Document Number: 94119 For technical questions, contact: diodestech@vishay.com www.vishay.com
Revision: 03-Mar-10 1
Schottky Rectifier, 2.1 A
VS-10MQ100NPbF
Vishay High Power Products
FEATURES
• Small foot print, surface mountable
• Low forward voltage drop
• High frequency operation
• Guard ring for enhanced ruggedness and long term
reliability
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Compliant to RoHS directive 2002/95/EC
• Designed and qualified for industrial level
DESCRIPTION
The VS-10MQ100NPbF surface mount Schottky rectifier
has been designed for applications requiring low forward
drop and very small foot prints on PC boards. Typical
applications are in disk drives, switching power supplies,
converters, freewheeling diodes, battery charging, and
reverse battery protection.
PRODUCT SUMMARY
IF(AV) 2.1 A
VR100 V
SMA
Cathode Anode
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) DC 2.1 A
VRRM 100 V
IFSM tp = 5 μs sine 120 A
VF1.5 Apk, TJ = 125 °C 0.68 V
TJRange - 55 to 150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-10MQ100NPbF UNITS
Maximum DC reverse voltage VR100 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
See fig. 4 IF(AV)
50 % duty cycle at TL = 126 °C, rectangular waveform
On PC board 9 mm2 island
(0.013 mm thick copper pad area)
1.5 A
Maximum peak one cycle
non-repetitive surge current, TJ = 25 °C
See fig. 6
IFSM
5 μs sine or 3 μs rect. pulse Following any rated
load condition and with
rated VRRM applied
120
A
10 ms sine or 6 ms rect. pulse 30
Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 0.5 A, L = 8 mH 1.0 mJ
Repetitive avalanche current IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical 0.5 A
www.vishay.com For technical questions, contact: diodestech@vishay.com Document Number: 94119
2Revision: 03-Mar-10
VS-10MQ100NPbF
Vishay High Power Products Schottky Rectifier, 2.1 A
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
Note
(1) thermal runaway condition for a diode on its own heatsink
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop
See fig. 1 VFM (1)
1 A TJ = 25 °C 0.78
V
1.5 A 0.85
1 A TJ = 125 °C 0.63
1.5 A 0.68
Maximum reverse leakage current
See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR
0.1 mA
TJ = 125 °C 1
Threshold voltage VF(TO) TJ = TJ maximum 0.52 V
Forward slope resistance rt78.4 mΩ
Typical junction capacitance CTVR = 10 VDC, TJ = 25 °C, test signal = 1 MHz 38 pF
Typical series inductance LSMeasured lead to lead 5 mm from package body 2.0 nH
Maximum voltage rate of change dV/dt Rated VR10 000 V/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage
temperature range TJ (1), TStg - 55 to 150 °C
Maximum thermal resistance,
junction to ambient RthJA DC operation 80 °C/W
Approximate weight 0.07 g
0.002 oz.
Marking device Case style SMA (similar D-64) V1J
dPtot
dTJ
------------- 1
RthJA
--------------<
Document Number: 94119 For technical questions, contact: diodestech@vishay.com www.vishay.com
Revision: 03-Mar-10 3
VS-10MQ100NPbF
Schottky Rectifier, 2.1 A Vishay High Power Products
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Peak Reverse Current vs.
Reverse Voltage
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Average Forward Current vs.
Allowable Lead Temperature
Fig. 5 - Maximum Average Forward Dissipation vs.
Average Forward Current
Fig. 6 - Maximum Peak Surge Forward Current vs.
Pulse Duration
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
10
1
V
FM
- Forward Voltage Drop (V)
I
F
- Instantaneous Forward
Current (A)
0.1
0.4 0.6 0.8 1.0 1.61.2 1.4
TJ = 25 °C
TJ = 150 °C
TJ = 125 °C
0.01
0.001
VR - Reverse Voltage (V)
IR - Reverse Current (mA)
0
0.0001
100
0.1
20 40 60
1
80
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
TJ = 25 °C
0
100
V
R
- Reverse Voltage (V)
C
T
- Junction Capacitance (pF)
0
10
10040 8020 60
TJ = 25 °C
1
I
F(AV)
- Average Forward Current (A)
Allowable Case Temperature (°C)
110
150
0 0.4 0.8 1.2 2.4
90
100
120
130
1.6 2.0
140
DC
See note (1)
Square wave (D = 0.50)
80 % rated VR applied
D = 0.20
D = 0.33
D = 0.50
D = 0.75
D = 0.25
I
F(AV)
- Average Forward Current (A)
Average Power Loss (W)
0
0.2
0.4
0.6
0.8
0 0.4 0.8 1.2 2.0 2.4
1.6
1.6
DC
RMS limit
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
1.4
1.2
1.0
t
p
- Square Wave Pulse Duration (µs)
100
IFSM - Non-Repetitive Surge Current (A)
10 100 1000 10 000
10
At any rated load condition and
with rated VRRM applied
following surge
TJ = 25 °C
www.vishay.com For technical questions, contact: diodestech@vishay.com Document Number: 94119
4Revision: 03-Mar-10
VS-10MQ100NPbF
Vishay High Power Products Schottky Rectifier, 2.1 A
ORDERING INFORMATION TABLE
2- Current rating
3- M = SMA
4- Q = Schottky “Q” series
5- Voltage rating (100 = 100 V)
6- N = New SMA
7- None = Box (1000 pieces)
TR = Tape and reel (7500 pieces)
- PbF = Lead (Pb)-free
8
1- HPP product suffix
Device code
51324678
VS- 10 M Q 100 N TR PbF
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95018
Part marking information www.vishay.com/doc?95029
Packaging information Tape and reel www.vishay.com/doc?95034
Bulk www.vishay.com/doc?95397
SPICE model www.vishay.com/doc?95371
Document Number: 95018 For technical questions concerning discrete products, contact: diodes-tech@vishay.com www.vishay.com
Revision: 25-Jun-07 For technical questions concerning module products, contact: ind-modules@vishay.com 1
SMA
Outline Dimensions
Vishay High Power Products
DIMENSIONS in millimeters (inches)
2.50 (0.098)
2.90 (0.114)
4.00 (0.157)
4.60 (0.181)
1.40 (0.055)
1.60 (0.062)
0.152 (0.006)
0.305 (0.012)
2.00 (0.078)
2.44 (0.096)
0.76 (0.030)
1.52 (0.060)
0.103 (0.004)
0.203 (0.008)
4.80 (0.188)
5.28 (0.208)
2.10 MAX.
(0.085 MAX. )
5.53 (0.218)
1.27 MIN.
(0.050 MIN.)
1.47 MIN.
(0.058 MIN.)
Soldering pad
12
12
Polarity Part Number
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
