UNIVERSAL COMPACT SENSORS MULTIFUNCTION OPTOELECTRONIC SENSORS * Complete range of optic functions, basic, advanced and laser class 1 * Models with coaxial optics for polarised retroreflex, contrast and luminescence sensors * Trimmer or EASYtouchTM setting with Remote, Keylock and Delay functions * Standard cable or M12 connection with standard NPN or PNP configuration standard 50x50x15 S60 SERIES The S60 series, standard 50x50x15 mm compact housing, offers all the most advanced optic functions, as well as the universal, available with safety class 1 laser emission. The series presents a complete range of models, including retroreflex with coaxial optics and polarisation filters for the detection of shiny and/or transparent objects, background and foreground suppression, contrast sensors with white light emission for the detection of coloured marks, the sensor with UV emission for the detection of luminescence references and the distance sensor with analogue output. The basic models for presence detection present trimmer sensitivity adjustment, while the models with the advanced optics are microprocessor controlled and have the patent-covered EASYtouchTM setting, which gives rapid and precise setting of the switching threshold, with the possibility of remote control, keyboard block and selection of the output delay function. The S60 series offers versions with cable or M12 connection that can be rotated for either straight or right-angle positions. All versions have NPN or PNP output and standard configuration conforming to the EN 60947-5-2 standard. G/F THROUGH BEAM WITH INFRARED EMISSION The detection system with two separate emitter and receiver units allows the user to reach larger operating distances. The trimmer, present on the receiver, allows to adjust sensitivity and to detect objects that obscure, even partially, the light emission. The IR emission is modulated to avoid interference with other light sources and can be turned off to test the functioning even without the object to detect. DIMENSIONS A C C D EMITTER RECEIVER INDICATORS AND SETTINGS A B Output status and stability LEDs (receiver); power on LED (emitter) B Adjustment trimmer (receiver) C M12 connector output D Cable output A A Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 EMITTER BROWN Vdc WHITE BLACK TEST + + 10 ... 30 Vdc (WHITE) (BROWN) 0V (BLUE) BLUE TEST + (BLACK) RECEIVER BROWN Vdc WHITE NC OUTPUT (WHITE) + 10 ... 30 Vdc (BROWN) NC OUTPUT 0V - BLACK NO OUTPUT BLUE 2 (BLUE) NO OUTPUT (BLACK) 20 m TECHNICAL DATA Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: Indicators: 0 ... 20 m 10 ... 30 Vdc 1 2 Vpp 35 mA infrared LED 880 nm2 aprox. 200 mm at 4 m sensitivity trimmer 3 S60-PA-5-G00-XG S60-PA-5-F01-PP S60-PA-5-F01-NN S60-PA-2-G00-XG S60-PA-2-F01-PP S60-PA-2-F01-NN SELECTION TABLE receiver - 2 m cable S60-PA-2-F01-NN S60-PA-2-F01-PP 956201490 956201330 emitter - 2 m cable S60-PA-2-G00-XG 956201340 receiver - M12 connector S60-PA-5-F01-NN S60-PA-5-F01-PP 956201210 956201060 emitter - M12 connector S60-PA-5-G00-XG 956201070 NPN PNP NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED green STABILITY LED green POWER ON LED Output type: PNP, NO and NC NPN, NO and NC 100 mA 2V 1 ms 500 Hz dark on NO / light on NC Test + and Test - 4 Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Auxiliary functions: Connection: TECHNICAL NOTES 2 m O 4 mm cable 5 M12 4-pole connector 6 class 2 IP67 A, B 7 ABS window in PMMA8 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: 1 Limit Average life of 100.000 h with TA = +25 C 3 270 trimmer 4 Emitter off with Test+ on Vdc and Test- on 0 V 5 PVC, 4 x 0.14 mm2 6 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 Operating temperature: Storage temperature: Reference standard: values 2 7 8 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection on receiver outputs Internal lenses in Polycarbonate DETECTION DIAGRAMS 18 20 0 5 10 15 20 (m) Recommended operating distance Maximum operating distance Excess gain 3 Detection area L-G/F THROUGH BEAM WITH RED LASER EMISSION The high operating distance, typical of the emitter and receiver system, is notably increased thanks to the use of visible red laser emission. The laser beam can be easily aligned and offers excellent detection resolution of even small objects. The class 1 l a s e r e m i s s i o n , a c c o r d i n g t o EN 60825-1, guarantees maximum safety for the operators in all applications. DIMENSIONS A C C D EMITTER RECEIVER INDICATORS AND SETTINGS Output status and stability LEDs (receiver); power on LED (emitter) A B A B Adjustment trimmer (receiver) C M12 connector output D Cable output A Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. Decrease sensitivity to increase resolution. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 EMITTER BROWN Vdc TEST + WHITE (WHITE) BLACK NOT USED BLUE 0V (BLUE) + 10 ... 30 Vdc (BROWN) NOT USED (BLACK) RECEIVER BROWN Vdc NC OUTPUT WHITE NC OUTPUT (WHITE) NO OUTPUT 0V - BLACK (BLUE) BLUE 4 + 10 ... 30 Vdc (BROWN) NO OUTPUT (BLACK) 60 m Operating distance: Power supply: Ripple: Consumption: Light emission: 0 ... 60 m 10 ... 30 Vdc 1 2 Vpp 35 mA red Laser 650 nm 2 class 1 EN 60825-1 class II CDRH21 CFR 1040.10 aprox. 