SPECIAL PURPOSE Basic Switch D2X Crimp Connector Switch Reduced wiring time with AMP crimp-type connectors Snap-fit attachment for easy installation Actuator operates from either side, allowing mounting in either direction High contact force and wiping action for greater contact reliability Rated load 0.1 A at 30 VDC Ordering Information Actuator Center mounted rotary lever Terminal Crimp-type connector Contact OF 50 g Part Number Standard Model D2X CONTACT FORM Characteristics Electrical ratings Operating speed Operating frequency Mechanical Electrical Contact resistance Insulation resistance Dielectric strength Vibration Shock Ambient temperature Humidity Service life Malfunction durability Malfunction durability Operating Operating Mechanical Electrical Weight Note: Data shown are of initial value. 0.1 A, 30 VDC (resistive load) 0.1 mm to 100 mm/second (0.004 to 3.94 in/second) 60 operations per minute (OT: full stroke) 30 operations per minute (0.1 A at 30 VDC) 200 m 100 M min. at 250 VDC 250 VAC, 50/60 Hz for 1 minute between contacts of same polarity 250 VAC, 50/60 Hz for 1 minute between each terminal and ground 10 to 55 Hz, 1.5 mm double amplitude 300 m/s2 minimum (approx. 30 g minimum) -10 to 70C 45% to 85% RH max. with no icing 1 million operations minimum (OT: full stroke) 50,000 operations minimum (rated load) Approx. 1 g D2X D2X Dimensions Unit: mm (inch) D2X Operating characteristics OF RF min. OP TTP max. Mounting holes With 1.6 mm panel thickness With 1.2 mm panel thickness Note: 1. Unless otherwise specified, a tolerance of 0.2 mm applies to all dimensions. 2. The tolerance of the center of each hole is 0.07 mm. Precautions For proper operation, follow these guidelines: Set the dog or cam stroke so the actuator does not receive excessive force when the switch is actuated. When the actuator is released, the dog or cam must be off the actuator head. Set the dog or cam so that it will press the head of the lever in the traveling direction of the lever. Do not allow the lever to be pressed beyond the TTP. 2 D2X 50 g 2g 2 to 9 max. or 0.52 to 2.35 mm (0.020 to 0.93 in) 25 or 6.34 mm (0.250 in) D2X D2X OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465 Cat. No. GC SW5 4/98 Specifications subject to change without notice. Printed in the U.S.A. 3