04/13/2017Page1/3

Contact insert-HC-A04-I-PT-M-1585278

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

Contact insert,Size:D7,Number of positions:4+PE,Pin,Push-in connection,230 V,10 A,0.14 mm²...1.5 mm²

Key Commercial Data

Packing unit 1

Connection method Push-in connection

Degree of pollution 3

Overvoltage category III

Number of positions 4+PE

Insertion/withdrawal cycles ≥ 500

Size D7

Conductor cross section 0.14 mm² ... 1.5 mm² (with ferrule)

Connection cross section AWG 26 ... 16 (with ferrule)

Assembly instructions Connectors may be operated only when there is no load/voltage.

Ambient conditions

04/13/2017Page2/3

Contact insert-HC-A04-I-PT-M-1585278

acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Electrical characteristics

Rated voltage for power contacts 230/400 V

Rated voltage (III/3) 230 V (Conductor-PE)

400 V (Conductor-Conductor)

Rated surge voltage 4 kV

Rated current 10 A

Standards and Regulations

Flammability rating according to UL 94 V0

Connector pin assignment connection side: Left

pin; right socket

eCl@ss 4.0 272607xx

eCl@ss 4.1 27260701

04/13/2017Page3/3

Contact insert-HC-A04-I-PT-M-1585278

ETIM 4.0 EC000438

ETIM 5.0 EC000438

UNSPSC 6.01 30211923

UNSPSC 7.0901 39121522

UNSPSC 11 39121522

UNSPSC 12.01 39121522

UNSPSC 13.2 39121522

Profile gasket-HC-D07-SP-RBK-1419622

Phoenix Contact 2017 © - all rights reserved