6 mm a 0.5 m aprox.10 mm over 2 m sensitivity trimmer receiver - 2 m cable S60-PL-2-F01-NN S60-PL-2-F01-PP 956201570 956201420 emitter - 2 m cable S60-PL-2-G00-XG 956201430 receiver - M12 connector S60-PL-5-F01-NN S60-PL-5-F01-PP 956201270 956201140 emitter - M12 connector S60-PL-5-G00-XG 956201150 NPN PNP NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue Resolution: Setting: Indicators: S50-PL-5-G00-XG S50-PL-5-F01-PP S50-PL-5-F01-NN S60-PL-2-G00-XG S60-PL-2-F01-PP SELECTION TABLE S60-PL-2-F01-NN TECHNICAL DATA 3 yellow OUTPUT LED green POWER ON LED Output type: PNP, NA and NC NPN, NA and NC 100 mA 2V 333 s 1.5 kHz dark on NO / light on NC Test + 4 Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Auxiliary functions: Connection: TECHNICAL NOTES 2 m O 4 mm cable M12 4-pole connector 6 class 2 IP67 A, B 7 ABS window in PMMA8 5 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: 1 Limit values Average life of 50.000 h with TA = +25 C 3 270 trimmer 4 Emitter off with Test+ connected to +Vdc Emitter on with Test+ not connected or connected to 0V 5 PVC, 4 x 0.14 mm2 6 Connector can be blocked on two positions 7 A - reverse polarity protection B - overload and short-circuit protection on receiver outputs 8 Internal lenses in glass and Polycarbonate 2 90 g max. 40 g max. -10 ... +50C -25 ... +70C EN 60947-5-2, EN 60825-1, CDRH21 CFR 1040.10 Operating temperature: Storage temperature: Reference standard: DETECTION DIAGRAMS 60 0 15 30 45 60 (m) Operating distance Detection area 5 Resolution B POLARISED RETROREFLEX WITH RED EMISSION With retroreflex sensors the object is detected when it interrupts the light beam generated between the sensor and its associated prismatic reflector. High-polarisation optic filters also allow reliable detection of very reflective objects, such as mirrored surfaces that, differently from the prismatic reflector, reflect the light beam without rotating the polarisation plane. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status stability LEDs B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc NC OUTPUT (WHITE) WHITE NC OUTPUT BLACK NO OUTPUT BLUE 6 0V (BLUE) + 10 ... 30 Vdc (BROWN) NO OUTPUT (BLACK) and 83 m TECHNICAL DATA Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: Indicators: 0.1 ... 8 m (on R5) 10 ... 30 Vdc 1 2 Vpp 40 mA red LED 660 nm 2 aprox. 90 mm at 3 m sensitivity trimmer 3 S60-PA-5-B01-PP S60-PA-5-B01-NN S60-PA-2-B01-PP S60-PA-2-B01-NN SELECTION TABLE axial optics - 2 m cable S60-PA-2-B01-NN S60-PA-2-B01-PP 956201460 956201300 NPN PNP axial optics - M12 connector S60-PA-5-B01-NN 956201180 S60-PA-5-B01-PP 956201040 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC 100 mA 2V 500 s 1 kHz dark on NO / light on NC Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: 2 m O 4 mm cable 4 M12 4-pole connector 5 class 2 IP67 A, B 6 ABS window in PMMA 7 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: TECHNICAL NOTES 1 Limit Average life of 100.000 h with TA = +25 C 3 270 trimmer 4 PVC, 4 x 0.14 mm2 5 Connector can be blocked on two positions 6 A - reverse polarity protection B - overload and short-circuit protection on outputs 7 Internal lenses in Polycarbonate 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 Operating temperature: Storage temperature: Reference standard: values 2 DETECTION DIAGRAMS R5 7 R2 6 6,5 0 2 4 6 8 8 R5 10 (m) Recommended operating distance Maximum operating distance R2 R5 R2 High efficiency reflectors can be used to obtain larger operating distances. Refer to Reflectors (A.01) of the General Catalogue Excess gain 7 Detection area L-B RETROREFLEX WITH RED LASER EMISSION The visible red laser emission increases the operating distance and resolution of the polarised retroreflex sensor. Specific R7 or R8 reflectors with 0.8 mm microprisms are available for highresolution detection of small objects. The class 1 laser emission, according to EN 60825-1, guarantees maximum safety for the operators in all applications. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status power on LEDs B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. Decrease sensitivity to increase resolution. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc NC OUTPUT (WHITE) WHITE NC OUTPUT BLACK NO OUTPUT BLUE 8 0V (BLUE) + 10 ... 30 Vdc (BROWN) NO OUTPUT (BLACK) and 20 m SELECTION TABLE Operating distance: Power supply: Ripple: Consumption: Light emission: 0.1 ... 20 m 10 ... 30 Vdc 1 2 Vpp 35 mA red Laser 650 nm 2 class 1 EN 60825-1 class II CDRH21 CFR 1040.10 approx. 10 mm sensitivity trimmer 3 Resolution: Setting: Indicators: S60-PL-5-B01-PP S60-PL-5-B01-NN S60-PL-2-B01-PP S60-PL-2-B01-NN TECHNICAL DATA axial optics - 2 m cable S60-PL-2-B01-NN S60-PL-2-B01-PP 956201560 956201410 NPN PNP axial optics - M12 connector S60-PL-5-B01-NN 956201260 S60-PL-5-B01-PP 956201120 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED green POWER ON LED Output type: PNP, NO and NC NPN, NO and NC 100 mA 2V 250 s 2 kHz dark on NO / light on NC Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: 2 m O 4 mm cable 4 M12 4-pole connector class 2 IP67 A, B 6 ABS window in PMMA 7 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: 5 TECHNICAL NOTES 1 Limit Operating temperature: Storage temperature: Standard reference: Average life of 50.000 h with TA = +25 C 3 270 trimmer PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection on outputs 4 90 g max. 40 g max. -10 ... +50C -25 ... +70C EN 60947-5-2, EN 60825-1, CDRH21 CFR 1040.10 values 2 5 6 7 Internal lenses in glass and Polycarbonate DETECTION DIAGRAMS 20 R2 R7 15 R2 0 5 10 15 20 (m) Operating distance R7 High efficienct reflectors can be used to obtain larger operating distances. Refer to Reflectors (A.01) of the General Catalogue Detection area 9 Resolution on R7 reflector B COAXIAL POLARISED RETROREFLEX WITH RED EMISSION The polarised retroreflex sensor with a coaxial optics offers the best resolution of the detection point as the optic emitting axis coincides with the optic receiving axis. The coaxial system also allows to reduce drastically the sensor's blind zone and consents the detection of objects very close to the sensor's frontal lens. