APL5308/9 Low IQ, Low Dropout 300mA Fixed Voltage Regulator Features General Description * Low Quiescent Current : 60A (No load) * Low Dropout Voltage : 400mV (@300mA) The APL5308/9 series are micropower, low dropout linear regulators, which operate from 2.7V to 6V input volt- * Fixed Output Voltage : 1.5V ~ 4.5V by Step 0.1V age and deliver up to 300mA. Typical dropout voltage is only 400mV at 300mA loading. Designed for use in Increment * battery-powered system, the low 60A quiescent current makes it an ideal choice. Design with an internal P- Stable with Aluminum, Tantalum, or Ceramic Capacitors channel MOSFET pass transistor, the APL5308/9 maintain a low supply current, independent of the load current and * No Protection Diodes Needed * Built-in Thermal Protection * Built-in Current-Limit Protection * Controlled Short Circuit Current : 50mA * Fast Transient Response specified output current and controlled short-circuit current. The APL5308/9 regulators come in a minia- * Short Setting Time ture SOT-23-3, SOT-23-5, and SOT-89 packages. * SOT-23-3, SOT-23-5, and SOT-89 Packages * Lead Free and Green Devices Available dropout voltage. Other features include thermal-shutdown protection current limit protection to ensure Pin Configuration (RoHS Compliant) Applications * 5V to 3.3~4.5V Linear Regulators * 3.3V to 1.5~2.5V Linear Regulators * CD-ROM, CD-R/W, and DVD Player * Networking System, LAN Card, ADSL/Cable * Modem, Cable Set-Top Box * PC Peripherals V IN GND 3 3 1 2 1 2 GND V OUT V OUT V IN SOT-23-3 (Top View) SOT-23-3 (Top View) APL5308 NC V OUT NC 5 1 APL5309 5 4 2 NC 1 3 4 2 3 GND V IN V OUT V IN GND NC SOT-23-5 (Top View) SOT-23-5 (Top View) APL5309 APL5308 TAB is V IN TAB is GND 1 2 3 GND V IN V OUT SOT-89 (Top View) APL5308 1 2 3 V OUT GND V IN SOT-89 (Top View) APL5309 ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 1 www.anpec.com.tw APL5308/9 Ordering and Marking Information APL5308/9 Package Code A : SOT-23-3 B : SOT-23-5 D : SOT-89 Operating Ambient Temperature Range I : -40 to 85 oC C : 0 to 70 oC Handling Code TR : Tape & Reel Voltage Code : 15 : 1.5V ~ 45 : 4.5V Assembly Material G : Halogen and Lead Free Device Assembly Material Handling Code Temperature Range Package Code Voltage Code APL5308/9 15 D : APL5308/9 XXXXX - Date Code XXXXX 15 ; 15 - 1.5V Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC defines "Green" to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). Marking Information SOT-23-3 and SOT-23-5 packages Product Name APL5308-15A/B APL5308-16A/B APL5308-17A/B APL5308-18A/B APL5308-19A/B APL5308-20A/B APL5308-21A/B APL5308-22A/B APL5308-23A/B APL5308-24A/B APL5308-25A/B APL5308-26A/B APL5308-27A/B APL5308-28A/B APL5308-29A/B APL5308-30A/B APL5308-31A/B APL5308-32A/B APL5308-33A/B APL5308-34A/B APL5308-35A/B APL5308-43A/B APL5308-45A/B Marking 389X 38AX 38BX 38CX 38DX 38EX 38FX 38GX 38HX 38IX 38JX 38KX 38LX 38MX 38NX 38OX 38PX 38QX 38RX 38SX 38TX 38UX 38VX Product Name APL5309-15A/B APL5309-16A/B APL5309-17A/B APL5309-18A/B APL5309-19A/B APL5309-20A/B APL5309-21A/B APL5309-22A/B APL5309-23A/B APL5309-24A/B APL5309-25A/B APL5309-26A/B APL5309-27A/B APL5309-28A/B APL5309-29A/B APL5309-30A/B APL5309-31A/B APL5309-32A/B APL5309-33A/B APL5309-34A/B APL5309-35A/B APL5309-43A/B APL5309-45A/B Marking 399X 39AX 39BX 39CX 39DX 39EX 39FX 39GX 39HX 39IX 39JX 39KX 39LX 39MX 39NX 39OX 39PX 39QX 39RX 39SX 39TX 39UX 39VX The last character "X" in the marking is for data code. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 2 www.anpec.com.tw APL5308/9 Absolute Maximum Ratings Symbol VIN, VOUT (Note 1, 2) Parameter Input Voltage or Out Voltage Rating Unit 6.5 V Thermal Resistance - Junction to Ambient RTH,JA SOT-23-3 SOT-23-5 SOT-89 260 260 180 SOT-23-3 SOT-23-5 SOT-89 130 130 60 C/W Thermal Resistance - Junction to Case RTH,JC PD Power Dissipation TJMAX Junction Temperature TSTG Storage Temperature Range TL Lead Temperature, 10 Seconds C/W Internally Limited W 150 C -65 to +150 C 260 C Note 1: Stresses beyond the absolute maximum rating may damage the device and operating in the absolute maximum rating conditions may affect device reliability. Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD (max) = (TJ - TA) / JA; TJ = 125oC. Exceeding the maximum allowable power dissipation will result in excessive die temperature. Electrical Characteristics Unless otherwise noted these specifications apply over full temperature, CIN = 1F, COUT = 4.7F, TA= -40 to 85C. Typical values refer to TA = 25C. APL5308/9 Symbol VIN Parameter Test Conditions Input Voltage Unit Min. Typ. Max. 2.7 - 6 V VOUT -2% VOUT VOUT +2% V VOUT Output Voltage VOUT+1.0V< VCC<6.0V, 0mA< IOUT < IMAX ILIMIT Circuit Current Limit VIN = VOUT+1V - 650 - mA ISHORT Short Current VOUT = 0V - 50 - mA IOUT Load Current VIN = VOUT+1V 300 - - mA REGLINE Line Regulation VOUT+1V< VCC<6.0V, IOUT = 1mA - 1 10 mV REGLOAD Load Regulation VIN = VOUT+1V, 0mA< IOUT < IMAX - 10 25 mV VIN= VOUT+1V, IOUT = 1mA-300mA in 1s - 150 250 mV 1.5VVOUT<2.0V - 1 1.2 2.0VVOUT<2.5V - 0.8 0.9 2.5VVOUT<3V - 0.6 0.7 3VVOUT 3.5V - 0.4 0.5 45 55 - No load - 60 100 IOUT = 300mA - 450 500 Load Transient VDROP PSRR IQ Dropout Voltage(Note3) Ripple Rejection IOUT =300mA V F1kHz, 1Vpp at VIN = VOUT+1.0V Quiescent Current Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 3 dB A www.anpec.com.tw APL5308/9 Electrical Characteristics (Cont.) Unless otherwise noted these specifications apply over full temperature, CIN = 1F, COUT = 4.7F, TA= -40 to 85C. Typical values refer to TA = 25C. Symbol OTS Parameter APL5308/9 Test Conditions Over Temperature Shutdown Unit Min. Typ. Max. - 150 - C - 30 - C TC Output Voltage Temperature Coefficient - 50 - ppm/C TJ Junction Temperature 0 - 125 C Output Capacitor - 2.2 - F 0.01 0.1 1 Ohm Over Temperature Shutdown Hysteresis COUT Hysteresis ESR Note 3 : Dropout voltage definition : VIN-VOUT when VOUT is 2% below the value of VOUT for VIN = VOUT+1V. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 4 www.anpec.com.tw APL5308/9 Typical Operating Characteristics Quiescent Current vs. Output Current Quiescent Current vs. Input Voltage APL5308/9-33 APL5308/9-33 450 450 IOUT=0mA 400 Quiescent Current (A) Quiescent Current (A) 400 350 300 250 200 150 100 50 VIN=5V 350 300 250 200 150 100 50 0 0 0 1 2 3 4 5 6 0 100 200 300 400 500 Input Voltage (V) Output Current (mA) Output Voltage vs. Input Voltage Output Voltage vs. Temperature APL5308/9-33 3.5 3.31 IOUT=0mA VOUT=3.3V 3.31 2.5 Output Voltage (V) Output Voltage (V) 3 VOUT=2.5V 2 VOUT=1.8V 1.5 1 0.5 3.30 3.30 3.29 3.29 3.28 0 3.28 0 1 2 3 4 5 -40 Input Voltage (V) Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 -20 0 20 40 60 80 100 120 140 Temperature (C ) 5 www.anpec.com.tw APL5308/9 Typical Operating Characteristics (Cont.) Output Voltage vs. Temperature Output Voltage vs. Temperature APL5308/9-2.5 APL5308/9-1.8 1.84 2.55 2.54 1.83 2.53 1.82 Output Voltage (V) Output Voltage (V) 2.52 2.51 2.50 2.49 2.48 2.47 1.81 1.80 1.79 1.78 2.46 1.77 2.45 -40 -20 0 20 40 60 -40 80 100 120 140 -20 0 Temperature (C) 20 40 60 80 100 120 140 Temperature (C) PSRR vs. Frequency Dropout Voltage vs. Output Current APL5308/9-33 700 +0 VIN =5V IOUT =50mA -20 500 -30 PSRR (dB) Dropout Voltage (mV) -10 VOUT=1.9V 600 400 VOUT=2.5V 300 200 -40 -50 - 60 VOUT=3.3V 100 VOUT=2.8V - 70 -80 0 0 50 100 150 200 250 20 300 Frequency (HZ) Output Current (mA) Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 50 100 200 500 1 k 2k 5k 10k 20k 50k 100k 200k 6 www.anpec.com.tw APL5308/9 Typical Operating Characteristics (Cont.) Load-Transient Response Line-Transient Response APL5308/9-33 Output Voltage (10mV/div) Output Voltage (100mV/div) APL5308/9-33 VOUT VIN=5V COUT=1F IOUT=1mA~300mA VIN=4.5V~5.5V COUT=1F IOUT=10mA VOUT Time (100s/div) Time (200s/div) Power Dissipation vs. Ambient Temperature Recommended Minimum Footprint 0.8 0.7 Power Dissipation (W) 0.6 0.5 SOT-89 0.4 0.3 SOT-25 0.2 0.1 0 0 25 50 75 100 125 Ambient Temperature (C) Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 7 www.anpec.com.tw APL5308/9 Pin Description PIN I/O NO. NAME 1 VIN 2 GND 3 VOUT I FUNCTION Supply voltage input. Ground pins of the circuitry, and all ground pins must be soldered To PCB with proper power dissipation. O Output pin of the regulator. Typical Application Circuit INPUT 2.7V to 6V VIN VOUT VOUT APL5308/9 CIN 1 F Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 GND 8 COUT 2.2 F www.anpec.com.tw APL5308/9 Package Information SOT-23-3 D e E E1 SEE VIEW A c b 0.25 A L GAUGE PLANE SEATING PLANE 0 A1 A2 e1 VIEW A S Y M B O L SOT-23-3 INCHES MILLIMETERS MIN. MIN. MAX. MAX. 0.057 A 1.45 A1 0.00 0.15 0.000 0.006 A2 0.90 1.30 0.035 0.051 b 0.30 0.50 0.012 0.020 c 0.08 0.22 0.003 0.009 D 2.70 3.10 0.106 0.122 E 2.60 3.00 0.102 0.118 E1 1.40 1.80 0.055 0.071 e 0.95 BSC e1 1.90 BSC 0.037 BSC 0.075 BSC L 0.30 0.60 0 0 8 0.012 0 0.024 8 Note : Dimension D and E1 do not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 9 www.anpec.com.tw APL5308/9 Package Information SOT-23-5 D e E E1 SEE VIEW A b c 0.25 A L 0 GAUGE PLANE SEATING PLANE A1 A2 e1 VIEW A S Y M B O L SOT-23-5 INCHES MILLIMETERS MIN. MIN. MAX. A MAX. 1.45 0.057 A1 0.00 0.15 0.000 0.006 A2 0.90 1.30 0.035 0.051 b 0.30 0.50 0.012 0.020 c 0.08 0.22 0.003 0.009 D 2.70 3.10 0.106 0.122 E 2.60 3.00 0.102 0.118 E1 1.40 1.80 0.055 0.071 e 0.95 BSC e1 1.90 BSC 0.037 BSC 0.075 BSC L 0.30 0.60 0 0 8 0.012 0 0.024 8 Note : 1. Follow JEDEC TO-178 AA. 2. Dimension D and E1 do not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 10 www.anpec.com.tw APL5308/9 Package Information SOT-89 A C L H E E1 D D1 e e1 B B1 SOT-89 S Y M B O L A MIN. MAX. MIN. MAX. 1.40 1.60 0.055 0.063 MILLIMETERS INCHES B 0.44 0.56 0.017 0.022 B1 0.36 0.48 0.014 0.019 C 0.35 0.44 0.014 0.017 D 4.40 4.60 0.173 0.181 D1 1.62 1.83 0.064 0.072 E 2.29 2.60 0.090 0.102 E1 2.13 2.29 0.084 0.090 e 1.50 BSC e1 3.00 BSC 0.059 BSC 0.118 BSC H 3.94 4.25 0.155 0.167 L 0.89 1.20 0.035 0.047 Note : Follow JEDEC TO-243 AA. