Han® 24 HPR enlarged
All data given is in line with the actual state of art and therefore not binding.
HARTING reserves the right to modify designs without giving the relevant reasons.
Conductor
wire: stranded bare copper 4x2xAWG 26/7
Insulation: PE, Ø 1.05 mm
colours: wh/bu, wh/or, wh/gn, wh/br
Pairs
Aluminate foil overlapped PIMF
Screening
tinned copper wire braid,
braid coverage about 70 %
Jacket
Polyvinylchloride (PVC), ame retardant, lead free
• Suitable for generic cabling Category 6A /
Class EA according ISO/IEC 11 801 respec-
tively EN 50 173-1 especially for exible
installation (patch cords)
• Qualied for transmission up to 10 Gigabit
Ethernet 10GBase-T acc. IEEE 802.3an
• Based on stranded copper wires AWG 26/7
delivers patch cord performance up to
500 MHz
• Applicable for industrial premises
• High EMC capability based on the PIMF
construction
• Flame retardant, lead free and RoHS
compliant
• UL certied AWM Style 20276
This high-speed data cable was designed for exible installation
in industrial premises and it’s especially suitable for termination of
HARTING RJ45 data plugs in IP 20 as well as in IP 67 / IP 65.
The four pair / eight wire PIMF-construction allows the transmissi-
on of IT digital and analogue signals like Ethernet 10/100 Mbit/s,
10 Gigabit/s, video and voice services as well as IP-based data ser-
vices.
It delivers all characteristics to complete a generic cabling system
according ISO/IEC 24 702 respectively EN 50 173-3. Maximum
patch cord length specied up to 20 m (part of transmission channel
class EA)
Transmission performance meets Cat. 6A specication up to 500 MHz
for 10 Gigabit Ethernet transmission according IEEE 802.3an.
The cable is fully screened (each pair in metal foil plus an overall
wire braid) and guaranties a very safety signal transmission and high
EMC performance.
PVC is used as jacket material. The cable is ame retardant, lead
free and RoHS compliant.
Industrial Cable
8-wire, Cat. 6A, PVC
Sheath material: Polyvinylchlo-
ride (PVC), ame retardant, lead
free
Colour: yellow, RAL 1021
Cable sheath diameter:
6.3 mm ... 6.9 mm
Transmission performancen:
Cat.
6
A
/ transmission class E
A
up
to 500 MHz according
ISO/IEC 11 801 and EN 50 173-1
Transmission rate:
10/100 Mbit/s / 1/10 Gbit/s
Cable weight: 47 kg/km
ApplicationAdvantages
Identication Part number Drawing
HARTING Ha-VIS Industrial Cable 8-wire Cat. 6A PVC
Ha-VIS Industrial Cable
8-wire, Cat. 6A, PVC
Order information:
20 m ring 09 45 600 0532
50 m ring 09 45 600 0542
100 m ring 09 45 600 0502
500 m drum 09 45 600 0522
Data Sheet 0712
Technical characteristics
HARTING Ha-VIS Industrial Cable 8-wire Cat. 6A PVC
Transmission performance Category 6A according to IEC 61 156-6
Mechanical features
minimum bending radius
Tensile strength
Repeated bending: 8 x cable diameter
Singular bending: 4 x cable diameter
max. 70 N
Electrical characteristics at 20 °C
Conductor resistance max. 290 Ohm/km
Insulation resistance min. 500 MOhm x km
Propagation delay 5.3 ns/m
Characterisic impedance at 100 MHz 100 Ohm +/- 5 Ohm
Test voltage 700 V
Operating voltage max. 100 V
Chemical characteristics
Flame retardant IEC 60 332-1-2
Free of hazardous substances RoHS 2002/95/EG
UV resistant
Thermic features
Permissible temperature range
xed operation - 20 °C ... + 80 °C
exible operation - 20 °C ... + 80 °C
Printing HARTING INDUSTRIAL CABLE CAT 6A S/FTP 4x2xAWG26/7
E333435 AWM STYLE 20276 80°C 30V 094560005000201
“meter marking” “Charge Number” “HARTING LOGO”
Weight 47 kg/km
2012-10-08
HARTING Electric GmbH & Co. KG
Wilhelm-Harting-Straße 1 | D-32339 Espelkamp | Postfach 14 73 | D-32328 Espelkamp
Tel.: +49 577247-97100 | Fax: +49 577247-495 | Electric@HARTING.com | www.HARTING.com
Technical characteristics
HARTING Ha-VIS Industrial Cable 8-wire Cat. 6A PVC
Frequency
MHz
Attenuation
dB/100m
NEXT
dB
PS NEXT
dB
EL FEXT
dB
PS EL FEXT
dB
Return Loss
dB
1 3.1 75.63 72.3 67.8 64.8 20
4 5.7 66.3 63.3 55.8 52.8 23
8 8.0 61.8 58.8 49.7 46.7 24.5
10 8.9 60.3 57.3 47.8 44.8 25
16 11.2 57.2 54.2 43.7 40.7 25
20 12.6 55.8 52.8 41.8 38.8 25
25 14.1 54.3 51.3 39.8 36.8 24.2
31.25 15.8 52.8 49.9 37.9 34.9 23.3
62.5 22.5 48.4 45.4 31.9 28.9 20.7
100 28.7 45.3 42.3 27.8 24.8 19
200 41.4 40.8 37.8 21.8 18.8 16.4
250 46.6 39.3 36.3 19.8 16.8 15.6
300 51.4 38.1 35.1 18.3 15.3 15.6
400 60.1 36.3 33.3 15.8 12.8 15.6
500 67.9 34.8 31.8 13.8 10.8 15.6
according to IEC 61 156-6