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status stability LEDs B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 BROWN S60-PA-5 Vdc WHITE NC OUTPUT (WHITE) + 10 ... 30 Vdc (BROWN) NC OUTPUT 0V - BLACK NO OUTPUT BLUE 10 (BLUE) NO OUTPUT (BLACK) and 4m TECHNICAL DATA Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: Indicators: 0 ... 4 m 10 ... 30 Vdc 1 2 Vpp 40 mA red LED 660 nm 2 aprox. 50 mm at 1.5 m sensitivity trimmer 3 S60-PA-5-B51-PP S60-PA-5-B51-NN S60-PA-2-B51-PP S60-PA-2-B51-NN SELECTION TABLE coaxial optics - 2 m cable S60-PA-2-B51-NN 956201610 S60-PA-2-B51-PP 956201600 NPN PNP coaxial optics - M12 connector S60-PA-5-B51-NN 956201630 S60-PA-5-B51-PP 956201620 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC 100 mA 2V 500 s 1 kHz dark on NO / light on NC Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: Operating temperature: Storage temperature: Reference standard: 2 m O 4 mm cable 4 M12 4-pole connector 5 class 2 IP67 A, B 6 ABS window in glass (tilted anti-reflection) 7 TECHNICAL NOTES 1 Limite values Average life of 100.000 h with TA = +25 C 3 270 trimmer 2 4 PVC, 4 x 0.14 mm2 Connector can be blocked on two positions 6 A - reverse polarity protection B - overload and short-circuit protection on outputs 7 Internal lenses in glass 5 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 DETECTION DIAGRAMS R5 4 4,2 3 3,2 R2 0 1 2 3 4 R2 5 (m) Recommended operating distance Maximum operating distance High efficienct reflectors can be used to obtain larger operating distances. Refer to Reflectors (A.01) of the General Catalogue R5 R5 R2 Excess gain 11 Detection area T COAXIAL POLARISED RETROREFLEX FOR TRANSPARENTS The high sensitivity and reduced hysterisis of this retroreflex sensor allow to detect even the slightest at t e n u a t i o n of the received light emission, caused by the presence of transparent objects, such as glass or PET bottles or plastic film sheets for packaging. The presence of polarisation filters avoids false switching on shiny surfaces and the coaxial optics improves the detection precision on the entire operating range. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status LED B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE NC OUTPUT BLACK NO OUTPUT BLUE 12 NC OUTPUT (WHITE) 0V (BLUE) + 10 ... 30 Vdc (BROWN) NO OUTPUT (BLACK) 2m Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: Indicators: Output type: 0 ... 2 m 10 ... 30 Vdc 1 2 Vpp 40 mA red LED 660 nm 2 aprox. 50 mm at 1.5 m sensitivity trimmer 3 yellow OUTPUT LED S60-PA-5-T51-PP S60-PA-5-T51-NN S60-PA-2-T51-PP SELECTION TABLE S60-PA-2-T51-NN TECHNICAL DATA coaxial optics - 2 m cable S60-PA-2-T51-NN 956201530 S60-PA-2-T51-PP 956201380 NPN PNP coaxial optics - M12 connector S60-PA-5-T51-NN 956201250 S60-PA-5-T51-PP 956201100 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue PNP, NO and NC NPN, NO and NC 100 mA 2V 500 s 1 kHz dark on NO / light on NC Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: 2 m O 4 mm cable 4 M12 4-pole connector 5 class 2 IP67 A, B 6 ABS window in glass (tilted anti-reflection) Electrical protection: Mechanical protection: Protection devices: Housing material: Lens materiale: Weight: TECHNICAL NOTES 1 Limit 7 Average life of 100.000 h with TA = +25 C 3 270 trimmer 4 PVC, 4 x 0.14 mm2 5 Connector can be blocked on two positions 6 A - reverse polarity protection B - overload and short-circuit protection on outputs 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 Operating temperature: Storage temperature: Reference standard: values 2 7 Internal lenses in glass DETECTION DIAGRAMS R5 1,7 1,5 1,7 R2 0 2 0,5 1 1,4 1,5 R5 Recommended operating distance Maximum operating distance R5 R2 2 (m) R2 Excess gain 13 Detection area C DIFFUSE PROXIMITY This diffuse proximity sensor represents a reliable, simple and cost-effective solution for the direct detection of any object within the operating distance, that can be set using the sensitivity adjustment trimmer.. The visible red emission facilitates the alignment of the sensor or of the object to detect and in particular in short operating distances. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status LED B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE NC OUTPUT (WHITE) + 10 ... 30 Vdc (BROWN) NC OUTPUT 0V - BLACK NO OUTPUT BLUE 14 (BLUE) NO OUTPUT (BLACK) 100 cm Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: Indicators: 0 ... 100 cm 10 ... 30 Vdc 1 2 Vpp 40 mA red LED 660 nm 2 approx. 50 mm at 90 cm sensitivity trimmer 3 S60-PA-5-C01-PP S60-PA-5-C01-NN S60-PA-2-C01-PP SELECTION TABLE S60-PA-2-C01-NN TECHNICAL DATA axial optics - 2 m cable S60-PA-2-C01-NN S60-PA-2-C01-PP 956201470 956201310 NPN PNP axial optics - M12 connector S60-PA-5-C01-NN 956201190 S60-PA-5-C01-PP 956201050 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED green STABILITY LED Output type: Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: Operating temperature: Storage temperature: Reference standard: PNP, NO and NC NPN, NO and NC 100 mA 2V 500 s 1 kHz light on NO / dark on NC 2 m O 4 mm cable 4 M12 4-pole connector class 2 IP67 A, B 6 ABS window in PMMA 7 TECHNICAL NOTES 5 1 Limite values Average life of 100.000 h with TA = +25 C 3 270 trimmer 2 4 PVC, 4 x 0.14 mm2 Connector can be blocked on two positions 6 A - reverse polarity protection B - overload and short-circuit protection on outputs 5 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 7 Internal lenses in Polycarbonate DETECTION DIAGRAMS White 70 80 Grey 0 100 110 30 60 1,4 90 White 90% Grey 18% Grey 18% 120 (cm) Recommended operating distance Maximum operating distance White 90% Excess gain 15 Detection area C LONG DIFFUSE PROXIMITY This version of diffuse proximity sensor offers the maximum operating distance for the direct detection of objects, without the use of separate reflectors or receivers. The detection distance can be set using the sensitivity adjustment trimmer. The green stability LED indicates that the received signal is higher than the minimum signal for stable output switching. