a~í~=pÜÉÉía~í~=pÜÉÉí
¤EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS’ prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SMT inductors
SIMID series, SIMID 0603-C
Series/Type: B82496C
Date: July 2016
207/16
Please read Cautions and warnings and
Important notes at the end of this document.
Size 0603 (EIA) and/or 1608 (IEC)
Rated inductance 1 ... 220 nH
Rated current 110 ... 1800 mA
Construction
■Copper-plated ceramic core
■Laser-cut winding, epoxy-coated
Features
■Temperature range up to +150 °C
■High resonance frequency
■Close inductance tolerance
■Free of polarization effect
■High mechanical stability
■Qualified to AEC-Q200
■Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020D
■RoHS-compatible
Applications
Resonant circuits, impedance matching for
■Multimedia
■Car access systems
■Wireless communication systems
■TPMS (Tire Pressure Monitoring System)
■GPS (Global Positioning System)
■Digital cameras
Terminals
■Base material Al2O3 ceramic with Cu layer
■Layer composition Ni, Sn (lead-free)
■Electro-plated
Marking
■No marking on component
■Minimum data on reel:
Manufacturer, ordering code, L value,
quantity, date of packing
Delivery mode and packing unit
■8-mm cardboard tape, wound on 180-mm reel
■Packing unit: 4000 pcs./reel
B82496CSMT inductors, SIMID series
SIMID 0603-C
307/16
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing and layout recommendation
Taping and packing
Cardboard tape Reel
ABC
0.8 r0.1 2.3 r0.3 0.9 r0.1
Dimensions in mm
Dimensions in mm
B82496CSMT inductors, SIMID series
SIMID 0603-C
407/16
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Rated inductance LRMeasured with impedance analyzer Agilent 4291A
and test fixture Agilent 16196A at frequency fL, 0.1 V,
+20 °C
Q factor Qmin,Qtyp Measured with impedance analyzer Agilent 4291A
and test fixture Agilent 16196A,
Qmin measured at frequency fQ, +20 °C
Rated temperature TR+125 qC
Rated current IRMaximum permissible DC with a temperature increase
of d 15 K at rated temperature
Self-resonance frequency fres,min Measured with network analyzer Agilent 8720D, +20 °C
DC resistance Rmax Measured at +20 °C
Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (5 r0.3) s
Wetting of soldering area t 95%
(based on IEC 60068-2-58)
Resistance to soldering heat +260 qC, 40 s (as referenced in JEDEC J-STD 020D)
Climatic category 55/150/56 (to IEC 60068-1)
Storage conditions Mounted: –55 °C … +150 °C
Packaged: –25 °C … +40 °C, d 75% RH
Weight Approx. 4 mg
B82496CSMT inductors, SIMID series
SIMID 0603-C
507/16
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available (see also chapter “Sample kits”. Ordering code: B82496X001
1) Replace the + by the code letter for the required inductance tolerance.
LR
nH
Tolerance Qmin Qtyp
(at
800 MHz)
fL;f
Q
MHz
IR
mA
Rmax
:
fres,min
GHz
Ordering code1)
(reel packing)
1.0 r0.3 nH A
r0.2 nH Z
7 60 100 1800 0.02 16 B82496C3109+000
1.2 8 60 100 1800 0.025 15 B82496C3129+000
1.5 8 50 100 1500 0.03 13 B82496C3159+000
1.8 12 50 100 1500 0.033 12 B82496C3189+000
2.2 14 50 100 1500 0.035 10 B82496C3229+000
2.7 14 40 100 1400 0.04 10 B82496C3279+000
3.3 14 40 100 1200 0.06 9 B82496C3339+000
3.9 r5% J
r0.2 nH Z
14 40 100 1100 0.065 8 B82496C3399+000
4.7 14 40 100 800 0.10 7 B82496C3479+000
5.6 14 40 100 700 0.15 6 B82496C3569+000
6.8 14 40 100 700 0.15 6 B82496C3689+000
8.2 14 40 100 650 0.18 6 B82496C3829+000
10 r5% J
r2% G
14 40 100 600 0.20 5 B82496C3100+000
12 14 40 100 450 0.35 5 B82496C3120+000
15 14 40 100 420 0.40 4.5 B82496C3150+000
18 14 40 100 400 0.45 4.0 B82496C3180+000
22 14 40 100 380 0.50 4.0 B82496C3220+000
27 14 35 100 360 0.55 3.0 B82496C3270+000
33 14 35 100 350 0.60 3.0 B82496C3330+000
39 14 35 100 300 0.80 2.5 B82496C3390+000
47 14 35 100 270 0.95 2.5 B82496C3470+000
56 14 35 100 250 1.2 2.5 B82496C3560+000
68 14 35 100 230 1.3 2.0 B82496C3680+000
82 14 35 100 220 1.5 2.0 B82496C3820+000
100 14 30 100 200 1.8 1.8 B82496C3101+000
120 5 30 25.2 160 3.0 1.8 B82496C3121+000
150 5 30 25.2 130 5.0 1.6 B82496C3151+000
180 4 25 25.2 120 6.0 1.4 B82496C3181+000
220 4 25 25.2 110 7.0 1.3 B82496C3221+000
^
^
^
^
^
^
B82496CSMT inductors, SIMID series
SIMID 0603-C
607/16
Please read Cautions and warnings and
Important notes at the end of this document.
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4291A/16196A, typical values at +20 °C
Q factor versus frequency f
measured with impedance analyzer
Agilent 4291A/16196A, typical values at +20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at +20 °C
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = +125 °C)
B82496CSMT inductors, SIMID series
SIMID 0603-C
707/16
Cautions and warnings
■Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
807/16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS / TDK:
B82496C3100J B82496C3101J B82496C3109A B82496C3120J B82496C3121J B82496C3129A B82496C3150J
B82496C3151J B82496C3159A B82496C3180J B82496C3181J B82496C3189A B82496C3220J B82496C3221J
B82496C3229A B82496C3270J B82496C3279A B82496C3330J B82496C3339A B82496C3390J B82496C3399J
B82496C3470J B82496C3479J B82496C3560J B82496C3569J B82496C3680J B82496C3689J B82496C3820J
B82496C3829J B82496C3100G000 B82496C3101G000 B82496C3109Z000 B82496C3120G000
B82496C3121G000 B82496C3129Z000 B82496C3150G000 B82496C3151G000 B82496C3159Z000
B82496C3180G000 B82496C3181G000 B82496C3189Z000 B82496C3220G000 B82496C3221G000
B82496C3229Z000 B82496C3270G000 B82496C3279Z000 B82496C3330G000 B82496C3339Z000
B82496C3390G000 B82496C3399Z000 B82496C3470G000 B82496C3479Z000 B82496C3560G000
B82496C3569Z000 B82496C3680G000 B82496C3689Z000 B82496C3820G000 B82496C3829Z000
B82496C3429J000 B82496C3680J8 B82496C3221J8 B82496C3560J8 B82496C3180J8 B82496C3181J000
B82496C3180J008 B82496C3221J008 B82496C3560J008 B82496C3680J008
