SPECIFICATION CONTROL DRAWING Product Revision Product Name D-155-0325 oA min Product Dimensions oB C L min min max B D-155-0350 B D-155-0450 A D-155-0475 A D-155-0550 A D-155-0575 A D-155-0625 A D-155-0650 A D-155-0675 A D-155-0975 B 3.00 (0.118) 4.3 (0.170) 10 (0.400) 4.00 (0.157) 5.5 (0.216) 10 (0.400) 5.00 (0.197) 6.5 (0.255) 10 (0.400) 6.00 (0.236) 7.5 (0.295) 10 (0.400) 9.00 (0.355) 10.5 (0.413) 10 (0.400) 58.2 (2.290) 81 (3.200) 81 (3.200) 106 (4.175) 81 (3.200) 106 (4.175) 55 (2.216) 81 (3.200) 106 (4.175) 108 (4.250) Cable Dimensions oF M min min H ref oE 25 (0.985) 50 (1.970) 50 (1.970) 75 (2.955) 50 (1.970) 75 (2.955) 25 (0.985) 50 (1.970) 75 (2.955) 75 (2.955) 1.5 (0.060) to 3.00 (0.120) 1.5 (0.060) 2.0 (0.080) to 3.80 (0.150) 2.0 (0.080) 2.5 (0.098) to 4.5 (0.177) 2.5 (0.098) 3.5 (0.137) to 5.5 (0.216) 3.5 (0.137) 4.8 (0.190) to 9.5 (0.335) 4.8 (0.190) 8 (0.315) 12.5 (0.495) 12.5 (0.495) 15 (0.590) 12.5 (0.495) 15 (0.590) 8 (0.315) 12.5 (0.495) 15 (0.590) 15 (0.590) N max 28 (1.100) 60 (2.365) 60 (2.365) 83 (3.270) 60 (2.365) 83 (3.270) 28 (1.100) 60 (2.365) 83 (3.270) 83 (3.270) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SHIELD: Solder impregnated, flux coated, tin plated copper braid. SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color:gray. APPLICATION 1. These parts are designed to provide an environment protected in-line splice between the shield of cables, rated for 135C minimum, meeting the dimensional criteria listed, having tin, silver or nickel plated copper shields. 2. Temperature range: -55C to +150C. Install using Raychem-approved convection or infrared heating tools. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSHIELD* SPLICE DOCUMENT NO.: DCR NUMBER: D981020 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 06/15/98 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision D-155-0XXX REPLACES: D15503XX, D15504XX, D15505XX, D15506XX, D15509XX SCALE: None SIZE: A SHEET: 1 of 1