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status stability LEDs B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE NC OUTPUT (WHITE) + 10 ... 30 Vdc (BROWN) NC OUTPUT 0V - BLACK NO OUTPUT BLUE 16 (BLUE) NO OUTPUT (BLACK) and 200 cm Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: Indicators: 5 ... 200 cm 10 ... 30 Vdc 1 2 Vpp 40 mA infrared LED 880 nm 2 approx. 250 mm at 1 m sensitivity trimmer 3 S60-PA-5-C11-PP S60-PA-5-C11-NN S60-PA-2-C11-PP SELECTION TABLE S60-PA-2-C11-NN TECHNICAL DATA axial optics - 2 m cable S60-PA-2-C11-NN S60-PA-2-C11-PP 956201480 956201320 NPN PNP axial optics -M12 connector S60-PA-5-C11-NN 956201200 S60-PA-5-C11-PP 956201110 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC 100 mA 2V 500 s 1 kHz light on NO / dark on NC Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: 2 m O 4 mm cable 4 M12 4-pole connector class 2 IP67 A, B 6 ABS window in PMMA 7 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: TECHNICAL NOTES 5 1 Limite Average life of 100.000 h with TA = +25 C 3 270 trimmer 4 PVC, 4 x 0.14 mm2 5 Connector can be blocked on two positions 6 A - reverse polarity protection B - overload and short-circuit protection on outputs 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 Operating temperature: Storage temperature: Reference standard: values 2 7 Internal lenses in Polycarbonate DETECTION DIAGRAMS White 200 220 Grey 18% 120 140 Grey Grey 18% 0 50 100 1,4 150 200 250 (cm) Recommended operating distance Maximum operating distance White 90% White 90% Excess gain 17 Detection area L-C PROXIMITY WITH RED LASER EMSSION The visible red laser emission allows the accurate detection of very small objects. The sensors operate as a proximity device up to 60 cm and can be used as a contrast sensor for high contrast mark detection. The class 1 laser emission, according to E N 60825-1, guarantees maximum safety for the operators in all applications. DIMENSIONS A C C D INDICATORS AND SETTINGS B A A Output status power on LEDs B Adjustment trimmer C M12 connector output D Cable output Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE NC OUTPUT BLACK NO OUTPUT BLUE 18 NC OUTPUT (WHITE) 0V (BLUE) + 10 ... 30 Vdc (BROWN) NO OUTPUT (BLACK) and 60 cm Operating distance: Power supply: Ripple: Consumption: Light emission: 0 ... 60 cm 10 ... 30 Vdc 1 2 Vpp 35 mA red Laser 650 nm 2 class 1 EN 60825-1 class II CDRH21 CFR 1040.10 S60-PL-5-C01-PP S60-PL-5-C01-NN S60-PL-2-C01-PP SELECTION TABLE S60-PL-2-C01-NN TECHNICAL DATA axial optics - 2 m cable S60-PL-2-C01-NN S60-PL-2-C01-PP 956201640 956201650 NPN PNP axial optics - M12 connector S60-PL-5-C01-NN 956201660 S60-PL-5-C01-PP 956201670 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue Resolution: approx. 0.2 mm at 15 cm approx. 1 mm at 35 cm approx. 2 mm at 50 cm sensitivity trimmer 3 Setting: Indicators: yellow OUTPUT LED green POWER ON LED Output type: Output current: Saturation voltage: Response time: Switching frequency: Operating mode: Connection: Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: Operating temperature: Storage temperature: Reference standard: PNP, NO and NC NPN, NO and NC 100 mA 2V 250 s 2 kHz light on NO / dark on NC 2 m O 4 mm cable 4 M12 4-pole connector class 2 IP67 A, B 6 ABS window in PMMA 7 5 TECHNICAL NOTES 1 Limit values 2 Average life of 50.000 h with TA = +25 C 3 270 trimmer 4 PVC, 4 x 0.14 mm2 5 Connector can be blocked on two positions 6 A - reverse polarity protection B - overload and short-circuit protection on outputs 7 Internal lenses in glass and Polycarbonate 90 g max. 40 g max. -10 ... +50C -25 ... +70C EN 60947-5-2, EN 60825-1, CDRH21 CFR 1040.10 DETECTION DIAGRAMS 60 0 20 40 60 (cm) Grey 18% White 90% Operating distance Detection area 19 Resolution M BACKGROUND SUPPRESSION WITH RED EMISSION Background suppression proximity allows to precisely adjust the distance over which the object is not detected, with the minimum difference between different coloured objects. The EASYtouchTM setting procedure fixes automatically the best detection conditions with medium or high precision, simply pressing once the teach-in push-button, in presence of the background to suppress. DIMENSIONS A C C D INDICATORS AND SETTINGS A B A Output status and READY/ERROR LEDs B Teach-in push-button C M12 connector output D Cable output Teach-in button for setting. EASYtouchTM provides two setting modes: standard or fine. Please refer to instructions manual for operating details. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE REMOTE REMOTE BLACK NO OUTPUT BLUE 20 REMOTE + 10 ... 30 Vdc (WHITE) (BROWN) 0V (BLUE) NO OUTPUT (BLACK) 20 cm SELECTION TABLE Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: 7 ... 20 cm 10 ... 30 Vdc 1 2 Vpp 30 mA red LED 670 nm 2 approx. 