0603CS-43NXJBW - Coilcraft, Inc.

Specifications subject to change without notice.

Please check our website for latest information.

Chip Inductors

–

0603CS Series (1608)

Document 195-1

Document 195-1 Revised 10/14/09

Ultra-small size, exceptional Q and high SRFs

make these inductors ideal for high frequency

applications where size is at a premium. They

also have excellent DCR and current carrying

characteristics.

Typical L vs Frequency

Typical Q vs Frequency

10 100

Frequency (MHz)

1000 10000

Q factor

100

120 nH

33 nH

3.9 nH

68 nH

12 nH

270 nH

10 100

Frequency (MHz)

Inductance (nH)

1000 10000

400

350

100

150

200

250

300

120 nH

68 nH

33 nH

3.9 nH

12 nH

270 nH

ABCD

max max max ref E F G H IJ

0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches

1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm

overall

Terminal wraparound:

approx 0.007/0,18 both ends

terminal

Recommended

Land Pattern

-40 -20 0 20 40 60 80 100 140120

Ambient temperature (°C)

120

110

100

Percent of rated rmsI

25°C

Irms Derating

Core material Ceramic

Terminations RoHS compliant silver-palladium-platinum-glass frit.

Other terminations available at additional cost.

Weight 3.2 – 3.7 mg

Ambient temperature –40°C to +125°C with Irms current, +125°C

to +140°C with derated current

Storage temperature Component: –40°C to +140°C.

Packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at

+260°C, parts cooled to room temperature between cycles

Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

One per billion hours / one billion hours, calculated per Telcordia SR-332

Packaging 2000 per 7″ reel Paper tape: 8 mm wide, 1.0 mm thick,

2 mm pocket spacing

PCB washing Only pure water or alcohol recommended

Specifications subject to change without notice.

Please check our website for latest information.

0603CS Series (1608)