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 11 www.anpec.com.tw APL5308/9 Carrier Tape & Reel Dimensions P0 P2 P1 A B0 W F E1 OD0 K0 A0 A OD1 B B T SECTION A-A SECTION B-B H A d T1 Application SOT-23-3 Application SOT-23-5 Application SOT-89 A H T1 C d D W E1 F 178.0 2.00 50 MIN. 8.4+2.00 -0.00 13.0+0.50 -0.20 1.5 MIN. 20.2 MIN. 8.00.30 1.750.10 3.50.05 P0 P1 P2 D0 D1 T A0 B0 K0 1.0 MIN. 0.6+0.00 -0.40 3.200.20 3.10 0.20 1.500.20 4.00.10 4.00.10 2.00.05 1.5+0.10 -0.00 A H T1 C d D W E1 F 178.0 2.00 50 MIN. 8.4+2.00 -0.00 13.0+0.50 -0.20 1.5 MIN. 20.2 MIN. 8.00.30 1.750.10 3.50.05 P0 P1 P2 D0 D1 T A0 B0 K0 1.0 MIN. 0.6+0.00 -0.40 3.200.20 3.10 0.20 1.500.20 4.00.10 4.00.10 2.00.05 1.5+0.10 -0.00 A H T1 C d D W E1 F 178.0 2.00 50 MIN. 12.4+2.00 -0.00 13.0+0.50 -0.20 1.5 MIN. 20.2 MIN. 12.00.30 1.750.10 5.500.05 P0 P1 P2 D0 D1 T A0 B0 K0 2.00.05 1.5+0.10 -0.00 1.5 MIN. 0.6+0.00 -0.40 4.800.20 4.50 0.20 1.800.20 4.00.10 8.00.10 Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 12 www.anpec.com.tw APL5308/9 Devices Per Unit Package Type Unit Quantity SOT 23-3 Tape & Reel 3000 SOT 23-5 Tape & Reel 3000 SOT-89 Tape & Reel 1000 Taping Direction Information SOT-23-3 USER DIRECTION OF FEED SOT-23-5 USER DIRECTION OF FEED SOT-89 USER DIRECTION OF FEED Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 13 www.anpec.com.tw APL5308/9 Reflow Condition (IR/Convection or VPR Reflow) tp TP Critical Zone TL to TP Ramp-up Temperature TL tL Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Time Reliability Test Program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245C, 5 sec 1000 Hrs Bias @125C 168 Hrs, 100%RH, 121C -65C~150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA Classification Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classification Temperature (Tp) Time within 5C of actual Peak Temperature (tp) Ramp-down Rate Sn-Pb Eutectic Assembly Pb-Free Assembly 3C/second max. 3C/second max. 100C 150C 60-120 seconds 150C 200C 60-180 seconds 183C 60-150 seconds 217C 60-150 seconds See table 1 See table 2 10-30 seconds 20-40 seconds 6C/second max. 6C/second max. 6 minutes max. Time 25C to Peak Temperature Notes: All temperatures refer to topside of the package. Measured on the body surface. Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 14 8 minutes max. www.anpec.com.tw APL5308/9 Classification Reflow Profiles (Cont.) Table 1. SnPb Eutectic Process - Package Peak Reflow Temperatures 3 3 Package Thickness Volume mm Volume mm <350 350 <2.5 mm 240 +0/-5C 225 +0/-5C 2.5 mm 225 +0/-5C 225 +0/-5C Table 2. Pb-free Process - Package Classification Reflow Temperatures 3 3 3 Package Thickness Volume mm Volume mm Volume mm <350 350-2000 >2000 <1.6 mm 260 +0C* 260 +0C* 260 +0C* 1.6 mm - 2.5 mm 260 +0C* 250 +0C* 245 +0C* 2.5 mm 250 +0C* 245 +0C* 245 +0C* *Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated classification temperature (this means Peak reflow temperature +0C. For example 260C+0C) at the rated MSL level. Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 2F, No. 11, Lane 218, Sec 2 Jhongsing Rd., Sindian City, Taipei County 23146, Taiwan, R. O. C. Tel : 886-2-2910-3838 Fax : 886-2-2917-3838 Copyright ANPEC Electronics Corp. Rev. A.10 - Dec., 2008 15 www.anpec.com.tw