16 mm at 20 cm S60-PA-5-M08-PH S60-PA-5-M08-NH S60-PA-2-M08-PH S60-PA-2-M08-NH TECHNICAL DATA axial optics - 2 m cable S60-PA-2-M08-NH S60-PA-2-M08-PH 956201500 956201350 NPN PNP axial optics - M12 connector S60-PA-5-M08-NH 956201220 S60-PA-5-M08-PH 956201080 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue teach-in push-button remote on cable 3 EASYtouchTM yellow OUTPUT LED green / red READY / ERROR LED Setting procedure: Indicators: Output type: PNP, NO NPN, NO 100 mA 2V 500 s 1 kHz Output current: Saturation voltage: Response time: Max. switching frequency: Operating mode: light with EASYtouchTM dark / light configurable 20 ms minimum output ON remote keylock 4 Timing function: Auxiliary functions: Connection: 2 m O 4 mm cable5 M12 4-pole connection 6 class 2 IP67 A, B 7 ABS window in PMMA8 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: TECHNICAL NOTES 1 2 3 4 5 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 Operating temperature: Storage temperature: Reference standard: 6 7 8 Limit values Average life of 100.000 h with TA = +25 C Connect to 0 V when remote wire not used Active with remote at +Vdc at power on PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection Internal lenses in Polycarbonate II3D DETECTION DIAGRAMS 0 5 10 15 % difference object distance 20 20 (cm) Operating distance White 90% / Grey 18% 10 White 90% / Black 6% 8 6 4 2 mm 0 70 120 170 220 Setting distance on white 90% background Detection difference with EASYtouchTM acquisition 21 L-M BACKGROUND SUPPRESSION WITH RED LASER EMISSION The background suppression with red laser emission offers the best precision in terms of resolution and for background suppression, over which the object is not detected. The class 1 laser e m i s s i o n , a c c o r d i n g t o E N 60825-1, guarantees maximum safety for the operators in all applications. DIMENSIONS A C C D INDICATORS AND SETTINGS A B A Output status and LASER ON/ERROR LEDs B Teach-in push-button C M12 connector output D Cable output Teach-in button for setting. EASYtouchTM provides two setting modes: standard or fine. Please refer to instructions manual for operating details. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE REMOTE BLACK REMOTE + 10 ... 30 Vdc (WHITE) (BROWN) 0V (BLUE) NO OUTPUT BLUE 22 NO OUTPUT (BLACK) 10 cm Operating distance: Power supply: Ripple: Consumption: Light emissione: 5 ... 10 cm 10 ... 30 Vdc 1 2 Vpp 60 mA red Laser 650 nm 2 class 1 EN 60825-1 class II CDRH21 CFR 1040.10 approx. 0.5 mm at 6 cm Resolution: Setting: S60-PL-5-M08-PP S60-PL-5-M08-NN S60-PL-2-M08-PP SELECTION TABLE S60-PL-2-M08-NN TECHNICAL DATA axial optics - 2 m cable S60-PL-2-M08-NH S60-PL-2-M08-PH 956201580 956201440 NPN PNP axial optics - M12 connector S60-PL-5-M08-NH 956201280 S60-PL-5-M08-PH 956201160 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue teach-in push-button remote on cable 3 EASYtouchTM Setting procedure: Indicators: yellow OUTPUT LED green / red LASER ON / ERROR LED Output type: PNP, NO NPN, NO 100 mA 2V 500 s 1 kHz Output current: Saturation voltage: Response time: Switching frequency: Operating mode: light with EASYtouchTM dark / light configurable 20 ms minimum output ON Timing function: Auxiliary functions: remote keylock 4 Connection: Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: Operating temperature: Storage temperature: Reference standard: 2 m O 4 mm cable 5 M12 4-pole connector 6 class 2 IP67 A, B 7 ABS window in PMMA 8 TECHNICAL NOTES 1 2 3 4 90 g max. 40 g max. -10 ... +50C -25 ... +70C EN 60947-5-2, EN 60825-1, CDRH21 CFR 1040.10 5 6 7 8 Limit values Average life of 50.000 h with TA = +25 C Connect to 0 V when remote wire not used Active with remote at +Vdc at power on PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection Internal lenses in glass and Polycarbonate II3D DETECTION DIAGRAMS 0 2 4 6 8 % difference object distance 10 10 (cm) Operating distance White 90% / Black 6% White 90% / Grey 18% Setting distance on white 90% background Detection difference with EASYtouchTM acquisition 23 N FORE-BACKGROUND SUPPRESSION WITH RED EMISSION The forground and background suppression proximity allows to precisely adjust the minimum and maximum d e t e c t i o n d i s t a n c e . The EASYtouchTM setting procedure fixes automatically the best detection conditions with medium or high precision, simply pressing once the teach-in push-button. DIMENSIONS A C C D INDICATORS AND SETTINGS A B A Output status and READY/ERROR LEDs B Teach-in push-button C M12 connector output D Cable output Teach-in button for setting. EASYtouchTM provides two setting modes: standard or fine. Please refer to instructions manual for operating details. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 S60-PA-5 BROWN Vdc WHITE REMOTE BLACK REMOTE (WHITE) 0V NO OUTPUT BLUE 24 (BLUE) + 10 ... 30 Vdc (BROWN) NO OUTPUT (BLACK) 20 cm Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimension: Setting: 7 ... 20 cm 10 ... 30 Vdc 1 2 Vpp 50 mA red LED 670 nm 2 approx. 16 mm at 20 cm S60-PA-5-N03-PH S60-PA-5-N03-NH S60-PA-2-N03-PH SELECTION TABLE S60-PA-2-N03-NH TECHNICAL DATA axial optics - 2 m cable S60-PA-2-N03-NH S60-PA-2-N03-PH 956201520 956201370 NPN PNP axial optics - M12 connector S60-PA-5-N03-NH 956201240 S60-PA-5-N03-PH 956201090 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue teach-in push-button remote on cable 3 EASYtouchTM yellow OUTPUT LED green / red READY / ERROR LED Setting procedure: Indicators: Output type: PNP, NO NPN, NO 100 mA 2V 500 s 1 kHz Output current: Saturation voltage: Response time: Max. switching frequency: Operating mode: light with EASYtouchTM dark / light configurable remote keylock 4 Auxiliary functions: Connection: 2 m O 4 mm cable 5 M12 4-pole connector 6 class 2 IP67 A, B 7 ABS window in PMMA 8 Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: TECHNICAL NOTES 1 2 3 4 5 90 g max. 40 g max. -25 ... +55 C -25 ... +70 C EN 60947-5-2 Operating temperature: Storage temperature: Reference standard: 6 7 8 Limit values Average life of 100.000 h with TA = +25 C Connect to 0 V when remote wire not used Active with remote at +Vdc at power on PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection Internal lenses in Polycarbonate DETECTION DIAGRAMS 20 5 10 15 20 (cm) Operating distance nd rou kg c Ba p up s ea n ar ssio pre p d su oun egr For rea na ctio te De rea na sio res