Net Series AA20140 AA20140 Total Power 70 - 120 Watts Input Voltages 85 - 264VAC # of Outputs Quad SPECIAL FEATURES ELECTRICAL SPECIFICATIONS * * * * * * * * * Input Active power factor correction EN61000-3-2 compliance Remote sense on outputs one and two Industry-standard 4.25" x 7" footprint Adjustable main outputs Built-in Class B EMI filter Overvoltage protection Overload protection Thermal overload protection ENVIRONMENTAL Operating temperature: 0 to 50C ambient; derate each output at 2.5% per degree from 50 to 70C Electromagnetic susceptibility: Designed to meet EN61000-4, -2, -3, -4, -5, -6, Level 3 Humidity: Operating; non-condensing 20% to 90% Vibration: 5-32 Hz sinewave .02" double amplitude 32-2 kHz sinewave 1 G peak Storage temperature: -40 to 85C Temperature coefficient: .04% per C MTBF per MIL STD 217E: >200,000 hours at full load and 30C ambient conditions and full load UK: +44 (0)1384 842211 France: +33 (0)1 4305 8680 Input range ........................... 90-264 VAC Frequency ............................ 47-63 Hz Inrush current ....................... 40 A max., cold start @ 25C Efficiency .............................. 65% typical at full load EMI filter ............................... FCC Class B conducted and radiated, CISPR 22 Class B conducted and radiated, EN55022 Class B conducted and radiated, VDE 0878 PT3 Class B conducted and radiated. Power factor ......................... 0.99 typical Safety ground Leakage current ................... <2 mA @ 50/60 Hz, 254 VAC input Output Maximum power .................. 70 W convection; 120 W with 30 CFM forced air Adjustment range ................ 5% minimum on 3.3 V and 5 V outputs Hold-up time ......................... 15 ms @ 120 W load, 115 VAC input Overload protection .............. Short circuit protection on all outputs. Case overload protected @ 110145% above peak rating Overvoltage protection ......... 3.3 V output: 4.25 V .25 V 5 V output: 6.25 V .75 V, 20-35% above nominal output. Latching type recycle AC to reset. Remote sense ..................... 3.3V and 5V outputs: compensates for 0.5 V lead drop min. Will operate without remote sense connected. SAFETY TUV UL CUL CB CE EN60950 UL1950 CSA 22.2-234 Level 3 Certificate and report Mark (LVD) Germany: +49 (0)6621 50570 9837006 E186249 E186249 DE2-002056 Netherlands: +31 (0)24 372 3210 Astec Standard Power Europe Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands. DY5 1LX Telephone: +44 (0)1384 842211 Facsimile:+44 (0)1384 843355 Astec Standard Power Germany Robert-Heil-Str. 8 36251 Bad Hersfeld Germany Telephone: +49 (0)6621 50570 Facsimile: +49 (0)6621 505720 Astec France S.A.R.L. 424 La Closerie, Mont D'est 93194 Noisy le Grand France Telephone: +33 (0)1 4305 8680 Facsimile: +33 (0)1 4304 6033 Astec Netherlands Kerkenbos 10-125 Nijmegen The Netherlands Telephone: +31 (0)24 372 3210 Facsimile:+31 (0)24 372 3219 L O W ORDERING INFORMATION Model Number AA20140 1. 2. 3. 4. Output Voltage +3.3 V +5 V +12 V -12 V Minimum Load 0A 1A 0.2 A 0A Maximum Load with Convection Cooling 8A 10 A 1A 0.5 A Maximum Load with 30 CFM Forced Air 16 A 20 A 2A 0.5 A Peak Load1 18 A 22 A 3A 1A Regulation2 Ripple P/P (PARD)3 2% 3% 5% 10% P O W 50 mV 50 mV 120 mV 120 mV E R Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges. Minimum loads are required for correct operation, unit will self protect if not connected. DRAWINGS PIN ASSIGNMENTS 3.75" (95.25) 4.25" (107.95) Connector GND SK1 PIN 1 PIN 3 Neutral Live SK2 PIN 1-10 PIN 11 PIN 12 PIN 13 PIN 14-17 PIN 18-22 PIN 23 PIN 24 Common +5 Sense +3.3 V Sense +12 V 5V 3.3 V Return Sense -12 V 1 3 6.50" (165.10) MATING CONNECTORS (SK1) AC Input: Molex: 09-50-8031 (USA) Molex: 26-03-4050 (UK) PINS: 08-58-0189 (SK2) DC Output: Molex: Right angle 39-30-1240 or 39-29-1248 or Vertical 39-28-1243 7.00" (177.80) Astec Connector Kit #70-841-013 NOTES 1. 2. 3. 4. Specifications subject to change without notice. All dimensions in inches (mm), tolerance .02". Warranty: 1 year Weight: 1.38 lb. / .63 kg Height is 1.6" 8.50" (215.90) SK2 REV 10.5.99 www.astec.com AA20140-288 SK1