Document 195-2 Revised 10/14/09

Document 195-2

SRF DCR

Inductance2Percent Q 900 MHz 1.7 GHz min5max6Irms7Color

Part number1(nH) tolerance3 min4L typ Q typ L typ Q typ (GHz) (Ohms) (mA) dot

0603CS-1N6X_L_ 1.6 @ 250 MHz 524 1.67 49 1.65 63 12.5 0.030 700 Red

0603CS-1N8X_L_ 1.8 @ 250 MHz 516 1.83 35 1.86 50 12.5 0.045 700 Black

0603CS-2N2X_L_ 2.2 @ 250 MHz 513 2.22 31 2.24 44 12.5 0.250 100 Yellow

0603CS-3N3X_L_ 3.3 @ 250 MHz 5,2 35 3.31 75 3.38 88 5.90 0.045 700 Blue

0603CS-3N6X_L_ 3.6 @ 250 MHz 5,2 22 3.72 53 3.71 65 5.90 0.063 700 Red

0603CS-3N9X_L_ 3.9 @ 250 MHz 5,2 22 3.95 49 3.96 67 6.90 0.080 700 Brown

0603CS-4N3X_L_ 4.3 @ 250 MHz 5,2 22 4.32 50 4.33 70 5.90 0.063 700 Orange

0603CS-4N7X_L_ 4.7 @ 250 MHz 5,2 20 4.72 47 4.75 57 5.80 0.116 700 Violet

0603CS-5N1X_L_ 5.1 @ 250 MHz 5,2 20 4.93 47 4.95 56 5.70 0.140 700 Green

0603CS-5N6X_L_ 5.6 @ 250 MHz 5,2 26 5.77 63 6.05 80 4.76 0.075 700 Black

0603CS-6N8X_L_ 6.8 @ 250 MHz 5,2 27 6.75 60 7.10 81 5.80 0.110 700 Red

0603CS-7N5X_L_ 7.5 @ 250 MHz 5,2 28 7.70 60 7.82 65 4.80 0.106 700 Brown

0603CS-8N2X_L_ 8.2 @ 250 MHz 5,2 30 8.25 82 8.37 87 4.20 0.115 700 Orange

0603CS-8N7X_L_ 8.7 @ 250 MHz 5,2 28 8.86 62 9.32 58 4.60 0.109 700 Yellow

0603CS-9N5X_L_ 9.5 @ 250 MHz 5,2 28 9.7 59 9.92 61 5.40 0.135 700 Blue

0603CS-10NX_L_ 10 @ 250 MHz 5,2 31 10.0 66 10.6 83 4.80 0.130 700 Orange

0603CS-11NX_L_ 11 @ 250 MHz 5,2 30 11.0 53 11.5 56 4.00 0.130 700 Gray

0603CS-12NX_L_ 12 @ 250 MHz 5,2 35 12.3 72 13.5 83 4.00 0.130 700 Yellow

0603CS-15NX_L_ 15 @ 250 MHz 5,2 35 15.4 64 16.8 89 4.00 0.170 700 Green

0603CS-16NX_L_ 16 @ 250 MHz 5,2 34 16.2 55 17.3 52 3.30 0.170 700 White

0603CS-18NX_L_ 18 @ 250 MHz 5,2 35 18.7 70 21.4 69 3.10 0.170 700 Blue

0603CS-22NX_L_ 22 @ 250 MHz 5,2 38 22.8 73 26.1 71 3.00 0.190 700 Violet

0603CS-23NX_L_ 23 @ 250 MHz 5,2 38 24.1 71 28.0 67 2.85 0.190 700 Orange

0603CS-24NX_L_ 24 @ 250 MHz 5,2 36 24.5 45 28.7 39 2.65 0.190 700 Black

0603CS-27NX_L_ 27 @ 250 MHz 5,2 40 29.2 74 34.6 65 2.80 0.220 600 Gray

0603CS-30NX_L_ 30 @ 250 MHz 5,2 37 31.4 47 39.9 28 2.25 0.220 600 Brown

0603CS-33NX_L_ 33 @ 250 MHz 5,2 40 36.0 67 49.5 42 2.30 0.220 600 White

0603CS-36NX_L_ 36 @ 250 MHz 5,2 37 39.4 47 52.7 24 2.08 0.250 600 Red

0603CS-39NX_L_ 39 @ 250 MHz 5,2 40 42.7 60 60.2 40 2.20 0.250 600 Black

0603CS-43NX_L_ 43 @ 250 MHz 5,2 38 47.0 44 64.9 21 2.00 0.280 600 Orange

0603CS-47NX_L_ 47 @ 200 MHz 5,2 38 52.2 62 77.2 35 2.00 0.280 600 Brown

0603CS-51NX_L_ 51 @ 200 MHz 5,2 35 55.5 69 82.2 34 1.90 0.270 600 Blue

0603CS-56NX_L_ 56 @ 200 MHz 5,2 38 62.5 56 97.0 26 1.90 0.310 600 Red

0603CS-68NX_L_ 68 @ 200 MHz 5,2 37 80.5 54 168 21 1.70 0.340 600 Orange

0603CS-72NX_L_ 72 @ 150 MHz 5,2 34 82.0 53 135 20 1.70 0.490 400 Yellow

0603CS-82NX_L_ 82 @ 150 MHz 5,2 34 96.2 54 177 21 1.70 0.540 400 Green

0603CS-R10X_L_ 100 @ 150 MHz 5,2 34 124 49 — — 1.40 0.580 400 Blue

0603CS-R11X_L_ 110 @ 150 MHz 5,2 32 138 43 — — 1.35 0.610 300 Violet

0603CS-R12X_L_ 120 @ 150 MHz 5,2 32 166 39 — — 1.30 0.650 300 Gray

0603CS-R15X_L_ 150 @ 150 MHz 5,2 28 250 25 — — 0.990 0.920 280 White

0603CS-R18X_L_ 180 @ 100 MHz 5,2 25 305 22 — — 0.990 1.25 240 Black

0603CS-R20X_L_ 200 @ 100 MHz 5,2 25 — — — — 0.900 1.98 200 Green

0603CS-R21X_L_ 210 @ 100 MHz 5,2 27 — — — — 0.895 2.06 200 Gray

0603CS-R22X_L_ 220 @ 100 MHz 5,2 25 — — — — 0.900 2.10 200 Brown

0603CS-R25X_L_ 250 @ 100 MHz 5,2 25 — — — — 0.822 3.55 120 Violet

0603CS-R27X_L_ 270 @ 100 MHz 5,2 26 — — — — 0.830 2.16 170 Red

0603CS-R33X_L_ 330 @ 100 MHz 5,2 25 — — — — 0.900 3.89 100 Blue

0603CS-R39X_L_ 390 @ 100 MHz 5,2 25 — — — — 0.780 4.35 100 Yellow

1. When ordering, specify tolerance, termination and packaging codes:

0603CS-R39XJLW

Tolerance: G =2% J = 5% (Table shows stock tolerances in bold.)

Termination: L = RoHS compliant silver-palladium-platinum-glass frit.

Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or

S = non-RoHS tin-lead (63/37).

Packaging: W=7″ machine-ready reel. EIA-481 punched paper tape

(2000 parts per full reel).

U= Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge), use

code letter W instead.

2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/

HP 4286 impedance analyzer with Coilcraft-provided correlation pieces.

3. Tolerances in bold are stocked for immediate shipment.

4. Q measured at the same frequency as inductance using an Agilent/

HP 4291A with an Agilent/HP 16193 test fixture.

5. SRF measured using an Agilent/HP 8720D network analyzer and a

Coilcraft SMD-D test fixture.

6. DCR measured on a Cambridge Technology micro-ohmmeter and a

Coilcraft CCF858 test fixture.

7. Current that causes a 15°C temperature rise from 25°C ambient.

8. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Designer’s Kits C324A and B contain 10 each of all 5% values

Designer’s Kits C324A-2 and B-2 contain 10 each of all 2% values