Distance 0 mm mm Distance Detection difference Note: in the acquisition mode, the fore-background suppression points are programmable 25 W CONTRAST SENSOR WITH WHITE EMISSION The white light LED emission is designed for the detection of a large number of coloured or greyscale contrasts, in order to detect print registration marks or similar. The patent-covered EASYtouchTM setting procedures automatically selects the best detection conditions, simply by pressing the teach-in push-button once. A higher level of accuracy can be obtained or the dark/light operating mode can be inverted. DIMENSIONS A C A C D INDICATORS AND SETTINGS A B Teach-in button for setting. EASYtouchTM provides two setting modes: standard or fine. Please refer to instructions manual for operating details. A Output status and READY/ERROR LEDs B Teach-in push-button C M12 connector output orientable in two positions D Cable output CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 BROWN S60-PA-5 Vdc WHITE REMOTE REMOTE BLACK NO OUTPUT BLUE 26 REMOTE + 10 ... 30 Vdc (WHITE) (BROWN) 0V (BLUE) NO OUTPUT (BLACK) 19 mm SELECTION TABLE Operating distance: Max. field of depth: Power supply: Ripple: Consumption: Light emission: Spot dimension: Resolution: Setting: Setting procedure: Indicators: 19 mm - 2 mm 10 ... 30 Vdc 1 2 Vpp 30 mA white LED 400 - 700 nm 2 aprox. 3.5 mm at 19 mm 0.5 mm S60-PA-5-W08-PH S60-PA-5-W08-NH S60-PA-2-W08-PH S60-PA-2-W08-NH TECHNICAL DATA contrast sensor - 2 m cable S60-PA-2-W08-NH 956201550 S60-PA-2-W08-PH 956201400 NPN PNP contrast sensor - M12 connector S60-PA-5-W08-NH 95621030 S60-PA-5-W08-PH 95621020 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue teach-in push-button remote on cable 3 EASYtouchTM yellow OUTPUT LED green / red READY / ERROR LED Output type: Output current: Saturation voltage: Response time: Max. switching frequency: Operating mode: Timing function: Auxiliary functions: PNP, NO NPN, NO 100 mA 2V 100 s 5 kHz dark with EASYtouchTM automatic dark / light with fine acquisition 20 ms minimum output ON remote keylock 4 Connection: Operating temperature: Storage temperature: Reference standard: TECHNICAL NOTES 1 2 3 4 5 90 g max. 40 g max. -25 ... +55C -25 ... +70C EN 60947-5-2 6 7 8 Limit values Average life of 100.000 h with TA = +25 C Connect to 0 V when remote wire not used Active with remote at +Vdc at power on PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection Internal lenses in glass DETECTION DIAGRAMS Relative received signal Electrical protection: Mechanical protection: Protection devices: Housing material: Lens materiale: Weight: 2 m O 4 mm cable5 M12 4-pole connector 6 class 2 IP67 A, B 7 ABS window in glass (tilted anti-reflection) 8 Distance Contrast sensor 27 U LUMINESCENCE SENSOR WITH UV EMISSION The UV light LED emission detects any luminescent reference, even on very reflective surfaces, such as ceramics, metal or mirrored glass. The patent-covered EASYtouchT M setting procedures fixes automatically the best detection conditions, simply by pressing the teach-in push-button once, with the reference to detect. The threshold between two different luminescence degrees can be set by a second pressure of the button DIMENSIONS A C A C D INDICATORS AND SETTINGS A B Teach-in button for setting. EASYtouchTM provides two setting modes: standard or fine. Please refer to instructions manual for operating details. A Output status and READY/ERROR LEDs B Teach-in push-button C M12 connector output orientable in two positions D Cable output CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 BROWN S60-PA-5 Vdc WHITE REMOTE REMOTE BLACK NO OUTPUT BLUE 28 REMOTE + 10 ... 30 Vdc (WHITE) (BROWN) 0V (BLUE) NO OUTPUT (BLACK) 40 mm SELECTION TABLE Operating distance: Power supply : Ripple: Consumption: Light emission: Spot dimension: Resolution: Setting: Setting procedure: Indicators: 0 ... 40 mm 10 ... 30 Vdc 1 2 Vpp 30 mA LED UV 370 nm 2 approx. 1.5 mm at 10 mm (max. signal) 0.5 mm S60-PA-5-U08-PH S60-PA-5-U08-NH S60-PA-2-U08-PH S60-PA-2-U08-NH TECHNICAL DATA luminescence sensor - 2 m cable S60-PA-2-U08-NH 956201540 S60-PA-2-U08-PH 956201390 NPN PNP luminescence sensor - M12 connector S60-PA-5-U08-NH 956201010 S60-PA-5-U08-PH 956201000 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue teach-in push-button remote on cable 3 EASYtouchTM yellow OUTPUT LED green / red READY / ERROR LED Output type: Output current: Saturation voltage: Response time: Max. switching frequency: Operating mode: Timing function: Auxiliary functions: PNP, NO NPN, NO 100 mA 2V 250 s 2 kHz light with EASYtouchTM automatic dark / light with fine acquisition 20 ms minimum output ON remote keylock 4 Connection: Operating temperature: Storage temperature: Reference standard: TECHNICAL NOTES 1 2 3 4 5 90 g max. 40 g max. -25 ... +55 C -25 ... +70 C EN 60947-5-2 6 7 8 Limit values Average life of 100.000 h with TA = +25 C Connect to 0 V when remote wire not used Active with remote at +Vdc at power on PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection Internal lenses in glass DETECTION DIAGRAMS Relative received signal Electrical protection: Mechanical protection: Protection devices: Housing material: Lens material: Weight: 2 m O 4 mm cable 5 M12 4-pole connector 6 class 2 IP67 A, B 7 ABS window in glass (tilted anti-reflection) 8 Distance Luminescence sensor 29 Y DISTANCE SENSOR WITH RED EMISSION This sensor gives an analogue 0-10 Vdc output proportional to the target distance in the measurement range, with the possibility of setting a threshold for the other switching output. The yellow LED indicates the activation of the output during switching while the red LED turns on when the object is outside the measurement range. DIMENSIONS A C C D INDICATORS AND SETTINGS A B A Output status and range LEDs B Teach-in push-button C M12 connector output D Cable output Teach-in button for setting. EASYtouchTM provides two setting modes: standard or fine. Please refer to instructions manual for operating details. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue S60-PA-2 BROWN S60-PA-5 Vdc ANALOGUE OUTPUT WHITE (WHITE) + 18 ... 30 Vdc (BROWN) ANALOGUE OUTPUT 0V - BLACK NO OUTPUT BLUE 30 (BLUE) NO OUTPUT (BLACK) 150 mm SELECTION TABLE Operating distance: Power supply: Ripple: Consumption: Light emission: Spot dimensions: Setting: Setting procedure: Indicators: 50 ... 150 mm1 18 ... 30 Vdc 2 2 Vpp 60 mA red LED 670 nm 3 approx. 16 mm at 150 mm teach-in push-button EASYtouchTM S60-PA-5-Y03-PV S60-PA-5-Y03-NV S60-PA-2-Y03-PV S60-PA-2-Y03-NV TECHNICAL DATA distance sensor - 2 m cable S60-PA-2-Y03-NV 956201680 S60-PA-2-Y03-PV 956201690 NPN PNP distance sensor - M12 connector S60-PA-5-Y03-NV 956201700 S60-PA-5-Y03-PV 956201710 NPN PNP All the ordering codes and information are summarised in the last pages of this catalogue yellow OUTPUT LED red FIELD LED Output type: Minimum resistance load: Output current: Saturage voltage: Response time: Switching frequency: Resolution: Operating mode: PNP, NO NPN, NO analogue with 0 ... 10 V (8 bit) 1 K 100 mA 2V 1 ms 500 Hz 1 mm (linearity 2.5 %) light with EASYtouchTM automatic dark / light fine acquisition configurable direct/inverse proportionality Switching output hysterisis: 10 % max. Connection: 2 m O 4 mm cable 4 M12 4-pole connector 5 Electrical protection: class 2 Mechanical protection: IP67 Protection devices: A, B 6 Housing material: ABS Lens material: window in PMMA 7 Weight: 90 g max. 40 g max. Operating temperature: -25 ... +55C Storage temperature: -25 ... +70C Reference standard: EN 60947-5-2 TECHNICAL NOTES 1 2 3 4 5 6 7 Measurement field can be reduced at device setting Limit values Average life of 100.000 h with TA = +25 C PVC, 4 x 0.14 mm2 Connector can be blocked on two positions A - reverse polarity protection B - overload and short-circuit protection Internal lenses in Polycarbonate II3D DETECTION DIAGRAMS 150 50 100 150 200 (mm) Operating distance Voltage (V) 0 mm Distance Analogue output on max. measurement range in inverse proportionality 31 TECHNOLOGY ADVANTAGES The S60 series establishes the new market standard in the compact 50 x 50 mm fotoelectric sensors, offering a complete family of optic functions with only 15 mm housing width. The standard dimensions, reduced housing width and the multi-hole fixing system make the S60 series compatible with the majority of compact sensors present on the market. COMPACT PHOTOELECTRIC SENSORS STANDARD 50 x 50 x 15 mm (mm) All the models are available in cable or M12 connector versions, with NPN or PNP type static output, conforming to the EN 60947-5-2 European standard. The M12 connector can be easily rotated to 90 and can be blocked in the straight or right-angle positions respect to the optic axis, the cable emerges at 45 and thanks to its flexibility can rotate pratically 360. Thanks to these characteristics the sensor can be easily fixed on all sides and at all angles. All the basic optic functions such as the through beam, polarised retroreflex, diffuse proximity and background suppression are available also in the version with visible red laser emission, with all the safety charateristics for the user in class 1 conforming to the EN 60825-1 European standard and in class II according to CDRH21 CFR Part 1040 USA standard. Besides the evident advantages for the alignment of sensors and of the object to detect, thanks to the high spot visibility and concentration, the laser emissions offer an improved detection resolution, millimetric for the through beam and polarised retroreflex versions, or decimillimetric for the diffuse proximity and background suppression. The polarised retroreflex model is available also in the coaxial optic version that, with the emitter optic axis coinciding with the receiver one, offers a better detection axis precision and the elimination of the blind zone near to the sensor. 32 TECHNOLOGY ADVANTAGES The coaxial optics is present also in the polarised retroreflex model for the detection of transparent objects, notably increasing the performances of this optic function and its immunity to object movements inside the detection area. The contrast sensor with white LED emission has an operating distance ranging from 17 to 21 mm and detects coloured or grey-scale marks, with a minimum dimension of 0.5 mm and an operating frequency reaching 5 kHz. The luminescence sensor with UV LED emission has an operating distance ranging from 0 to 40 mm and detects fluorescent or luminescent targets, with a minimum dimension of 0.5 mm and an operating frequency reaching 2 kHz. The setting of these sensors is extremely rapid and easy, thanks to the patent-covered EASYtouchTM system that alllows to automatically fix the object detection threshold, with a single pressure of the teach-in push-button. It is possibile to set the sensor to detect more critical differences between the mark and the background, or invert the dark or light operating mode, by pressing twice the push-button. The EASYtouchTM system allows to select the `Remote' function for the remote sensor setting through the cable or connector, the `Keylock' function to block the keyboard, `Delay OFF' function for the 20 ms timing of the output deactivation. The sensor technology with background and/or foreground suppression of the S60 series has allowed to develop also a cost-effective distance sensor with a double output: a 0 - 10 V analogue output and a digital NPN or PNP switching output. The