 100 0 10 ForwardVoltageDrop- V (V) FM 20 30 40 50 ReverseVoltage- VR(V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance- Z (C/W) thJC 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 D=0.08 P DM t 1 t2 Notes: 1. Dutyfactor D= t / t 1 2 .01 SinglePulse (Thermal Resistance) .001 .00001 .0001 .001 2. Peak T =P x Z +T J DM thJC C .01 .1 1 10 100 t , Rectangular PulseDuration(Seconds) 1 Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 1N6095, 1N6096 PD-2.331 rev. A 12/97 25 RthJC (DC) =2.0C/W 120 AveragePower Loss- (W atts) AllowableCase Temperature- (C) 130 110 DC 100 90 80 0 10 20 30 D=0.08 D=0.17 20 D=0.25 D=0.33 D=0.50 15 10 RMSLimit 5 0 0 40 DC 10 20 30 40 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Non-Repetitive SurgeCurrent - I (A) FSM 10000 1000 At Any RatedLoadCondition And W ithRatedV RRMApplied FollowingSurge 100 10 100 1000 10000 SquareWave PulseDuration- tp (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com