measurement range and the switching threshold output can be selected in the 50 - 150 mm range, with a 1 mm precision; the direct or inverse proportionality and the light or dark operating mode can be selected. SMT chip-size for the electronic miniaturisation and more space for the optics COAXIAL OPTICS BIAXIAL OPTICS Complete external shield for high electromagnetic compatibility 33 ACCESSORIES DIMENSIONS JOINT-60 ST-504 ST-5018 ST-5019 ST-5020 ST-5021 34 ACCESSORIES The series is compatible with the following Datasensor accessories (refer General Catalogue) - CS connectors - R reflectors New accessories dedicated to the S60 series have been developed to cover all the fixing requirements and improve functioning. ACCESSORIES SELECTION TABLE AND ORDER INFORMATION MODEL ST-5018 ST-5019 ST-5020 ST-5021 JOINT-60 ST-504 DESCRIPTION protection bracket protection bracket fixing bracket fixing bracket protection bracket with jointed support S6/S60 fixing bracket ORDER N 95ACC5310 95ACC5320 95ACC5330 95ACC5340 95ACC5350 95ACC1320 MODEL CODING TABLE S60-PA-2-B01-NN HOUSING P = plastic flat OPTICS A = normal L = laser OPTIC FUNCTION refer to INDEX ALPHABETICAL MODEL INDEX CONNECTION 2 = cable 5 = M12 connection SETTING 0 = fixed 1 = trimmer 3 = tteach-in push-button 8 = teach-in push-button with delay-OFF function INPUTS / OUTPUTS NH = NPN NO output with REMOTE SET input PH = PNP NO with REMOTE SET input NN = NPN NO-NC output PP = PNP NO-NC output NV = NPN NO output with 0-10 V output PV = PNP NO output with 0-10 V output XG = no output test input Note: Not all code combinations are available. Please refer to alphabetical model index for the list of available models. 35 UNI EN ISO9001 FUNCTION polarised retroreflex polarised retroreflex coaxial polarised retroreflex coaxial polarised retroreflex diffuse proximity diffuse proximity long diffuse proximity long diffuse proximity recevier recevier emitter background suppression background suppression fore-background suppression fore-background suppression retroreflex for transparents retroreflex for transparents luminescence sensor luminescence sensor contrast sensor contrast sensor distance sensor distance sensor polarised retroreflex polarised retroreflex coaxial polarised retroreflex coaxial polarised retroreflex diffuse proximity diffuse proximity long diffuse proximity long diffuse proximity recevier recevier emitter background suppression background suppression fore-background suppression fore-background suppression retroreflex for transparents retroreflex for transparents luminescence sensor luminescence sensor contrast sensor contrast sensor distance sensor distance sensor laser polarised retroreflex laser polarised retroreflex laser diffuse proximity laser diffuse proximity laser receiver laser receiver laser emitter laser background suppression laser background suppression laser polarised retroreflex laser polarised retroreflex laser diffuse proximity laser diffuse proximity laser receiver laser receiver laser emitter laser background suppression laser background suppression CONNECTION cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable cable M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector cable cable cable cable cable cable cable cable cable M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector M12 connector OUTPUT NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP N ORDER 956201460 956201300 956201610 956201600 956201470 956201310 956201480 956201320 956201490 956201330 956201340 956201500 956201350 956201520 956201370 956201530 956201380 956201540 956201390 956201550 956201400 956201680 956201690 956201180 956201040 956201630 956201620 956201190 956201050 956201200 956201110 956201210 956201060 956201070 956201220 956201080 956201240 956201090 956201250 956201100 956201010 956201000 956201030 956201020 956201700 956201710 956201560 956201410 956201640 956201650 956201570 956201420 956201430 956201580 956201440 956201260 956201120 956201660 956201670 956201270 956201140 956201150 956201280 956201160 PAGE 6 6 8 8 14 14 16 16 2 2 2 20 20 24 24 12 12 28 28 26 26 30 30 6 6 8 8 14 14 16 16 2 2 2 20 20 24 24 12 12 28 28 26 26 30 30 10 10 18 18 4 4 4 22 22 10 10 18 18 4 4 4 22 22 UNI EN ISO14000 Distributed by: HEADQUARTERS DATASENSOR SpA via Lavino, 265 - 40050 Monte San Pietro, BO - Italy Tel. +39 051/6765611 * Fax +39 051/6759324 www.datasensor.com * e-mail info@datasensor.com Datasensor SpA endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use Datasensor SpA can guarantee only the data indicated in the instruction manual supplied with the products. Printed in Italy in January 2005 Rev. 01 MODEL S60-PA-2-B01-NN S60-PA-2-B01-PP S60-PA-2-B51-NN S60-PA-2-B51-PP S60-PA-2-C01-NN S60-PA-2-C01-PP S60-PA-2-C11-NN S60-PA-2-C11-PP S60-PA-2-F01-NN S60-PA-2-F01-PP S60-PA-2-G00-XG S60-PA-2-M08-NH S60-PA-2-M08-PH S60-PA-2-N03-NH S60-PA-2-N03-PH S60-PA-2-T51-NN S60-PA-2-T51-PP S60-PA-2-U08-NH S60-PA-2-U08-PH S60-PA-2-W08-NH S60-PA-2-W08-PH S60-PA-2-Y03-NV S60-PA-2-Y03-PV S60-PA-5-B01-NN S60-PA-5-B01-PP S60-PA-5-B51-NN S60-PA-5-B51-PP S60-PA-5-C01-NN S60-PA-5-C01-PP S60-PA-5-C11-NN S60-PA-5-C11-PP S60-PA-5-F01-NN S50-PA-5-F01-PP S60-PA-5-G00-XG S60-PA-5-M08-NH S60-PA-5-M08-PH S60-PA-5-N03-NH S60-PA-5-N03-PH S60-PA-5-T51-NN S60-PA-5-T51-PP S60-PA-5-U08-NH S60-PA-5-U08-PH S60-PA-5-W08-NH S60-PA-5-W08-PH S60-PA-5-Y03-NV S60-PA-5-Y03-PV S60-PL-2-B01-NN S60-PL-2-B01-PP S60-PL-2-C01-NN S60-PL-2-C01-PP S60-PL-2-F01-NN S60-PL-2-F01-PP S60-PL-2-G00-XG S60-PL-2-M08-NH S60-PL-2-M08-PH S60-PL-5-B01-NN S60-PL-5-B01-PP S60-PL-5-C01-NN S60-PL-5-C01-PP S60-PL-5-F01-NN S50-PL-5-F01-PP S60-PL-5-G00-XG S60-PL-5-M08-NH S60-PL-5-M08-PH UNIVERSAL COMPACT SENSORS ALPHABETICAL MODEL INDEX